CA Sub patch panels and 4x4 frame parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 09-12-2011, 02:37 PM

I just brought in a 69 sub mounted on what I believe to be a 68 4x4 frame. I will be using the front half of the body for a crew cab, but all other parts are for sale.
spare tire tub in good shape- $50 plus shipping

patches start at $25 plus shipping.

4x4 spring hangers- $25 plus shipping for each hanger

engine cross member- $40 plus shipping

tail housings- $20 shipped for the pair

KrazyRay · 09-12-2011, 02:39 PM

pics

KrazyRay · 09-12-2011, 03:06 PM

pics

Mt Man Chad · 09-12-2011, 08:45 PM

I'll take the two rear spring hangers.
Patch panels...
Area in front of driver side wheel well to door and both tail light housings.
And area behind passenger side rear wheel.

Thanks in advance!
Chad

curly joe · 09-12-2011, 09:46 PM

i need the lower quarter wheel well to 3rd door 15 inches high, also lower rear quarter pass side wheel well to tail light, to just below fuel fill opening, shipped to 48178, thanks curly

KrazyRay · 09-13-2011, 12:22 PM

Chad, The hangers are yours. These patches are $25 each, but I will look closely and take better pics because there is a few rusty spots on this burb. I need to make sure the one patch does not conflict with the crew cab.

curly joe, $25 for this patch, but I will look closely for rust and have a shipping quote Wed.
Thanks,
Ray

RANDOMIZM · 09-13-2011, 01:08 PM

How much for this section passenger & driver side?

Mt Man Chad · 09-13-2011, 05:31 PM

I'll take them!
Also interested in patch from behind driver side rear wheel to tailgate, from mold line down.

athleo · 09-14-2011, 01:01 AM

Ray what about a patch for the roof from the barn doors forward 3ft? Also if no one has spoken for the patch for the lower quarter panel drivers side past rear tire? Any rust on these sections? If good how much shipped to 78552? Thanks...dwt.

KrazyRay · 09-16-2011, 10:30 AM

Quote:

Originally Posted by athleo

Ray what about a patch for the roof from the barn doors forward 3ft? Also if no one has spoken for the patch for the lower quarter panel drivers side past rear tire? Any rust on these sections? If good how much shipped to 78552? Thanks...dwt.

Its $175 total shipped with greyhound to TX.
Thanks,
Ray

curly joe · 09-14-2011, 07:10 AM

thanks ray, also need the patch panel wheel well to tail light both sides 15 inches high, curly joe

Mt Man Chad · 09-14-2011, 10:38 AM

Ray,
Let me know what shipping is to 97463 and how you want payment sent.

KrazyRay · 09-14-2011, 02:55 PM

RANDOMIZM- Sorry, I found a bunch of pin hole rust at the bottom.

curly joe- Sorry, there is rust at the bottoms.

Chad- The only patches worth while are the tail light patches...one has a dent, but not rusty. When I looked closely, I noticed pin holes where I thought it was good on the side patches. $124 total shipped for the 2 tail patches and the 2 rear leaf spring rear hangers. pm sent.

athleo- $75 for the roof section...I will figure shipping Thurs.

Sorry everyone, I should have looked really close on the lower sections to begin with.

Thanks,
Ray

Mt Man Chad · 09-22-2011, 12:27 PM

Payment sent for taillight patches.
Thanks Ray!

6772king · 09-23-2011, 08:35 PM

i need a 8" x8" square cut of the outer skin around the filler neck

KrazyRay · 09-24-2011, 10:24 AM

I checked and there is rust on the inside where the floor meets the outside skin.

6772king · 09-24-2011, 07:01 PM

how is the outer skin?? that is the only part i need

09-12-2011, 02:37 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Sub patch panels and 4x4 frame parts I just brought in a 69 sub mounted on what I believe to be a 68 4x4 frame. I will be using the front half of the body for a crew cab, but all other parts are for sale. spare tire tub in good shape- $50 plus shipping patches start at $25 plus shipping. 4x4 spring hangers- $25 plus shipping for each hanger engine cross member- $40 plus shipping tail housings- $20 shipped for the pair Attached Images Last edited by KrazyRay; 09-12-2011 at 03:04 PM.

09-12-2011, 02:39 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Sub patch panels and 4x4 frame parts pics Attached Images

09-12-2011, 03:06 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Sub patch panels and 4x4 frame parts pics Attached Images

09-12-2011, 08:45 PM	#4
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Sub patch panels and 4x4 frame parts I'll take the two rear spring hangers. Patch panels... Area in front of driver side wheel well to door and both tail light housings. And area behind passenger side rear wheel. Thanks in advance! Chad Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 09-12-2011 at 09:04 PM.

09-12-2011, 09:46 PM	#5
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Sub patch panels and 4x4 frame parts i need the lower quarter wheel well to 3rd door 15 inches high, also lower rear quarter pass side wheel well to tail light, to just below fuel fill opening, shipped to 48178, thanks curly

09-13-2011, 12:22 PM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Sub patch panels and 4x4 frame parts Chad, The hangers are yours. These patches are $25 each, but I will look closely and take better pics because there is a few rusty spots on this burb. I need to make sure the one patch does not conflict with the crew cab. curly joe, $25 for this patch, but I will look closely for rust and have a shipping quote Wed. Thanks, Ray

09-13-2011, 01:08 PM	#7
RANDOMIZM Registered User Join Date: Apr 2009 Location: Seattle, WA Posts: 85	Re: Sub patch panels and 4x4 frame parts How much for this section passenger & driver side? Attached Images __________________ Build Thread: Frankenburb .._________ /____\|__\|__\___ l__(o)______(O)_l Cruizin' Thru... Low N Slow

09-13-2011, 05:31 PM	#8
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Sub patch panels and 4x4 frame parts I'll take them! Also interested in patch from behind driver side rear wheel to tailgate, from mold line down. __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

09-14-2011, 01:01 AM	#9
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Sub patch panels and 4x4 frame parts Ray what about a patch for the roof from the barn doors forward 3ft? Also if no one has spoken for the patch for the lower quarter panel drivers side past rear tire? Any rust on these sections? If good how much shipped to 78552? Thanks...dwt.

09-14-2011, 07:10 AM	#11
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Sub patch panels and 4x4 frame parts thanks ray, also need the patch panel wheel well to tail light both sides 15 inches high, curly joe

09-14-2011, 10:38 AM	#12
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Sub patch panels and 4x4 frame parts Ray, Let me know what shipping is to 97463 and how you want payment sent. __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

09-14-2011, 02:55 PM	#13
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Sub patch panels and 4x4 frame parts RANDOMIZM- Sorry, I found a bunch of pin hole rust at the bottom. curly joe- Sorry, there is rust at the bottoms. Chad- The only patches worth while are the tail light patches...one has a dent, but not rusty. When I looked closely, I noticed pin holes where I thought it was good on the side patches. $124 total shipped for the 2 tail patches and the 2 rear leaf spring rear hangers. pm sent. athleo- $75 for the roof section...I will figure shipping Thurs. Sorry everyone, I should have looked really close on the lower sections to begin with. Thanks, Ray Attached Images

09-22-2011, 12:27 PM	#14
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Sub patch panels and 4x4 frame parts Payment sent for taillight patches. Thanks Ray! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

09-23-2011, 08:35 PM	#15
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Sub patch panels and 4x4 frame parts i need a 8" x8" square cut of the outer skin around the filler neck __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

09-24-2011, 10:24 AM	#16
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Sub patch panels and 4x4 frame parts I checked and there is rust on the inside where the floor meets the outside skin.



Register or Log In To remove these advertisements.

09-24-2011, 07:01 PM	#17
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Sub patch panels and 4x4 frame parts how is the outer skin?? that is the only part i need __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

Register or Log In To remove these advertisements.