The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-24-2011, 12:52 PM   #1
jimbonice
Registered User
 
jimbonice's Avatar
 
Join Date: Aug 2010
Location: White City, SK
Posts: 411
Rattle hunt

I've got a rattle in my '77 dually, and I believe it might be the front coils rattling in the control arms. I can't see any broken coils. The question I have is, are there supposed to be isolator's between the coils and and control arms? If there are, mine are worn away.
jimbonice is offline   Reply With Quote
Old 08-25-2011, 07:49 AM   #2
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
Re: Rattle hunt

No isolators.
I had an old crew cab truck that had a rattle up front.
I finally found a bad front shock,... that was making the noise.
The outside "can" that covered the shock tube,... had a broken weld.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline   Reply With Quote
Old 08-25-2011, 01:55 PM   #3
jimbonice
Registered User
 
jimbonice's Avatar
 
Join Date: Aug 2010
Location: White City, SK
Posts: 411
Re: Rattle hunt

I'll have to keep searching. The rest of the front end is tight, new shocks that I replaced as well as sway bar bushings. Maybe I could zip tie one of my kids up under the truck to listen for it while I drive around. Mother may not be happy with that, though.
jimbonice is offline   Reply With Quote
Old 08-25-2011, 04:48 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: Rattle hunt

Quote:
Originally Posted by jimbonice View Post
I'll have to keep searching. The rest of the front end is tight, new shocks that I replaced as well as sway bar bushings. Maybe I could zip tie one of my kids up under the truck to listen for it while I drive around. Mother may not be happy with that, though.
Simple solution..... dont tell her.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 08-25-2011, 05:58 PM   #5
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: Rattle hunt

Not that this will help but years ago in the mid 60's my dad had a Ford that had a clunk in the rear and it took months to find. They finally got to the point that they knew it was in the quarter panel area in the trunk and cut a hole in the inside panel. They found a coke bottle hanging on a string with a note in it that said "Glad you finally found it. That noise was driving me crazy." On the same car they found a screw driver in the trans pan on the first oil & filter change.

Odd hard to find noises always remind me of that bottle.

More to the point on my 72 I had the bumper bolts on the right side get a little loose and caused a rattle.
dwcsr is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com