The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-09-2011, 01:28 PM   #1
JasonWynn88
Registered User
 
Join Date: Jul 2011
Location: Pooler, Georgia
Posts: 20
Chevy 230 6 to 350 swap

Hey this is my first thread on this site. My question is what all do i have to do and what do i need for this swap. I have a 65 c10 shortbed fleetside with the 3 speed manual trans and the 230. I have the new mounts but what else will i need to do will the 10 1/2 clutch work on the 350? I heard everything should bolt up and is a pretty easy install also , will the 6 cylinder starter work on the v8 because it bolts through the bellhousing on the six. Just wanted to know how to do this swap as far as every thing i need and i hope the 3 speed will hold up to the 350. Thanks
JasonWynn88 is offline   Reply With Quote
Old 07-09-2011, 09:46 PM   #2
JohnnyBoy350
Registered User
 
Join Date: May 2010
Location: Roseburg, OR
Posts: 31
Re: Chevy 230 6 to 350 swap

You might have to use the 6 banger flywheel, count the teeth on the ring gear, needs to be the same as the 6 cyl one to use the 6 cyl starter. On my 250 it had the same size flywheel as the 350 so I was good to go(I used a 350 flywheel on my 454).

-John
__________________
If it don't go, chrome it!
JohnnyBoy350 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com