VA Tilt column blowout - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-20-2011, 01:39 PM

I need to fund my project so my stash of tilts needs to be thinned

I'm not going to give them away as I have 3 swap meets upcoming I am sure I can unload them at....but would like to offer here first

Pictures this evening

True 67-72 4spd tilt, got in trade for buddy buckets....I have not gone through it but tilt seems tight and has a new in pkg tilt lever. No turn signal lever/guts and no horn guts. Cosmetically looks nice other than one dent on the upper sleeve. 395 picked up or 440 shipped with insurance

True 67-72 column shift tilt. Came out of my 72 super cheyenne. Mising all levers and indicator/housing. Tilt is tight but I do not know condition of horn button or wiring (it isn't cut though) $275 picked up or 305 shipped with no levers. Has a later model wheel on it I will include for free local or $20 extra shipping. Intermediate shaft not included.

Van column shift tilt. Tight tilt and bearings. Has the correct wiring for our trucks. Levers are the short style shifter (which I prefer anyways) and all are in nice shape. Can be put in a truck and run as is, or you can collapse the intermediate shaft so it doesn't stick out as far, or can cut it down to the size of a true truck tilt
Asking 225 picked up or 265 shipped with all levers still installed-ready to bolt in.

1972K20 · 03-20-2011, 01:49 PM

Will you go $400.00 shipped on the 4spd tilt? Any pics?

Thanks

VA72C10 · 03-20-2011, 01:50 PM

Quote:

Originally Posted by 1972K20

Will you go $400.00 shipped on the 4spd tilt? Any pics?

Thanks

Pictures coming this evening per my post

I will give it a day or two and if no takers at my original price I'll do the 400 shipped.

1972K20 · 03-20-2011, 01:52 PM

Ok, I look forward to the pics

Thanks!

mo · 03-20-2011, 01:56 PM

put me in line for the 4 speed tilt column...i'll wait for pics

**jerry moss** · 03-20-2011, 02:41 PM

my rebuilt 4 speed tilt was 400.00 plus shipping over 10 years ago. very good price on a hard to find item.

kilomanjaro · 03-20-2011, 04:09 PM

I am not sure where I am at in line....I would take the 4-speed tilt for $440 shipped...pending pictures.
Thanks
John

VA72C10 · 03-20-2011, 06:52 PM

going to take pics as of now. As of now since 1972K20 pm'd me the line is

1972K20
mo
kilomanjaro

Thanks...pictures in a few...

VA72C10 · 03-20-2011, 08:01 PM

well, a couple of edits to note: the auto tilt column is missing the indicator also so I will lower that by $25

The 4spd tilt looks good but does have a dent I didn't originally notice in the top collar. Also I see no horn wiring and the turn signal cam is also removed. I am still asking the same for that for now.

4spd tilt

column shift van tilt

van column shift tilt

kilomanjaro · 03-20-2011, 09:09 PM

Is there any wiring there on the 4-speed column? I don't see the turn signal plug or horn wire.
John

VA72C10 · 03-20-2011, 09:20 PM

No, the turn signal and horn guts have the wires attached to them. As mentioned there aren't any guts...

kilomanjaro · 03-20-2011, 09:49 PM

I can't do $440 as it is....PM Sent.
Thanks
John

1972K20 · 03-20-2011, 09:53 PM

VA72C10,

The pics look good. I'll take the 4spd tilt for 440.

VA72C10 · 03-20-2011, 10:00 PM

4spd tilt Sold! pm sent. Thanks

VA72C10 · 03-21-2011, 11:57 PM

ttt for auto van tilt and auto true truck tilt

VA72C10 · 03-22-2011, 11:23 PM

ttt

redbaron69 · 03-23-2011, 10:00 PM

pm sent on truck tilt

mo · 03-23-2011, 10:05 PM

Good Deal!

VA72C10 · 03-25-2011, 04:19 PM

Quote:

Originally Posted by redbaron69

pm sent on truck tilt

pm returned

Quote:

Originally Posted by mo

Good Deal!

Thanks

Truck tilt pictured is now unavailable. Going to be swapped for a restored column....so I will be posting my really nice original column later....has the shift handle and indicator and is very nice overall. Will be asking 320 picked up for that one.

1972K20 · 03-25-2011, 05:56 PM

VA72C10,

Received the 4spd tilt. It looks good.

VA72C10 · 03-25-2011, 07:43 PM

Quote:

Originally Posted by 1972K20

VA72C10,

Received the 4spd tilt. It looks good.

Cool. Did you notice the inner box? I had a truck tilt shipped to me with no padding in the inner box

Added some padding and then threw it in another box to make sure it would arrive safely.

junkyardjohn · 03-26-2011, 10:48 AM

I try to pack stuff the way I would like to recieve it. It all boils down, back to the GOLDEN RULE we all learned back in the sandbox days.

John

1972K20 · 03-26-2011, 11:05 AM

Quote:

Originally Posted by VA72C10

Cool. Did you notice the inner box? I had a truck tilt shipped to me with no padding in the inner box

Added some padding and then threw it in another box to make sure it would arrive safely.

I did notice.

It was packed very well. Thanks!

VA72C10 · 04-01-2011, 11:36 PM

ttt

03-20-2011, 01:39 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Tilt column blowout I need to fund my project so my stash of tilts needs to be thinned I'm not going to give them away as I have 3 swap meets upcoming I am sure I can unload them at....but would like to offer here first Pictures this evening True 67-72 4spd tilt, got in trade for buddy buckets....I have not gone through it but tilt seems tight and has a new in pkg tilt lever. No turn signal lever/guts and no horn guts. Cosmetically looks nice other than one dent on the upper sleeve. 395 picked up or 440 shipped with insurance True 67-72 column shift tilt. Came out of my 72 super cheyenne. Mising all levers and indicator/housing. Tilt is tight but I do not know condition of horn button or wiring (it isn't cut though) $275 picked up or 305 shipped with no levers. Has a later model wheel on it I will include for free local or $20 extra shipping. Intermediate shaft not included. Van column shift tilt. Tight tilt and bearings. Has the correct wiring for our trucks. Levers are the short style shifter (which I prefer anyways) and all are in nice shape. Can be put in a truck and run as is, or you can collapse the intermediate shaft so it doesn't stick out as far, or can cut it down to the size of a true truck tilt Asking 225 picked up or 265 shipped with all levers still installed-ready to bolt in. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-20-2011 at 08:03 PM.

03-20-2011, 01:49 PM	#2
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Tilt column blowout Will you go $400.00 shipped on the 4spd tilt? Any pics? Thanks

03-20-2011, 01:52 PM	#4
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Tilt column blowout Ok, I look forward to the pics Thanks!

03-20-2011, 01:56 PM	#5
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Tilt column blowout put me in line for the 4 speed tilt column...i'll wait for pics

03-20-2011, 02:41 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,949	Re: Tilt column blowout my rebuilt 4 speed tilt was 400.00 plus shipping over 10 years ago. very good price on a hard to find item. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-20-2011, 04:09 PM	#7
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout I am not sure where I am at in line....I would take the 4-speed tilt for $440 shipped...pending pictures. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 06:52 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout going to take pics as of now. As of now since 1972K20 pm'd me the line is 1972K20 mo kilomanjaro Thanks...pictures in a few... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 08:01 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout well, a couple of edits to note: the auto tilt column is missing the indicator also so I will lower that by $25 The 4spd tilt looks good but does have a dent I didn't originally notice in the top collar. Also I see no horn wiring and the turn signal cam is also removed. I am still asking the same for that for now. 4spd tilt column shift van tilt van column shift tilt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 09:09 PM	#10
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout Is there any wiring there on the 4-speed column? I don't see the turn signal plug or horn wire. John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 09:20 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout No, the turn signal and horn guts have the wires attached to them. As mentioned there aren't any guts... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 09:49 PM	#12
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout I can't do $440 as it is....PM Sent. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 09:53 PM	#13
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Tilt column blowout VA72C10, The pics look good. I'll take the 4spd tilt for 440.

03-20-2011, 10:00 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout 4spd tilt Sold! pm sent. Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-21-2011 at 11:57 PM.

03-21-2011, 11:57 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt for auto van tilt and auto true truck tilt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-22-2011, 11:23 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

03-23-2011, 10:00 PM	#17
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Tilt column blowout pm sent on truck tilt __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

03-23-2011, 10:05 PM	#18
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Tilt column blowout Good Deal!

03-25-2011, 05:56 PM	#20
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Tilt column blowout VA72C10, Received the 4spd tilt. It looks good.

03-26-2011, 10:48 AM	#22
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: Tilt column blowout I try to pack stuff the way I would like to recieve it. It all boils down, back to the GOLDEN RULE we all learned back in the sandbox days. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-26-2011 at 10:49 AM.

04-01-2011, 11:36 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.