CA Parting 67 C10 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 08-14-2011, 09:31 PM

Picked this up for a few parts for my build, everything else is up for sale.

Front fenders, hood are crap as there is a bunch of rust in them. Can cut patch panels out of the good parts?

-Hood Hinges-sold
-Rear trim and panels-sold
-Seats, all three, rear 2 look in good shape, front needs a new cover.- sold
-Fan shroud, didnt see any cracks, good DD. $20 picked up

-Air Cleaner top and bottom. Some pitting on the top $10 picked up

-Front bumper, DD, Has a small tweak in it. $60 picked up

-Core Support, rust under the battery, IMO can be fixed with a patch panel. $60 picked up

-Tail gate, Good shape, ding under key, No key, have cover for the latch stuff, didnt see any rust. $150 picked up

-hatch, good shape, didnt see any rust, window included $200 picked up

See anything else, ask me and Ill price it out. All prices are OBO.
Picture Album is here : http://pnkages.com/gallery/v/Parts/6...ban/?g2_page=1

**too much stuff** · 08-14-2011, 11:33 PM

Horn cap, any knobs, and any seatbelts? Price and condition. Thanks.

jays68yak · 08-15-2011, 12:03 AM

Quote:

Originally Posted by too much stuff

Horn cap, any knobs, and any seatbelts? Price and condition. Thanks.

Knobs off the dash? Let me get pictures of the horn cap and the belts. Are you looking for the complete set of belts for all 3 seats?

**too much stuff** · 08-15-2011, 08:45 AM

Original knobs for the dash and radio, and any 67 seat belts. Also, the horn button with the parts underneath. Thanks.

Heavy Evy · 08-15-2011, 01:23 PM

any decent carpet or rubber mat? what kind of shape is the chevrolet tailgate emblem in?
Posted via Mobile Device
Posted via Mobile Device

jays68yak · 08-15-2011, 04:06 PM

Quote:

Originally Posted by Heavy Evy

any decent carpet or rubber mat? what kind of shape is the chevrolet tailgate emblem in?
Posted via Mobile Device
Posted via Mobile Device

Pretty sure the rubber mats are trashed. The tailgate emblem is tweaked a bit.

**kev2809** · 08-15-2011, 06:05 PM

do you have a front passenger fender?

72ArizonaBurb · 08-15-2011, 06:30 PM

I need the internals out of the tailgate. Not the whole talegate just the push button mechanism and all the rods that connect to the latches. Would need them shipped to 37010. Thanks!

jays68yak · 08-15-2011, 10:37 PM

Quote:

Originally Posted by too much stuff

Original knobs for the dash and radio, and any 67 seat belts. Also, the horn button with the parts underneath. Thanks.

Seat belts. Turns out the rear seat didnt have any.

Ill just sell you the whole radio?

Crappy picture but I have knobs for choke, headlights, wipers, and cig lighter.

horn button.

jays68yak · 08-15-2011, 10:38 PM

Quote:

Originally Posted by kev2809

do you have a front passenger fender?

Yes but its got rust in the front corner.

jays68yak · 08-15-2011, 10:39 PM

Quote:

Originally Posted by 72ArizonaBurb

I need the internals out of the tailgate. Not the whole talegate just the push button mechanism and all the rods that connect to the latches. Would need them shipped to 37010. Thanks!

Id like to sell the tailgate complete at this point in time. Thanks tho.

**kev2809** · 08-15-2011, 11:41 PM

hmm..whats bottom dollar shipped to 77471?

i have one im trying to worth with but i really dont want to use it lol

jays68yak · 08-16-2011, 12:05 AM

Quote:

Originally Posted by kev2809

hmm..whats bottom dollar shipped to 77471?

i have one im trying to worth with but i really dont want to use it lol

Hmm never shipped a fender before. lol Let me measure it tomorrow and see what shipping will be.

**kev2809** · 08-16-2011, 05:44 AM

lol..ok cool, just let me know. thanks

Heavy Evy · 08-16-2011, 01:00 PM

Quote:

Originally Posted by jays68yak

Pretty sure the rubber mats are trashed. The tailgate emblem is tweaked a bit.

alright thanks anyways

AzDon · 08-22-2011, 11:18 AM

I'm interested in any of the eleven pieces of glass (not including the widshield) that are not cracked, scratched or pitted. I'd need them shipped to 86404
Don

jays68yak · 08-22-2011, 03:49 PM

Quote:

Originally Posted by AzDon

I'm interested in any of the eleven pieces of glass (not including the widshield) that are not cracked, scratched or pitted. I'd need them shipped to 86404
Don

Good cuz Im keeping the windshield, IF I dont break it when I pull it.

I have some of the glass out but have yet to clean it and check for damage. Give me a few days. I think its all useable.

polock07 · 08-23-2011, 01:18 PM

interested in the passenger side door strike plate, should look different then all the other strike plates, need shipped to 97333

jays68yak · 08-24-2011, 12:03 AM

Quote:

Originally Posted by polock07

interested in the passenger side door strike plate, should look different then all the other strike plates, need shipped to 97333

This guy?

$16 to your door.

On another note, its getting pretty gutted. So if you looking for patch panels better speak up. I might be scraping the body this weekend.

cojnit · 08-24-2011, 05:44 AM

Rear passenger side cab corner? includes dark area, shown in the picture

72ArizonaBurb · 08-24-2011, 08:19 AM

Did anybody buy the tailgate? I still need the interanals from one.

Thanks

camrycurt · 08-24-2011, 08:57 AM

If you still have it, I need the brackets, all of the hardware (including the 4 chrome bolts to mount the bumper to the brackets), and the license plate box with light and mounting hardware for the rear sport bumper. I have a chrome bumper, just not any of the stuff to mount it to the truck.

If you've got that stuff, let me know your price shipped to 20176.

Thanks!

jays68yak · 08-24-2011, 10:38 AM

Quote:

Originally Posted by cojnit

Rear passenger side cab corner? includes dark area, shown in the picture

So number 23 in the picture? That side should be in good shape. Ill get you a picture.

Quote:

Originally Posted by 72ArizonaBurb

Did anybody buy the tailgate? I still need the interanals from one.

Thanks

No, Id still like to sell it complete.

Quote:

Originally Posted by camrycurt

If you still have it, I need the license plate box with light and hardware for the rear sport bumper. I have a bumper, just not the license plate panel.

If you've got that stuff, let me know your price shipped to 20176.

Thanks!

Let me see what kinda shape it is in, I know the bumper is not straight so I want to make sure that didnt get messed up

camrycurt · 08-24-2011, 10:42 AM

Quote:

Originally Posted by jays68yak

Let me see what kinda shape it is in, I know the bumper is not straight so I want to make sure that didnt get messed up

I think I was editing my post at the same time you were replying. I also need the brackets and all of the mounting hardware (including the 4 chrome bolts to mount the bumper) for the bumper.

Condition isn't really critical. My truck is a rusty work in progress so I'm not too picky.

Sorry for the confusion over editing my post.

Let me know what you find.

Thanks!

jays68yak · 08-24-2011, 10:45 AM

Quote:

Originally Posted by camrycurt

I think I was editing my post at the same time you were replying. I also need the brackets and all of the mounting hardware (including the 4 chrome bolts to mount the bumper) for the bumper.

Condition isn't really critical. My truck is a rusty work in progress so I'm not too picky.

Sorry for the confusion over editing my post.

Let me know what you find.

Thanks!

Sneaky...Ill check that stuff out too

08-14-2011, 09:31 PM	#1
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	Parting 67 C10 Suburban Picked this up for a few parts for my build, everything else is up for sale. Front fenders, hood are crap as there is a bunch of rust in them. Can cut patch panels out of the good parts? -Hood Hinges-sold -Rear trim and panels-sold -Seats, all three, rear 2 look in good shape, front needs a new cover.- sold -Fan shroud, didnt see any cracks, good DD. $20 picked up -Air Cleaner top and bottom. Some pitting on the top $10 picked up -Front bumper, DD, Has a small tweak in it. $60 picked up -Core Support, rust under the battery, IMO can be fixed with a patch panel. $60 picked up -Tail gate, Good shape, ding under key, No key, have cover for the latch stuff, didnt see any rust. $150 picked up -hatch, good shape, didnt see any rust, window included $200 picked up See anything else, ask me and Ill price it out. All prices are OBO. Picture Album is here : http://pnkages.com/gallery/v/Parts/6...ban/?g2_page=1 __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. " Last edited by jays68yak; 08-22-2011 at 03:47 PM.

08-14-2011, 11:33 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting 67 C10 Suburban Horn cap, any knobs, and any seatbelts? Price and condition. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-15-2011, 08:45 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting 67 C10 Suburban Original knobs for the dash and radio, and any 67 seat belts. Also, the horn button with the parts underneath. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-15-2011, 01:23 PM	#5
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Parting 67 C10 Suburban any decent carpet or rubber mat? what kind of shape is the chevrolet tailgate emblem in? Posted via Mobile Device Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

08-15-2011, 06:05 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Parting 67 C10 Suburban do you have a front passenger fender? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-15-2011, 06:30 PM	#8
72ArizonaBurb Registered User Join Date: Nov 2010 Location: Clarksville TN Posts: 419	Re: Parting 67 C10 Suburban I need the internals out of the tailgate. Not the whole talegate just the push button mechanism and all the rods that connect to the latches. Would need them shipped to 37010. Thanks!

08-15-2011, 11:41 PM	#12
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Parting 67 C10 Suburban hmm..whats bottom dollar shipped to 77471? i have one im trying to worth with but i really dont want to use it lol __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-16-2011, 05:44 AM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Parting 67 C10 Suburban lol..ok cool, just let me know. thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-22-2011, 11:18 AM	#16
AzDon Registered User Join Date: Oct 2008 Location: Lake Havasu,AZ Posts: 202	Re: Parting 67 C10 Suburban I'm interested in any of the eleven pieces of glass (not including the widshield) that are not cracked, scratched or pitted. I'd need them shipped to 86404 Don

08-23-2011, 01:18 PM	#18
polock07 Polock07 Join Date: Oct 2008 Location: Corvallis, Oregon Posts: 30	Re: Parting 67 C10 Suburban interested in the passenger side door strike plate, should look different then all the other strike plates, need shipped to 97333

08-24-2011, 05:44 AM	#20
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	Re: Parting 67 C10 Suburban Rear passenger side cab corner? includes dark area, shown in the picture __________________ Got "the Midas Touch!"

08-24-2011, 08:19 AM	#21
72ArizonaBurb Registered User Join Date: Nov 2010 Location: Clarksville TN Posts: 419	Re: Parting 67 C10 Suburban Did anybody buy the tailgate? I still need the interanals from one. Thanks

08-24-2011, 08:57 AM	#22
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Parting 67 C10 Suburban If you still have it, I need the brackets, all of the hardware (including the 4 chrome bolts to mount the bumper to the brackets), and the license plate box with light and mounting hardware for the rear sport bumper. I have a chrome bumper, just not any of the stuff to mount it to the truck. If you've got that stuff, let me know your price shipped to 20176. Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear Last edited by camrycurt; 08-24-2011 at 10:37 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.