The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-28-2011, 08:09 PM   #1
mweishaa
Registered User
 
Join Date: Jul 2011
Location: Gilbert, AZ
Posts: 33
Turn signal wiring on 64 GMC 1500

OK, so I got my new turn signals in, now it's time to wire them. The painters just cut the wires but there's a portion of the wiring running in within the hood. So I have the original light blue, dark blue, and violet wires.

I took the wiring diagram from the manual and "erased" everything I didn't need. Here's the pic:


I wired it up just as shown here. Here are my results:
1. I have no parking lights (but the rear lights do work in parking mode.

2. When I engage the left signal, BOTH signals blink bright (bottom bulb filaments).

3. When I engage the right signal, only the right one blinks, but dimmer (using the bottom filament).

In both cases, the turn signal indicator on the dash blinks.

I'm pretty stumped. I removed the light blue wire from the firewall, and got the exact same results. If I remove the dark blue wire, both blink for left, netiehr for right. The dash indicator still works for both. If I remove the violet wire (supposed to go to the light switch connector) then I get nothing.

Now the ONLY thing I didn't do per the diagram was have the violet wire connected at the left light and then to the right light. But they're connected together, more in a Y... i.e. the wire comes from the firewall to the middle of the hood, then does a Y to both lights.

OK wiring gurus, what's going on? It appears I have the original wiring, so I would expect it to all be intact.

I took the voltages at the engine side of the firewall of the 3 connectors. There were no wires running, so I was getting a good ground.
voltages are for the Top/Left/Right connector
Parking light on - 0/0/0
Left signal on - 0/12/12
Right signal on - var/0/var

var = varying voltage... so, blinking.

Per the diagram it should be Top (right signal), Left (left signal), Right (parking)

I think I'm going to have to dig into the parking light switch and do some wire tracing to the signal switch now.
mweishaa is offline   Reply With Quote
Old 07-29-2011, 09:38 PM   #2
scotts62
One day...
 
scotts62's Avatar
 
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
Re: Turn signal wiring on 64 GMC 1500

ttt
__________________
Scott

93 crew cab build
Project 62
scotts62 is offline   Reply With Quote
Old 09-21-2011, 11:35 PM   #3
chris86
Registered User
 
chris86's Avatar
 
Join Date: May 2010
Location: Yorba Linda Ca
Posts: 26
Re: Turn signal wiring on 64 GMC 1500

did you ever figure it out
i got the same problem
chris86 is offline   Reply With Quote
Old 09-22-2011, 09:33 AM   #4
mweishaa
Registered User
 
Join Date: Jul 2011
Location: Gilbert, AZ
Posts: 33
Re: Turn signal wiring on 64 GMC 1500

I haven't taken the time to go any further with it. I had some other things I needed to do on the truck, and it's just been too damn hot here. I'm kind of laying low until we get a break from our heat. (supposed to be 106 for the next week!)
mweishaa is offline   Reply With Quote
Old 09-22-2011, 10:23 AM   #5
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: Turn signal wiring on 64 GMC 1500

One thing you shouldnt forget is to use a ground strap from the hood to the body.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com