Who sells 67-68 CST bucket seat foam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikep · 04-08-2003, 10:50 PM

Who sells that foam ?

tom hand · 04-09-2003, 06:19 AM

As far as I know nobody sells reproduction foam "buns". LMC and others sell repair kits but these are just to help saggy seats and would do nothing for seats with missing chunks as most of them you see. For the 69-72 seats I have been looking real hard at the 66-67 chevelle buckets, the look like the same shape, foam is readily available and knowing GM it will bolt right up. I don't know of a seat that has the same shape as the 67-68 seat but that doesn't mean there isn't one. I guess your best bet is to take to an upholstery shop for a "cut and paste" job

71402BB · 04-09-2003, 06:32 AM

HMMM.......... Hopefully there is somebody out there that does sell these..........I have a set for the burb'n just waiting to be taken out of storage!

Zeus · 04-10-2003, 11:57 AM

The mustang bucket seat has the same shape, but I haven't actually measured the chevy foam to see if there is a difference. I will measure the chevy foam and check at the arlington swap meet and respond on here.

I know! I know! FORD SUX but what the hell they will be under the seat cover.

KEH · 04-10-2003, 12:42 PM

I hope somebody sells it, I just bought a set of these buckets!

Castiron9 · 04-10-2003, 01:25 PM

Found this place on the internet maybe they can help you...And they are close to us,,,Good k]luck let us know what you find out..www.autoupholsterykits.com......hope this works,,,,does'nt seem to work ,,,just try and type address into your browser,,,,,,,,,

my1st69 · 05-18-2010, 03:43 AM

does anyone have any new info on this. that would be great

**GMCPaul** · 05-18-2010, 04:40 AM

We carry the 67-68, 69-70 & 71-72 bucket seat foam, 67-68, 69-72 bench seat foam. The buckets for the 67-68 only offer the seat back & bun foam the center seat is not offered. You'll find them here on our web site
http://www.gmcpauls.com/seat_parts_&_misc_.htm
Part# 1571616 for the 67-68 bucket seat back & bun foam.
GMCPaul

Musclerodz · 05-19-2010, 01:02 AM

wow, dragging up a 7 year old thread. Most vendors here including us have it available

my1st69 · 05-19-2010, 02:04 AM

sorry i am a new owner never seen the seat before liked it figured i would ask. sorry from the newbie.lol 7 year old thread lmfao

mbgmike · 05-19-2010, 07:31 PM

Old post but we are working on manufacturing our own foam as it costs so much. I worked for years for Dow helping to make the ingredients so i figure we would start making them. Their are a lot of manufacturing techniques and recipes and it boils down to weather or not we can afford to set it all up.. We are still learning.

04-08-2003, 10:50 PM	#1
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	Who sells 67-68 CST bucket seat foam Who sells that foam ? __________________ No truck :-(

04-09-2003, 06:19 AM	#2
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	As far as I know nobody sells reproduction foam "buns". LMC and others sell repair kits but these are just to help saggy seats and would do nothing for seats with missing chunks as most of them you see. For the 69-72 seats I have been looking real hard at the 66-67 chevelle buckets, the look like the same shape, foam is readily available and knowing GM it will bolt right up. I don't know of a seat that has the same shape as the 67-68 seat but that doesn't mean there isn't one. I guess your best bet is to take to an upholstery shop for a "cut and paste" job __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

04-09-2003, 06:32 AM	#3
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	HMMM.......... Hopefully there is somebody out there that does sell these..........I have a set for the burb'n just waiting to be taken out of storage! __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

04-10-2003, 11:57 AM	#4
Zeus Zeus Join Date: Dec 2002 Location: Dallas, TX Posts: 152	The mustang bucket seat has the same shape, but I haven't actually measured the chevy foam to see if there is a difference. I will measure the chevy foam and check at the arlington swap meet and respond on here. I know! I know! FORD SUX but what the hell they will be under the seat cover. __________________ jesusventura@hotmail.com

04-10-2003, 12:42 PM	#5
KEH Better late than never Join Date: Dec 2001 Location: Columbus, IN Posts: 324	I hope somebody sells it, I just bought a set of these buckets! __________________ 1970 C/10 SWB Stepside

04-10-2003, 01:25 PM	#6
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Seat foam Found this place on the internet maybe they can help you...And they are close to us,,,Good k]luck let us know what you find out..www.autoupholsterykits.com......hope this works,,,,does'nt seem to work ,,,just try and type address into your browser,,,,,,,,, __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY Last edited by Castiron9; 04-10-2003 at 01:38 PM.

05-18-2010, 03:43 AM	#7
my1st69 Registered User Join Date: May 2010 Location: Sinners Paradise, NV Posts: 186	Re: Who sells 67-68 CST bucket seat foam does anyone have any new info on this. that would be great

05-18-2010, 04:40 AM	#8
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,722	Re: Who sells 67-68 CST bucket seat foam We carry the 67-68, 69-70 & 71-72 bucket seat foam, 67-68, 69-72 bench seat foam. The buckets for the 67-68 only offer the seat back & bun foam the center seat is not offered. You'll find them here on our web site http://www.gmcpauls.com/seat_parts_&_misc_.htm Part# 1571616 for the 67-68 bucket seat back & bun foam. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

05-19-2010, 01:02 AM	#9
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: Who sells 67-68 CST bucket seat foam wow, dragging up a 7 year old thread. Most vendors here including us have it available __________________ Mike Redpath

05-19-2010, 02:04 AM	#10
my1st69 Registered User Join Date: May 2010 Location: Sinners Paradise, NV Posts: 186	Re: Who sells 67-68 CST bucket seat foam sorry i am a new owner never seen the seat before liked it figured i would ask. sorry from the newbie.lol 7 year old thread lmfao

05-19-2010, 07:31 PM	#11
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Who sells 67-68 CST bucket seat foam Old post but we are working on manufacturing our own foam as it costs so much. I worked for years for Dow helping to make the ingredients so i figure we would start making them. Their are a lot of manufacturing techniques and recipes and it boils down to weather or not we can afford to set it all up.. We are still learning. Last edited by mbgmike; 05-19-2010 at 07:31 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.