Air bags for stock height trucks

[taank]

68 c10 street/strip truck. I want to bag the rear
Posted via Mobile Device

[hotrodhomi]

Originally Posted by taank

68 c10 street/strip truck. I want to bag the rear
Posted via Mobile Device

I don't see a question.

[taank]

Is there a kit available? What is the best to get? Schrader valve and airlines is all I need to fill. I found 1 for 300 but it's for lowered
Posted via Mobile Device

[hotrodhomi]

$300 is too much for 2 bags plus fitting and 1/4" air line.
Rough cost should be less than that

bags ~ $70 ea = $140
fittings $50
Schrader valves = $10
1/4" air line= $10
total= $210

[taank]

This is the kit it says contact for stock height

http://www.airbagit.com/product-p/fbx-r-che-02.htm
Posted via Mobile Device

[Shane]

"airbagit" .... there's the first problem.

[hotrodhomi]

Originally Posted by taank

This is the kit it says contact for stock height

http://www.airbagit.com/product-p/fbx-r-che-02.htm
Posted via Mobile Device

Don't buy from these guys. Read some reviews about their products and service.

If you don't want to lower your truck with bags you will need to build some brackets that raise the bag.

[jimmydean]

I used a 2" cup on the underside of my bag on the trailing arm to keep my axle from hitting the frame. I didn't want to notch the frame and it worked very well.

<edit> That's not a bad looking kit, but like others said, I wouldn't shop there. You can use the cups made by ***************** on the rear like I did for a lot less money.

[taank]

is there another place that would be better for a kit?

[andrewmp6]

Look under the suspension market all of those vendors can take care of you with good parts just pm a few.

[taank]

Bump
Posted via Mobile Device

[taank]

Frame is being boxed as well
Posted via Mobile Device