GMC frame and Chevy frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cajun chevy · 08-13-2011, 11:04 PM

Is the 1972 gmc frame The same as the 1972 chevy frame? Thanks.

andrewmp6 · 08-15-2011, 03:19 AM

I think the gmc has leafs in the back or most i have seen where.

cajun chevy · 08-15-2011, 09:06 AM

Your right. gm has leafs.
wondering if frame dimensions and mounts are the same.

SCOTI · 08-15-2011, 06:26 PM

They could be built either way depending on if it was ordered. Regardless of the suspension type, the bodies, sheet-metal, & mounts are interchangeable.

funkytechmonkey · 08-17-2011, 01:02 AM

I changed from leaf to coilover on my 71 GMC and it was a 1/2" wider in the rear than other CHEVYs I measured. Dont know if it was just mine or if its all of them. Didnt have another GMC around to take a measurement on it.

08-13-2011, 11:04 PM	#1
cajun chevy Registered User Join Date: Jun 2009 Location: meteghan centre, nova scotia, canada Posts: 208	GMC frame and Chevy frame Is the 1972 gmc frame The same as the 1972 chevy frame? Thanks.

08-15-2011, 03:19 AM	#2
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: GMC frame and Chevy frame I think the gmc has leafs in the back or most i have seen where.

08-15-2011, 09:06 AM	#3
cajun chevy Registered User Join Date: Jun 2009 Location: meteghan centre, nova scotia, canada Posts: 208	Re: GMC frame and Chevy frame Your right. gm has leafs. wondering if frame dimensions and mounts are the same.

08-15-2011, 06:26 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: GMC frame and Chevy frame They could be built either way depending on if it was ordered. Regardless of the suspension type, the bodies, sheet-metal, & mounts are interchangeable. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-17-2011, 01:02 AM	#5
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: GMC frame and Chevy frame I changed from leaf to coilover on my 71 GMC and it was a 1/2" wider in the rear than other CHEVYs I measured. Dont know if it was just mine or if its all of them. Didnt have another GMC around to take a measurement on it. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.