The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-27-2011, 04:28 PM   #1
triggerthetruck
Registered User
 
Join Date: Sep 2011
Location: Surrey UK
Posts: 28
Chevy C10 4x4 suspension question...

Hi there...I have a chevy C10 with solid axles front and rear...and the suspension is killing me and my truck is falling apart...the roads here in England are pretty full of pot holes...can anyone tell me about airbag suspension kits please? I dont want to raise or lower..just the normal ride height. What is the best kit, on a budget, to give me a smooth ride. Here we have a kit that bolts to the frame and the axle, springs retained...or there are kits to remove the springs which require steel work to take their place...and then air bags of course....I just want a smooth ride!! Many thanks.
triggerthetruck is offline   Reply With Quote
Old 09-27-2011, 04:33 PM   #2
Your41Plague12
Registered User
 
Your41Plague12's Avatar
 
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 1,009
Re: Chevy C10 4x4 suspension question...

Personally I'd get a set of leaf springs and good shocks. Spring shops can custom make you leaf springs that will ride nicely. The shocks also have a huge bearing on how well it rides. Also make sure, if you do go with new springs, don't use an impact gun on the bolts that hold the springs on. Sometimes this will make them ride like crap if the bolts are over-tightened. Go with some good bushings, too. That's my suggestion. I've never really messed with air bags, but I know you can make a leaf-sprung truck ride OK with some of these precautions.
__________________
Steve
Member of the Foot Pedal Club
'83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL,
Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws,
350 HP 350 crate engine from Jegs, Turbo 400
Your41Plague12 is offline   Reply With Quote
Old 09-27-2011, 04:51 PM   #3
triggerthetruck
Registered User
 
Join Date: Sep 2011
Location: Surrey UK
Posts: 28
Re: Chevy C10 4x4 suspension question...

Thanks for that...I have been mulling over the state of the springs...and I have had at least four or five sets of shocks on the front in four years of ownership so somethings not right. Being in England, spares are difficult to get...without a two week wait for shipping from the US and theres never a choice. We do have spring makers though! My basic problem is I'm 6'-5" with not much spare room to move in the cab...and if I'm driving even just a couple of hours, the suspension tears up my recent hernia operation...which isnt funny.
triggerthetruck is offline   Reply With Quote
Old 09-28-2011, 02:31 AM   #4
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Chevy C10 4x4 suspension question...

Btw its a k10 c means 2wd k means 4x4.
andrewmp6 is offline   Reply With Quote
Old 09-28-2011, 07:01 AM   #5
triggerthetruck
Registered User
 
Join Date: Sep 2011
Location: Surrey UK
Posts: 28
Re: Chevy C10 4x4 suspension question...

Hmm well thanks, I had thought the K was to do with the engine and the C...well I had no idea....in any event, its got four wheels and drives through each...and I have this problem with solid axles and desperately rough suspension. If you can help with a fix I would be very grateful.
triggerthetruck is offline   Reply With Quote
Old 09-28-2011, 08:04 AM   #6
Your41Plague12
Registered User
 
Your41Plague12's Avatar
 
Join Date: Dec 2010
Location: Pittsburgh, PA
Posts: 1,009
Re: Chevy C10 4x4 suspension question...

Could go with a coil setup and a 4 link. A basic search on here will turn up tons of threads. Also make sure to check Pirate4x4.com. They make rock crawlers with crazy suspension travel and flex using coil springs and high-end shocks. Definitely a cool setup and in my opinion, it's safer than bags.
__________________
Steve
Member of the Foot Pedal Club
'83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL,
Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws,
350 HP 350 crate engine from Jegs, Turbo 400
Your41Plague12 is offline   Reply With Quote
Old 09-29-2011, 09:12 AM   #7
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Chevy C10 4x4 suspension question...

There is a coil over kit for the front but its not cheap at all http://offroadltd.com/mm5/merchant.m...ct_Code=ORLK6C
andrewmp6 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com