MO Inline Six Carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyull67 · 03-21-2011, 10:57 AM

Carburetor from a 1968 250ci inline six. Will need a rebuild/cleaning.
$30 plus shipping. Comes with intake manifold if you need it.

kyull67 · 03-23-2011, 01:02 AM

ttt

**70STOVEBOLT** · 03-23-2011, 12:53 PM

Are you selling the exhaust manifold also?

kyull67 · 03-23-2011, 08:18 PM

Sure, but it's not in good shape. Would need to be drilled and tapped at the flange. Also weighs a lot for shipping. I can take more pictures if you'd like.

**70STOVEBOLT** · 03-24-2011, 01:07 PM

You are talking about the flange where the exhaust pipe connects? How bad is it? Just a broken bolt/stud? Mine is leaking around the shaft for the butterfly valve. How is yours in
that area (at the front, under the intake manifold)?

LandonL · 03-24-2011, 04:10 PM

I'll buy it pending the shipping quote, do I get EVERYTHING pictured? Like the entire choke setup that bolts to the exhaust manifold etc (heat stove)? Thanks!
Shipping to 31211, if it's significantly cheaper I can live without the manifold.

kyull67 · 03-24-2011, 09:29 PM

yes, everything. I only need the cylinder head. I'll get a quote worked up for you tomorrow.

LandonL · 03-24-2011, 09:34 PM

I would prefer to get just the carb, I don't really need the intake. The choke hardware and throttle stuff of course & all bolts associated. Been looking for a setup like this forever! Thanks.

kyull67 · 03-25-2011, 11:30 AM

Quote:

Originally Posted by 70STOVEBOLT

You are talking about the flange where the exhaust pipe connects? How bad is it? Just a broken bolt/stud? Mine is leaking around the shaft for the butterfly valve. How is yours in
that area (at the front, under the intake manifold)?

Yes on the flange, just a broken stud. Not sure on its working condition as I've never had it on a running engine. Seems to move freely though. I'll get the parts all taken off today and let you know.

kyull67 · 03-25-2011, 11:31 AM

Quote:

Originally Posted by LandonL

I would prefer to get just the carb, I don't really need the intake. The choke hardware and throttle stuff of course & all bolts associated. Been looking for a setup like this forever! Thanks.

Sounds good. I have this same exact carb on my '63 and it runs great. I'll contact you later through pm.

kyull67 · 03-25-2011, 06:24 PM

Here are the pictures.

LandonL · 03-25-2011, 11:31 PM

In that second picture, did the rod connecting the heat stove to the carb get bent or is that just the picture angle? If it's fine, I'll take it for $30 no problem plus ship.

kyull67 · 03-26-2011, 12:08 PM

It's just the angle of the picture.

LandonL · 03-26-2011, 02:22 PM

Alright cool, how would you like to be paid? I have paypal, and what will the shipping cost be?

kyull67 · 03-26-2011, 06:25 PM

sent you a pm

**70STOVEBOLT** · 03-28-2011, 11:02 AM

I'm going to pass on the exhaust manifold. Thanks for going to the trouble of taking pics.

Thanks,
Mark

03-21-2011, 10:57 AM	#1
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Inline Six Carb Carburetor from a 1968 250ci inline six. Will need a rebuild/cleaning. $30 plus shipping. Comes with intake manifold if you need it. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-23-2011, 01:02 AM	#2
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb ttt __________________ The first '67 The current '67 '63 Biscayne

03-23-2011, 12:53 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: Inline Six Carb Are you selling the exhaust manifold also? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-23-2011, 08:18 PM	#4
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb Sure, but it's not in good shape. Would need to be drilled and tapped at the flange. Also weighs a lot for shipping. I can take more pictures if you'd like. __________________ The first '67 The current '67 '63 Biscayne

03-24-2011, 01:07 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: Inline Six Carb You are talking about the flange where the exhaust pipe connects? How bad is it? Just a broken bolt/stud? Mine is leaking around the shaft for the butterfly valve. How is yours in that area (at the front, under the intake manifold)? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-24-2011, 04:10 PM	#6
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Inline Six Carb I'll buy it pending the shipping quote, do I get EVERYTHING pictured? Like the entire choke setup that bolts to the exhaust manifold etc (heat stove)? Thanks! Shipping to 31211, if it's significantly cheaper I can live without the manifold. __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640 Last edited by LandonL; 03-24-2011 at 09:29 PM.

03-24-2011, 09:29 PM	#7
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb yes, everything. I only need the cylinder head. I'll get a quote worked up for you tomorrow. __________________ The first '67 The current '67 '63 Biscayne

03-24-2011, 09:34 PM	#8
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Inline Six Carb I would prefer to get just the carb, I don't really need the intake. The choke hardware and throttle stuff of course & all bolts associated. Been looking for a setup like this forever! Thanks. __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

03-25-2011, 06:24 PM	#11
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb Here are the pictures. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-25-2011, 11:31 PM	#12
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Inline Six Carb In that second picture, did the rod connecting the heat stove to the carb get bent or is that just the picture angle? If it's fine, I'll take it for $30 no problem plus ship. __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640 Last edited by LandonL; 03-25-2011 at 11:32 PM.

03-26-2011, 12:08 PM	#13
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb It's just the angle of the picture. __________________ The first '67 The current '67 '63 Biscayne

03-26-2011, 02:22 PM	#14
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Inline Six Carb Alright cool, how would you like to be paid? I have paypal, and what will the shipping cost be? __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

03-26-2011, 06:25 PM	#15
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Inline Six Carb sent you a pm __________________ The first '67 The current '67 '63 Biscayne

03-28-2011, 11:02 AM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: Inline Six Carb I'm going to pass on the exhaust manifold. Thanks for going to the trouble of taking pics. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.