48 GMC Burb 96 vett LT 1 swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

48 GMC BURB · 05-14-2011, 06:12 PM

Looking at putting 96 vett drivetrain in my 48 , it has a 350 crate & 700r4 TX now. How hard of a swap is that ? I've been wrenching on toys for a while but not made the leap to EFI. I look forward to all input.

**youngrodder** · 05-14-2011, 08:52 PM

I put a 95 Vette Lt1 into my 48 truck. I went with Howell Engine development for the wiring harness and computer flash. I also used Street and performance for the engine brackets. Overall once you have a basic understanding it is not to bad, bit then again I choose to spend the money on an aftermarket harness to make it easier.

Let me know if you have any questions.

Good luck
Marc

48 GMC BURB · 05-14-2011, 10:55 PM

TKS, How was the fit of the trans & are the motor mounts in the same location ? Do you have pix of your build ?

fredscarryall · 05-14-2011, 11:38 PM

looks really cool from the profile picture. would diffently like to see some more pictures

**youngrodder** · 05-15-2011, 11:26 PM

Quote:

Originally Posted by 48 GMC BURB

TKS, How was the fit of the trans & are the motor mounts in the same location ? Do you have pix of your build ?

My truck uses a modified G-body frame. It had a 305 with a turbo 350 trans, so there was not much different that I needed to do besides modify the trans mount slightly.

My truck is a 12 year endeavor. I have a Photobucket page with over 200 -pics. The login info is below my profile picture.

Marc

05-14-2011, 06:12 PM	#1
48 GMC BURB Registered User Join Date: Feb 2011 Location: Annapolis MD Posts: 183	48 GMC Burb 96 vett LT 1 swap Looking at putting 96 vett drivetrain in my 48 , it has a 350 crate & 700r4 TX now. How hard of a swap is that ? I've been wrenching on toys for a while but not made the leap to EFI. I look forward to all input.

05-14-2011, 08:52 PM	#2
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 48 GMC Burb 96 vett LT 1 swap I put a 95 Vette Lt1 into my 48 truck. I went with Howell Engine development for the wiring harness and computer flash. I also used Street and performance for the engine brackets. Overall once you have a basic understanding it is not to bad, bit then again I choose to spend the money on an aftermarket harness to make it easier. Let me know if you have any questions. Good luck Marc Attached Images __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

05-14-2011, 10:55 PM	#3
48 GMC BURB Registered User Join Date: Feb 2011 Location: Annapolis MD Posts: 183	Re: 48 GMC Burb 96 vett LT 1 swap TKS, How was the fit of the trans & are the motor mounts in the same location ? Do you have pix of your build ? __________________ 48 GMC Burb 51 Chevy AD 3100/C 4 byShannon 74 Chevy P 10 48 Double Duty 04 SS Burb 01 Springer HD

05-14-2011, 11:38 PM	#4
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: 48 GMC Burb 96 vett LT 1 swap looks really cool from the profile picture. would diffently like to see some more pictures



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.