Torque on diff and tranfercase input - output shafts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

freeride4011 · 04-08-2011, 02:28 PM

Guys,

I have a 1968 GMC 4X4.
I put new seals in the input shafts of the front and rear diffs and I'm not sure of the torque valve to set the pre-load of the bearings.
Also I had to change the seal on the front out put shaft of the transfer case.
Need the torque value for all to reinstall the yokes.
Any advice on the value or where I can find it would be greatly appreciated.

Thanks in advance.

1malo68 · 04-20-2011, 04:02 AM

This might help
http://www.camaros.net/forums/showthread.php?t=82914

freeride4011 · 04-30-2011, 07:17 AM

Thanks for the information.

04-08-2011, 02:28 PM	#1
freeride4011 Registered User Join Date: Apr 2008 Location: Alberta, Canada Posts: 21	Torque on diff and tranfercase input - output shafts. Guys, I have a 1968 GMC 4X4. I put new seals in the input shafts of the front and rear diffs and I'm not sure of the torque valve to set the pre-load of the bearings. Also I had to change the seal on the front out put shaft of the transfer case. Need the torque value for all to reinstall the yokes. Any advice on the value or where I can find it would be greatly appreciated. Thanks in advance.

04-20-2011, 04:02 AM	#2
1malo68 Registered User Join Date: Aug 2010 Location: Lost Wages, NV Posts: 201	Re: Torque on diff and tranfercase input - output shafts. This might help http://www.camaros.net/forums/showthread.php?t=82914 __________________ 1968 K10/30 *Frame Off Project "Overkill"* My 5 year, $30,000.00 toy

04-30-2011, 07:17 AM	#3
freeride4011 Registered User Join Date: Apr 2008 Location: Alberta, Canada Posts: 21	Re: Torque on diff and tranfercase input - output shafts. Thanks for the information.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.