Throttle cable or rod? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Balls McGee · 03-23-2003, 07:57 PM

Hey folks,

I'm curious what people are using for their throttle hookup from the lever at the firewall to the carb?

I have a mid-70s 350 in my '65 C10 with a Holley 4bbl and at the moment am using a fabricated rod to control the throttle but am curious if anyone is using a cable.

TIA

hugh e banks · 03-23-2003, 08:48 PM

i am useing a cable i took it of of a 74. brackets and floor pedal i just redrilled the holes for the firewall mount and cut a square hole for the cables to go throught and its dune. took about a hours time .

if everything seems undercontrol your just not going fast enough

Balls McGee · 03-23-2003, 09:20 PM

Thanks, you wouldn't happen to have any pics of your setup would you?

BG62 · 03-24-2003, 03:17 AM

I installed a 400 small block in my 62 GMC,
and had to put in a cable set up for carb.
I like the feel much better.

Balls McGee · 03-24-2003, 06:29 AM

BG62, did you keep the stock level that controls the cable (at the firewall)?

I want to go cable too but am trying to get a feel for how everyone has theirs set up.

Thanks

BG62 · 03-24-2003, 10:35 PM

I was able to use the stock set up, peddle, linkage ect..
I took a small straight round piece of metal made a small opening ring on the top end of the piece.
welded it on the top of the stock linkage that's attached on the fire wall. I then had to drill a hole in the fire wall. Ran the cable into hole in firewall,attached it to the piece I welded on through the ring, crimped the end of the cable at ring.then just adusted.
I hope this helps im bad at explaining with written words.
I'll try to get some picture's

03-23-2003, 07:57 PM	#1
Balls McGee d-oh! Join Date: Jan 2003 Location: Eastern Canada eh? Posts: 321	Throttle cable or rod? Hey folks, I'm curious what people are using for their throttle hookup from the lever at the firewall to the carb? I have a mid-70s 350 in my '65 C10 with a Holley 4bbl and at the moment am using a fabricated rod to control the throttle but am curious if anyone is using a cable. TIA __________________ Sean 1965 Chevy C10 Fleetside \| 350 4bbl \| duals w/headers & Flo-Pros \| 2004R with B&M 4sp shifter \| 3.73 12-bolt Last edited by Balls McGee; 03-23-2003 at 08:03 PM.

03-23-2003, 08:48 PM	#2
hugh e banks Registered User Join Date: Jan 2003 Location: washington state Posts: 11	i am useing a cable i took it of of a 74. brackets and floor pedal i just redrilled the holes for the firewall mount and cut a square hole for the cables to go throught and its dune. took about a hours time . if everything seems undercontrol your just not going fast enough __________________ 11 second pickup

03-23-2003, 09:20 PM	#3
Balls McGee d-oh! Join Date: Jan 2003 Location: Eastern Canada eh? Posts: 321	Thanks, you wouldn't happen to have any pics of your setup would you? __________________ Sean 1965 Chevy C10 Fleetside \| 350 4bbl \| duals w/headers & Flo-Pros \| 2004R with B&M 4sp shifter \| 3.73 12-bolt

03-24-2003, 06:29 AM	#5
Balls McGee d-oh! Join Date: Jan 2003 Location: Eastern Canada eh? Posts: 321	BG62, did you keep the stock level that controls the cable (at the firewall)? I want to go cable too but am trying to get a feel for how everyone has theirs set up. Thanks __________________ Sean 1965 Chevy C10 Fleetside \| 350 4bbl \| duals w/headers & Flo-Pros \| 2004R with B&M 4sp shifter \| 3.73 12-bolt

03-24-2003, 03:17 AM	#4
BG62 Registered User Join Date: Jan 2003 Location: Los Angeles, CA Posts: 23	I installed a 400 small block in my 62 GMC, and had to put in a cable set up for carb. I like the feel much better.

03-24-2003, 10:35 PM	#6
BG62 Registered User Join Date: Jan 2003 Location: Los Angeles, CA Posts: 23	I was able to use the stock set up, peddle, linkage ect.. I took a small straight round piece of metal made a small opening ring on the top end of the piece. welded it on the top of the stock linkage that's attached on the fire wall. I then had to drill a hole in the fire wall. Ran the cable into hole in firewall,attached it to the piece I welded on through the ring, crimped the end of the cable at ring.then just adusted. I hope this helps im bad at explaining with written words. I'll try to get some picture's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.