issues with correct motor mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SRVBLUES64 · 05-15-2011, 02:25 PM

I have no idea even after reading the forum on 66 mounts for a 350 what to do I have posted a few pics on what i have to see if someone can tell me if my 350 motor and trans will fit on my 66 c10 Please take a look and let me know Thanks again for the help Jeff

**Captainfab** · 05-16-2011, 12:50 AM

Yep, no problem. You'll just need the motor mounts themselves, and also a trans mount. Bolt the engine and trans together, and set them in as one unit. Once you get the engine located on the motor mount stands, and the bolts started into the mounts, slide the trans crossmember in place. Then once the trans mount is secured to the crossmember, tighten the motor mount thru bolts. Then you can locate and drill the new holes for the trans crossmember.

The motor mounts were used from '63-'72 on the small blocks, and the trans mount from the same year span would work also.

Scot_Douglas · 05-16-2011, 08:15 AM

Also, when you buy motor mounts, stay away from the $5 models they sell on Summit. I have $10 of Chinese junk sitting on my shelf - junk - because the baseplate is about half as thick as OEM.

Real_McCoy · 05-19-2011, 11:03 AM

Quote:

Originally Posted by Scot_Douglas

Also, when you buy motor mounts, stay away from the $5 models they sell on Summit. I have $10 of Chinese junk sitting on my shelf - junk - because the baseplate is about half as thick as OEM.

Glad I read this. I was looking at those yesterday.

63 Chevy Stepside · 05-23-2011, 07:21 PM

I had the same question about my 63 C10 and found help in this post. Different years, but similar set ups.

http://67-72chevytrucks.com/vboard/s...d.php?t=367487

05-15-2011, 02:25 PM	#1
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	issues with correct motor mounts I have no idea even after reading the forum on 66 mounts for a 350 what to do I have posted a few pics on what i have to see if someone can tell me if my 350 motor and trans will fit on my 66 c10 Please take a look and let me know Thanks again for the help Jeff Attached Images

05-16-2011, 12:50 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: issues with correct motor mounts Yep, no problem. You'll just need the motor mounts themselves, and also a trans mount. Bolt the engine and trans together, and set them in as one unit. Once you get the engine located on the motor mount stands, and the bolts started into the mounts, slide the trans crossmember in place. Then once the trans mount is secured to the crossmember, tighten the motor mount thru bolts. Then you can locate and drill the new holes for the trans crossmember. The motor mounts were used from '63-'72 on the small blocks, and the trans mount from the same year span would work also. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-16-2011, 08:15 AM	#3
Scot_Douglas Registered User Join Date: Oct 2009 Location: Howell, MI Posts: 403	Re: issues with correct motor mounts Also, when you buy motor mounts, stay away from the $5 models they sell on Summit. I have $10 of Chinese junk sitting on my shelf - junk - because the baseplate is about half as thick as OEM. __________________ 1964 C10 - sold to chris1044 1966 C10 Build 'Fread

05-23-2011, 07:21 PM	#5
63 Chevy Stepside Registered User Join Date: May 2011 Location: Omaha, NE Posts: 76	Re: issues with correct motor mounts I had the same question about my 63 C10 and found help in this post. Different years, but similar set ups. http://67-72chevytrucks.com/vboard/s...d.php?t=367487



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.