64-66 help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 04-24-2011, 10:50 AM

yesterday i ended up with a 64-66 swb fleetside truck, it's in pieces and the owner can't find the papers (it was a lein sale truck). it appears the only sheetmetal that is useable is the cab, inner fenders and rad support, everything else looks like scrap. it has a locked up V8, 3 speed trans and someone cleaned and painted the frame. thats about all i know at this point. i have dealt with 67-72 trucks for many years and know the different years by just looking at them but all i can tell about this thing is it's a 64-66. is there a way to tell exactly what year it is without a title? i know you 60-66 guru's will think i'm a dumba$$ (you're probably right too

) but i don't know how to tell which year it is. if i can figure out what it is, i'll post some stuff in the "for sale" section.

**Clyde65** · 04-24-2011, 11:34 AM

have you looked for the VIN plate? drivers door frame top.

*lakeroadster* · 04-24-2011, 12:57 PM

Are there Chevy C10 emblems on the dog house? They were different every year.

**jerry moss** · 04-24-2011, 09:14 PM

emblems were on the fenders but missing now--if the fenders are correct for the truck.
the VIN is 4C144 H 109035 so since it's not a 61 and the other numbers are all 4s, i assume it's a 64. thanks for your help.

**Chevy Fleetside** · 04-24-2011, 10:39 PM

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=9 According to LMC's chart, it is a 64

martijn · 04-25-2011, 05:11 AM

Interesting.. my VIN is pretty much the same, and also produced at plant 'H', on the LMC chart there's no H, but on the next page under GMC VIN's there H=Oakland. Can I assume my Chevy is from there too? And why would't it be listed on the first place? Maybe a limited production series?

chevyrestoguy · 04-25-2011, 10:09 AM

Jerry-
If you decide to part it out, you'll do OK on it. I might be interested in some parts as well. Is it a 6-lug or an 8-lug truck? I'm looking for some particular pieces for my '64, and maybe your truck has them.

Plus, what we consider as scrap on the West Coast could be quite valuable to some of our East Coast brothers.

Leadfoot Lambert · 04-25-2011, 07:21 PM

Quote:

Originally Posted by chevyrestoguy

Jerry-

Plus, what we consider as scrap on the West Coast could be quite valuable to some of our East Coast brothers.

Yeah like me! How is the right front fender? Is it a short fleeetside? if yes, How are the bed sides?

**jerry moss** · 04-26-2011, 12:00 AM

it's a 6 lug and the bedsides are junk. i'll post it in the parts section so i don't break board rules.

Slow Build · 04-26-2011, 12:21 AM

Quote:

Originally Posted by martijn

my VIN is pretty much the same, and also produced at plant 'H', on the LMC chart there's no H, but on the next page under GMC VIN's there H=Oakland.

I have heard that the 64's with 'H' were actually made in Fremont even though the charts say it was Oakland. Mine is an 'H' also.

04-24-2011, 10:50 AM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,940	64-66 help yesterday i ended up with a 64-66 swb fleetside truck, it's in pieces and the owner can't find the papers (it was a lein sale truck). it appears the only sheetmetal that is useable is the cab, inner fenders and rad support, everything else looks like scrap. it has a locked up V8, 3 speed trans and someone cleaned and painted the frame. thats about all i know at this point. i have dealt with 67-72 trucks for many years and know the different years by just looking at them but all i can tell about this thing is it's a 64-66. is there a way to tell exactly what year it is without a title? i know you 60-66 guru's will think i'm a dumba$$ (you're probably right too) but i don't know how to tell which year it is. if i can figure out what it is, i'll post some stuff in the "for sale" section. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-24-2011, 11:34 AM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 64-66 help have you looked for the VIN plate? drivers door frame top. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-24-2011, 12:57 PM	#3
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: 64-66 help Are there Chevy C10 emblems on the dog house? They were different every year. Attached Images Last edited by lakeroadster; 04-24-2011 at 01:13 PM.

04-24-2011, 09:14 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,940	Re: 64-66 help emblems were on the fenders but missing now--if the fenders are correct for the truck. the VIN is 4C144 H 109035 so since it's not a 61 and the other numbers are all 4s, i assume it's a 64. thanks for your help. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-24-2011, 10:39 PM	#5
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: 64-66 help http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=9 According to LMC's chart, it is a 64 __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

04-25-2011, 05:11 AM	#6
martijn Registered User Join Date: Apr 2011 Location: Bendstrup, Denmark Posts: 4	Re: 64-66 help Interesting.. my VIN is pretty much the same, and also produced at plant 'H', on the LMC chart there's no H, but on the next page under GMC VIN's there H=Oakland. Can I assume my Chevy is from there too? And why would't it be listed on the first place? Maybe a limited production series? __________________ Martijn http://chevy64.dk

04-25-2011, 10:09 AM	#7
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: 64-66 help Jerry- If you decide to part it out, you'll do OK on it. I might be interested in some parts as well. Is it a 6-lug or an 8-lug truck? I'm looking for some particular pieces for my '64, and maybe your truck has them. Plus, what we consider as scrap on the West Coast could be quite valuable to some of our East Coast brothers. __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 Last edited by chevyrestoguy; 04-25-2011 at 10:50 AM.

04-26-2011, 12:00 AM	#9
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,940	Re: 64-66 help it's a 6 lug and the bedsides are junk. i'll post it in the parts section so i don't break board rules. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.