WA Free burb stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 03-29-2011, 10:37 PM

Just drug another burb crewcab donor in and I do not need anything behind the rear door.. so its all free... soft ray quarter glass, upper hatch with some minor pinholes,(not rust showing on the outer skin) lower gate with key, big dent but not rusted out, center seat (rear ones gone), tail lite patch panels etc.
The only catch is.. you pull/cut/sawzall etc and.. you haul.. sorry no shipping on any of this..

Did I mention its free???

Livrat · 03-29-2011, 10:38 PM

more pics

**too much stuff** · 03-29-2011, 11:03 PM

Nice gesture!!! Wish i was closer. Looks like interior panels and retainers even. Lots of seat belts, lots of good stuff.

**Classic Bowties** · 03-30-2011, 02:07 AM

Hi Mark, I am in for that pictured mid short seat w/brackets, can I at least buy the hold downs if they were present? Would also like to purchase a few other pieces off of this burb, will give you a ring in the morn. Mel

dave666693 · 03-30-2011, 07:21 AM

are the rear Burb seats the same as a Blazer rear seat?

dubds10 · 03-30-2011, 10:06 AM

Man I'll take it all for my project if you can wait till a weekend. I'll bring my own grinder, sawzall and tools too

How's the back half of the body? Much damage?

Thanks,
Nate

*sharpie1972* · 03-30-2011, 10:29 AM

What a deal! Mark always has great parts, and these are priced right! Sharpie

Livrat · 03-30-2011, 11:00 AM

Quote:

Originally Posted by Classic Bowties

Hi Mark, I am in for that pictured mid short seat w/brackets, can I at least buy the hold downs if they were present? Would also like to purchase a few other pieces off of this burb, will give you a ring in the morn. Mel

Mel, The seat is yours.. only one hold down was present.

Livrat · 03-30-2011, 11:02 AM

Quote:

Originally Posted by dave666693

are the rear Burb seats the same as a Blazer rear seat?

Dave, in a three seated burb both rear seats physically are the same as a Blazer, the middle row one has different front brackets, the rear one is identical.

Livrat · 03-30-2011, 11:10 AM

Quote:

Originally Posted by dubds10

Man I'll take it all for my project if you can wait till a weekend. I'll bring my own grinder, sawzall and tools too

How's the back half of the body? Much damage?

Thanks,
Nate

Nate,
the lower rear quarters are "typical" with rust, Ideally I would like someone to come by, run a sawzall across the roof and down just behind the 3rd door, then haul it all off.. I will take some pictures for you.. This sunday is the only weekend day I have available.. I plan the first of next week for my guy cut it and haul it off. I will take some pics of the quarter today and post them this eve for you..

jorgensensc · 03-30-2011, 11:35 AM

I know you said no shipping, but can I beg you to ship the clips that old the upper trim on the rear hatch. They don't repro them and I've had the trim off my burb since I got it because I cant get my hands on any. They are different than all the other trim clips. Just the upper trim clips only on the rear hatch is all I need. They can be put in a padded envelope and I will pay you for your time and shipping. Please let me know.
Shawn
Posted via Mobile Device

dave666693 · 03-30-2011, 12:34 PM

Quote:

Originally Posted by Livrat

Dave, in a three seated burb both rear seats physically are the same as a Blazer, the middle row one has different front brackets, the rear one is identical.

If they are still available, I will take one for my Blazer project.

dubds10 · 03-30-2011, 01:22 PM

Quote:

Originally Posted by Livrat

Nate,
the lower rear quarters are "typical" with rust, Ideally I would like someone to come by, run a sawzall across the roof and down just behind the 3rd door, then haul it all off.. I will take some pictures for you.. This sunday is the only weekend day I have available.. I plan the first of next week for my guy cut it and haul it off. I will take some pics of the quarter today and post them this eve for you..

Do you need to keep the back half of the frame? I know you said you have something to lift the body off, so either way, the body or the entire backhalf and roll it on my trailer. I can make it down on the weekend and haul it all away, but I'd be going down there very early 6am or I wouldn't be down to around 6pm.

I'll take the entire back half though, clam shell, inside panels, whatever's there. If the seats aren't all gone etc etc.

Thanks,
Nate

budnikguy · 03-30-2011, 02:56 PM

location location location....amazing gesture! Wish I was in the "right" location

dubds10 · 03-30-2011, 09:23 PM

Mark, I can come down Fri, Sat or Sun. Just let me know which day works best for you and I'll be there first thing in the morning if that's possible. And I'll take everything that's available, beside that seat that Mel wants of course..since he beat me to it lol

Just PM your address and when a good time to come is.

Thanks,
Nate

Livrat · 03-30-2011, 09:48 PM

Quote:

Originally Posted by jorgensensc

I know you said no shipping, but can I beg you to ship the clips that old the upper trim on the rear hatch. They don't repro them and I've had the trim off my burb since I got it because I cant get my hands on any. They are different than all the other trim clips. Just the upper trim clips only on the rear hatch is all I need. They can be put in a padded envelope and I will pay you for your time and shipping. Please let me know.
Shawn
Posted via Mobile Device

PM sent...

Livrat · 03-30-2011, 09:49 PM

Quote:

Originally Posted by dave666693

If they are still available, I will take one for my Blazer project.

Dave, Only the mid seat was avail and Mel grabbed it quick.. I do have another burb coming that I believe also has seats.. I will keep you posted.

Big Fenders · 03-30-2011, 10:05 PM

I'm interested in the hold-up arms for the clam shell door....I'd be glad to pay shipping.
Thanks
Bob

Livrat · 03-30-2011, 10:29 PM

Quote:

Originally Posted by dubds10

Mark, I can come down Fri, Sat or Sun. Just let me know which day works best for you and I'll be there first thing in the morning if that's possible. And I'll take everything that's available, beside that seat that Mel wants of course..since he beat me to it lol

Just PM your address and when a good time to come is.

Thanks,
Nate

Nate, Friday would be ideal..

Livrat · 03-30-2011, 10:30 PM

Quote:

Originally Posted by Big Fenders

I'm interested in the hold-up arms for the clam shell door....I'd be glad to pay shipping.
Thanks
Bob

Bob,
Everything had been spoken for (pending pickup)

dave666693 · 03-31-2011, 06:23 AM

Quote:

Originally Posted by Livrat

Dave, Only the mid seat was avail and Mel grabbed it quick.. I do have another burb coming that I believe also has seats.. I will keep you posted.

Thanks Mark!

Heavy Evy · 03-31-2011, 08:55 PM

any chance you have some decent burb carpet or rubber mat?

Livrat · 03-31-2011, 11:37 PM

Quote:

Originally Posted by Heavy Evy

any chance you have some decent burb carpet or rubber mat?

There was a rubber mat in this one but it was toast.. sorry no carpets or other mats..

themb2g · 04-02-2011, 10:48 PM

Quote:

Originally Posted by Livrat

Dave, Only the mid seat was avail and Mel grabbed it quick.. I do have another burb coming that I believe also has seats.. I will keep you posted.

Mark,

If you get another burb in, can you pm me on seats too? i am looking for a rear one as well for my blazer. Thanks.

Livrat · 04-03-2011, 12:02 AM

Sure, I will keep you in mind and let you know if another one comes in..

03-29-2011, 10:37 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Free burb stuff Just drug another burb crewcab donor in and I do not need anything behind the rear door.. so its all free... soft ray quarter glass, upper hatch with some minor pinholes,(not rust showing on the outer skin) lower gate with key, big dent but not rusted out, center seat (rear ones gone), tail lite patch panels etc. The only catch is.. you pull/cut/sawzall etc and.. you haul.. sorry no shipping on any of this.. Did I mention its free??? Attached Images

03-29-2011, 10:38 PM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Free burb stuff more pics Attached Images

03-29-2011, 11:03 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Free burb stuff Nice gesture!!! Wish i was closer. Looks like interior panels and retainers even. Lots of seat belts, lots of good stuff. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-30-2011, 02:07 AM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,755	Re: Free burb stuff Hi Mark, I am in for that pictured mid short seat w/brackets, can I at least buy the hold downs if they were present? Would also like to purchase a few other pieces off of this burb, will give you a ring in the morn. Mel

03-30-2011, 07:21 AM	#5
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Free burb stuff are the rear Burb seats the same as a Blazer rear seat? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

03-30-2011, 10:06 AM	#6
dubds10 Stalker Nate Join Date: Dec 2010 Location: Langley, BC, Canada Posts: 1,556	Re: Free burb stuff Man I'll take it all for my project if you can wait till a weekend. I'll bring my own grinder, sawzall and tools too How's the back half of the body? Much damage? Thanks, Nate __________________ 1957 GMC SWB stepper modified summer time driver 1963 Chevy Fire Dept. Command Center Van 2 ton - future food vending truck project 1965 Chevy P10 Ice Cream Truck project Instagram - TheDonutDiner FaceBook - @UscreamIscream

03-30-2011, 10:29 AM	#7
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Free burb stuff What a deal! Mark always has great parts, and these are priced right! Sharpie

03-30-2011, 11:35 AM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Free burb stuff I know you said no shipping, but can I beg you to ship the clips that old the upper trim on the rear hatch. They don't repro them and I've had the trim off my burb since I got it because I cant get my hands on any. They are different than all the other trim clips. Just the upper trim clips only on the rear hatch is all I need. They can be put in a padded envelope and I will pay you for your time and shipping. Please let me know. Shawn Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-30-2011, 02:56 PM	#14
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Free burb stuff location location location....amazing gesture! Wish I was in the "right" location

03-30-2011, 09:23 PM	#15
dubds10 Stalker Nate Join Date: Dec 2010 Location: Langley, BC, Canada Posts: 1,556	Re: Free burb stuff Mark, I can come down Fri, Sat or Sun. Just let me know which day works best for you and I'll be there first thing in the morning if that's possible. And I'll take everything that's available, beside that seat that Mel wants of course..since he beat me to it lol Just PM your address and when a good time to come is. Thanks, Nate __________________ 1957 GMC SWB stepper modified summer time driver 1963 Chevy Fire Dept. Command Center Van 2 ton - future food vending truck project 1965 Chevy P10 Ice Cream Truck project Instagram - TheDonutDiner FaceBook - @UscreamIscream

03-30-2011, 10:05 PM	#18
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Free burb stuff I'm interested in the hold-up arms for the clam shell door....I'd be glad to pay shipping. Thanks Bob

03-31-2011, 08:55 PM	#22
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Free burb stuff any chance you have some decent burb carpet or rubber mat? __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

04-03-2011, 12:02 AM	#25
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Free burb stuff Sure, I will keep you in mind and let you know if another one comes in..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.