|
08-29-2001, 11:51 AM
|
#1 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
3:40 12 bolt axle
Anyone interested in a 1973-81 3:40 ratio 12 bolt axle ?
Or in 1976 disc brake 2wd complete front suspension assembly ? asking 50 bucks for axle or front assembly, no where to store them right now. ------------------ Randy, Lincoln-IL r72k5@hotmail.com Looking for an HEI 292/250ci dizzy Current fleet: -`77 Buick Electra boat car, 403ci/TH350, 8-track AM/FM, tilt-cruise, climate control, p/seats, p/w p/l, p/antenna, running it til I kill it -72 K-5 Blazer 4x4 chassis, to be converted to a 1968 4x2 street pickup -'76 GMC Sierra Classic, 350ci/TH350, 3.40 gears, - '68 C-30 dually dump, 292ci/4 speed, 7200lb Corp- 4:57 gears Hopeful to add to corral soon: -'68 Panel Delivery(Many thanks to Shanet)! 250/3 speed, 3:73 ratio '68's forever!!!! http://communities.msn.com/RandyR72K5 http://www2.state.il.us/state/facts/geograph.htm [This message has been edited by Fast68Chevy (edited 08-29-2001).] |
|
|
|
08-29-2001, 08:06 PM
|
#2 |
|
Oh,you can't buy that new
 
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
I was just getting ready to list my 6 Cyl. Hei on the 67-72 board where i sold the Other 2 I had for sale. The one i have now is the type with the seperate coil but it is there also with mounts.still has decent HEi wires in it with cap and holdown. $39. I 'll knock off $10 if you still have that 73-80 clock you had and want to trade it . lemme know before i throw it on the board. Do you have the ability to truck freight that rear or are you only looking for pickup?
all4trux@snip.net . DAVE
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone  73 Pinto, stock, w/CragarSS's-eww  LOTS of Cummins trucks. |
|
|
|
|
08-30-2001, 12:48 PM
|
#3 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
frieght is lots of $$$$, like over 200 bucks for this, plus building crate, etc.
I do have the clock if you want it. if you know what color wires run the clock, I can test it for you, let it run for a day and make sure it keeps correct time, etc. leme know, as I can use the dizzy, even if its not an in cap style, just as long as HEI  I E-mailed you. ------------------ Randy, Lincoln-IL r72k5@hotmail.com Looking for an HEI 292/250ci dizzy Current fleet: -`77 Buick Electra boat car, 403ci/TH350, 8-track AM/FM, tilt-cruise, climate control, p/seats, p/w p/l, p/antenna, running it til I kill it -72 K-5 Blazer 4x4 chassis, to be converted to a 1968 4x2 street pickup -'76 GMC Sierra Classic, 350ci/TH350, 3.40 gears, - '68 C-30 dually dump, 292ci/4 speed, 7200lb Corp- 4:57 gears Hopeful to add to corral soon: -'68 Panel Delivery(Many thanks to Shanet)! 250/3 speed, 3:73 ratio '68's forever!!!! http://communities.msn.com/RandyR72K5 http://www2.state.il.us/state/facts/geograph.htm [This message has been edited by Fast68Chevy (edited 08-30-2001).] |
|
|
|
|
08-30-2001, 02:04 PM
|
#4 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
crossy, does the dizzy have a 4- 5/8" long shaft, from the bottom of the base-to-engine block seat, to the end of the shaft ? And does it have 13 teeth on the driven gear?
|
|
|
|
|
08-30-2001, 03:20 PM
|
#5 |
|
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
sending a pic & info, DAVE
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
