NY Blazer rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ORANGBLAZ · 07-27-2011, 08:09 PM

Have six 15x6 6 lug for four wheel drive. 3 have 4" back spacing (original Blazer?) and the other 3 have 3 1/2". Some rust but no serious pitting. Should clean up nice!
$100 plus shipping

Name: 002.jpg
Views: 450
Size: 66.4 KB

OLD K5 · 07-28-2011, 10:19 PM

I'm interested depending on how much shipping would be to Ventura CA,93003. Also do those rims fit the disk brake Blazers or are they for the drum brake models? I know it has to do with the ofset.

ORANGBLAZ · 07-28-2011, 10:27 PM

All of the Blazers and Jimmys I've parted out were '71 and '72s, so they all were equipped with disc brakes. I would imagine that any clearance issues involved the caliper hitting the inside of the rim.

ORANGBLAZ · 07-28-2011, 10:30 PM

I will get a quote tomorrow, but would guess around $20 each.

ORANGBLAZ · 07-28-2011, 10:49 PM

Went on USPS.com, looking like $25 each. Guesstimated 18"x18"x10" and 20 lbs.

cooldudecoco · 07-29-2011, 09:47 PM

i need just one for a spare ....

cucvzuz · 07-29-2011, 10:13 PM

If you need just 1 for a spare it may not match but I have this>>>>>

http://www.67-72chevytrucks.com/vboa...d.php?t=475016

ORANGBLAZ · 07-29-2011, 10:22 PM

Quote:

Originally Posted by cooldudecoco

i need just one for a spare ....

How about $45 shipped?

cooldudecoco · 07-29-2011, 10:24 PM

my mistake i need a 15 6 lug by 8 inch rim

OLD K5 · 07-30-2011, 07:04 PM

I'm going to pass, but thanks for the offer!

Tbruz · 08-11-2011, 10:44 PM

I'm interested, if they are still available.
Just need to verify my backspacing.
Can you advise shipping costs to 03087?
Thanks
Tbruz

ORANGBLAZ · 08-12-2011, 10:56 AM

Quote:

Originally Posted by Tbruz

I'm interested, if they are still available.
Just need to verify my backspacing.
Can you advise shipping costs to 03087?
Thanks
Tbruz

Looking like around $15 each via US Mail.

(better hurry while they're still in business..!)

Tbruz · 08-12-2011, 09:45 PM

I'll verify back space in the am and confirm.
Tbruz

Tbruz · 08-13-2011, 12:00 PM

My spare measures 3.5" backspace as measured from the mounting pad to the back outer edge of the rim.
Now i'm not sure if my spare is correct or not.
I'll have to mount the wheel on the truck and look for any inerference.

Can anyone weigh in with what the correct backspace for a 1972 Blazer w/ 4WD should be?
Thanks,
Tony

ORANGBLAZ · 08-13-2011, 12:42 PM

Went back and re-measured. Three are 3.5", not 4.5". Other three are 4", not 4.125", seems I measured from the recess around the lug holes rather the highest point that contacts the drum or rotor.

(measure twice, speak once...DOH!)

Tbruz · 08-13-2011, 12:50 PM

Just sent you a PM.
Tony

ORANGBLAZ · 09-17-2011, 11:15 AM

The three rims w/ 4" backspace still available. $15 each

47thriftmaster · 09-19-2011, 07:22 PM

Could you get close up pics of the 3 with 4" back spacing, front, back and inside of valve stem hole? Is the any pitting on the faces? I had 5 wheels, but after blasting them I ended up with only 3 good ones. One had a large piece come out the back and I didn't trust it, the other was rusted out at the valve stem. Also price with shipping. Thanks

ORANGBLAZ · 09-19-2011, 10:16 PM

Quote:

Originally Posted by 47thriftmaster

Could you get close up pics of the 3 with 4" back spacing, front, back and inside of valve stem hole? Is the any pitting on the faces? I had 5 wheels, but after blasting them I ended up with only 3 good ones. One had a large piece come out the back and I didn't trust it, the other was rusted out at the valve stem. Also price with shipping. Thanks

I will post more pics tomorrow.

ORANGBLAZ · 09-20-2011, 07:36 PM

These have surface rust with minimal pitting. Holes for valve stems look great. Have a few dents that may need to be taken out, but overall not too bad.
Shipped some to NH recently and they were $17 ea. via usps, so figure $20 or so to you. How's $100 shipped?

Name: 005.jpg
Views: 168
Size: 43.6 KB

ORANGBLAZ · 09-20-2011, 07:38 PM

More pics.

Name: 010.jpg
Views: 161
Size: 48.4 KB

47thriftmaster · 09-21-2011, 07:52 PM

Thank you, since they are dented and pitted I'll have to pass. I need some decent wheels to clean up and coat, to match my others. I don't want any pitting in the face.

07-27-2011, 08:09 PM	#1
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Blazer rims Have six 15x6 6 lug for four wheel drive. 3 have 4" back spacing (original Blazer?) and the other 3 have 3 1/2". Some rust but no serious pitting. Should clean up nice! $100 plus shipping Last edited by ORANGBLAZ; 09-18-2011 at 11:55 AM.

07-28-2011, 10:19 PM	#2
OLD K5 Registered User Join Date: Nov 2009 Location: Ventura, CA Posts: 98	Re: Blazer rims I'm interested depending on how much shipping would be to Ventura CA,93003. Also do those rims fit the disk brake Blazers or are they for the drum brake models? I know it has to do with the ofset.

07-28-2011, 10:27 PM	#3
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims All of the Blazers and Jimmys I've parted out were '71 and '72s, so they all were equipped with disc brakes. I would imagine that any clearance issues involved the caliper hitting the inside of the rim.

07-28-2011, 10:30 PM	#4
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims I will get a quote tomorrow, but would guess around $20 each.

07-28-2011, 10:49 PM	#5
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims Went on USPS.com, looking like $25 each. Guesstimated 18"x18"x10" and 20 lbs.

07-29-2011, 09:47 PM	#6
cooldudecoco Registered User Join Date: Mar 2008 Location: baltimore Posts: 136	Re: Blazer rims i need just one for a spare ....

07-29-2011, 10:13 PM	#7
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: Blazer rims If you need just 1 for a spare it may not match but I have this>>>>> http://www.67-72chevytrucks.com/vboa...d.php?t=475016

07-29-2011, 10:24 PM	#9
cooldudecoco Registered User Join Date: Mar 2008 Location: baltimore Posts: 136	Re: Blazer rims my mistake i need a 15 6 lug by 8 inch rim

07-30-2011, 07:04 PM	#10
OLD K5 Registered User Join Date: Nov 2009 Location: Ventura, CA Posts: 98	Re: Blazer rims I'm going to pass, but thanks for the offer!

08-11-2011, 10:44 PM	#11
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer rims I'm interested, if they are still available. Just need to verify my backspacing. Can you advise shipping costs to 03087? Thanks Tbruz

08-12-2011, 09:45 PM	#13
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer rims I'll verify back space in the am and confirm. Tbruz

08-13-2011, 12:00 PM	#14
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer rims My spare measures 3.5" backspace as measured from the mounting pad to the back outer edge of the rim. Now i'm not sure if my spare is correct or not. I'll have to mount the wheel on the truck and look for any inerference. Can anyone weigh in with what the correct backspace for a 1972 Blazer w/ 4WD should be? Thanks, Tony

08-13-2011, 12:42 PM	#15
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims Went back and re-measured. Three are 3.5", not 4.5". Other three are 4", not 4.125", seems I measured from the recess around the lug holes rather the highest point that contacts the drum or rotor. (measure twice, speak once...DOH!)

08-13-2011, 12:50 PM	#16
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer rims Just sent you a PM. Tony

09-17-2011, 11:15 AM	#17
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims The three rims w/ 4" backspace still available. $15 each



Register or Log In To remove these advertisements.

09-19-2011, 07:22 PM	#18
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Blazer rims Could you get close up pics of the 3 with 4" back spacing, front, back and inside of valve stem hole? Is the any pitting on the faces? I had 5 wheels, but after blasting them I ended up with only 3 good ones. One had a large piece come out the back and I didn't trust it, the other was rusted out at the valve stem. Also price with shipping. Thanks

09-20-2011, 07:36 PM	#20
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims These have surface rust with minimal pitting. Holes for valve stems look great. Have a few dents that may need to be taken out, but overall not too bad. Shipped some to NH recently and they were $17 ea. via usps, so figure $20 or so to you. How's $100 shipped?

09-20-2011, 07:38 PM	#21
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Blazer rims More pics.

09-21-2011, 07:52 PM	#22
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Blazer rims Thank you, since they are dented and pitted I'll have to pass. I need some decent wheels to clean up and coat, to match my others. I don't want any pitting in the face.

Register or Log In To remove these advertisements.