The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-19-2011, 05:30 PM   #1
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
traction bar set up ?s

I have an 85 c10. I went from a 30x12.50 to a 28x10.50 tire and also a different offset wheel. I am going to do a spring under set up to lower the rear of my truck another 4-5 inches. These are the traction bars i have now:





Will these still work with a spring under set up?
IF not, Whats should a use?
JBRAVO383 is offline   Reply With Quote
Old 03-19-2011, 07:17 PM   #2
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: traction bar set up ?s

they should....might be alot closer to the ground tho...you could allways cut a couple inches out of the mounts and weld them back up.
mooseknuckles is offline   Reply With Quote
Old 03-19-2011, 07:20 PM   #3
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: traction bar set up ?s

like this
Attached Images
 
mooseknuckles is offline   Reply With Quote
Old 03-19-2011, 08:40 PM   #4
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: traction bar set up ?s

Cal tracs Work!
KQQL IT is offline   Reply With Quote
Old 03-20-2011, 07:46 PM   #5
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
Re: traction bar set up ?s

Okay thank you. How much was that cal trac set up?
JBRAVO383 is offline   Reply With Quote
Old 03-20-2011, 07:51 PM   #6
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: traction bar set up ?s

http://calvertracing.com/cart/index....products_id=29

And i believe a board vendor may carry them also.
I can say my 73 hooks hard enough to spin the wheel inside the tire.
KQQL IT is offline   Reply With Quote
Old 03-20-2011, 08:31 PM   #7
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: traction bar set up ?s

I have custom made tracion bars. The front stopper is on the leaf not the mounting point.



Mine are also nice and tucked up on the leafs.


The design has a large U directly under the axel tube. The tube actually "hooks" by hitting the U. The U cradles the axel. I need to retake some pictures and post them.
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 03-20-2011, 10:44 PM   #8
bigblockrock
Registered User
 
bigblockrock's Avatar
 
Join Date: Feb 2011
Location: Flint, MI
Posts: 22
Re: traction bar set up ?s

x2 on the caltrac setup. My brothers truck hooks real hard with them. I believe lakewood also makes traction bars for our trucks with axles on top of the springs.
bigblockrock is offline   Reply With Quote
Old 03-20-2011, 11:32 PM   #9
3r!c84
Badass
 
3r!c84's Avatar
 
Join Date: Jan 2009
Location: lox. fl
Posts: 4,586
Re: traction bar set up ?s

man you could make a set of caltacs they look simple!
__________________
Think outside the box?
-84c10 (1stcar)→My Build
-00 Saturn 5spd

drop a gear and disappear!

1/4:13:90
3r!c84 is offline   Reply With Quote
Old 03-22-2011, 06:30 PM   #10
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
Re: traction bar set up ?s

They do look pretty simple to make, does anyone have any more pictures of there set up?
JBRAVO383 is offline   Reply With Quote
Old 03-22-2011, 09:08 PM   #11
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
Re: traction bar set up ?s

Forum Vendor Capt Kaos is a dealer for Cal-Tracs. Get with him for a good price and great service.
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 03-22-2011, 09:35 PM   #12
my4by2
Registered User
 
my4by2's Avatar
 
Join Date: Dec 2010
Location: Hot Springs, AR.
Posts: 1,215
Re: traction bar set up ?s

Here's the set-up I am running. First pic is them on another truck just because it's finished & mine isn't. The kit is from WFO Concepts - they are the shop building my truck. Mine is a 4x4, but they'd work as well on a 2WD version. Very nice set-up if you can do your own welding or know someone who can. Just a thought for you to consider.
Attached Images
  
__________________
1977 Chevrolet K30 LWB Crew Cab
497HP Mast Motorsports 6.0L LY6 HO engine
GM NV4500 5-speed, Centerforce clutch + NP205
D60 + 14-bolt FF w/ Eaton posi + disc brakes
Skyjacker 2.5" full spring lift w/ Nitro shocks
Custom paint + interior
http://67-72chevytrucks.com/vboard/s...d.php?t=435722
my4by2 is offline   Reply With Quote
Old 03-23-2011, 02:55 AM   #13
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
Re: traction bar set up ?s

That looks real good my4by2
JBRAVO383 is offline   Reply With Quote
Old 03-23-2011, 03:03 AM   #14
Altec
Getcha Pull
 
Altec's Avatar
 
Join Date: Nov 2010
Location: MD
Posts: 691
Re: traction bar set up ?s

Quote:
Originally Posted by JBRAVO383 View Post
That looks real good my4by2
Ditto. That looks clean! I dig how the upper link is adjustable.
__________________
'81 K10 454/SM465
'86 S10 Blazer
'95 H-D Softail
'96 Integra

Last edited by Altec; 03-23-2011 at 03:46 AM.
Altec is offline   Reply With Quote
Old 03-23-2011, 03:24 AM   #15
my4by2
Registered User
 
my4by2's Avatar
 
Join Date: Dec 2010
Location: Hot Springs, AR.
Posts: 1,215
Re: traction bar set up ?s

Yeah, I really liked the way it's built & the built-in adjustability. I had a set of CalTracs on my '07 Dodge Ram & they were pretty good as well. Think these are much better though in how they are built & designed - they're also a lot more unique. You can find these at: http://www.wfoconcepts.com/cr/Torque-Arms/4140/3857 if you're interested - or just call Trevor at the shop.
my4by2 is offline   Reply With Quote
Old 03-23-2011, 10:05 AM   #16
hotrodbones
Registered User
 
Join Date: Oct 2010
Location: Jax FL
Posts: 8
Re: traction bar set up ?s

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Last edited by Liz; 03-23-2011 at 03:30 PM. Reason: fs
hotrodbones is offline   Reply With Quote
Old 03-23-2011, 10:16 AM   #17
my4by2
Registered User
 
my4by2's Avatar
 
Join Date: Dec 2010
Location: Hot Springs, AR.
Posts: 1,215
Re: traction bar set up ?s

Quote:
Originally Posted by hotrodbones View Post
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.
Uh-oh, think I see the flashing blue lights of the "thread police" coming up behind you.... CalTrac bars are pretty nice though - made my Ram 3500 ride & hook up much better overall.
my4by2 is offline   Reply With Quote
Old 03-24-2011, 01:44 AM   #18
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
Re: traction bar set up ?s

Yeah apparently! But yeah i like the look of that set up.. and it also looks like it would be pretty easy to build my own. I will be looking into that some more.
My neighbor just gave me the Ford 9" out of his 78 bronco, so now I'm trying to figure out what its going to take to put that in my truck and How much a gear set and Detroit is going to run me.
JBRAVO383 is offline   Reply With Quote
Old 03-24-2011, 08:01 AM   #19
BigBlocksRule
Registered User
 
Join Date: Jun 2008
Location: Lubbock, TX
Posts: 2,047
Re: traction bar set up ?s

Cal-Tracs are the cat's a$$. Ride great on the street, easy to adjust. They're made for conventional or axle/spring flip, too.
BigBlocksRule is offline   Reply With Quote
Old 03-25-2011, 10:21 AM   #20
JBRAVO383
Registered User
 
JBRAVO383's Avatar
 
Join Date: Sep 2009
Location: St. Louis, Mo
Posts: 39
Re: traction bar set up ?s

Does anyone know anything about these ?
http://www.ballisticfabrication.com/...it_p_1822.html
__________________
Thanks,
John
85' c10 swb 383 th400 ran:
13.26 @ 99 w/ a 1.8 60'
JBRAVO383 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com