What does a dually bed look like with the fenders removed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arrover · 09-29-2011, 03:50 PM

What does a dually bed look like with the fenders removed? Are there holes, brackets, or trim on the outside of the bed? Is the inside of the bed the same as a standard bed? If any one has any pictures of a dually bed with the fenders off that would be a big help. I'm thinking of temporarily running a dually bed on a single rear wheel truck. Are they difficult to remove?

Thanks for your help!

88bagedntaged · 09-29-2011, 04:04 PM

Here you go. They are a little tough to remove. A ton of 1/2 inch wrench nuts.

GM72K10 · 09-29-2011, 06:07 PM

Long thin wrench, like a tappet wrench, makes it a whole lot easier. Also easier to do with it upside down like I did.

Goldfinger · 09-29-2011, 06:47 PM

It's a regular bed with fenders

Prerunner1982 · 09-29-2011, 07:03 PM

Quote:

Originally Posted by Goldfinger

It's a regular bed with fenders

However the wheeling opening is larger on the dually bed.

GM72K10 · 09-29-2011, 07:19 PM

Quote:

Originally Posted by Prerunner1982

However the wheeling opening is larger on the dually bed.

yes it is

arrover · 09-29-2011, 08:25 PM

Thanks alot for the help guys! That's great info.

BigBlocksRule · 09-29-2011, 08:49 PM

...and there's a filler piece in there that keeps the wheels from slinging the double-wall bedsides full of crap. Gotta have that!!!

jitteryguy · 09-30-2011, 04:25 PM

Quote:

Originally Posted by 88bagedntaged

Here you go. They are a little tough to remove. A ton of 1/2 inch wrench nuts.

it was easy to get mine off,,, ratchet wrench and a son with skinny arm's !

madcow75 · 09-30-2011, 04:51 PM

Yes a ratchet wrench is a must. Weld a long steel extension on it. Makin it a custom long wrech, to get the corners. It does help.

trout · 09-30-2011, 04:55 PM

wish i could find one but one day

yea there a pain to get off

Desert1957 · 10-01-2011, 10:03 AM

Quote:

Originally Posted by BigBlocksRule

...and there's a filler piece in there that keeps the wheels from slinging the double-wall bedsides full of crap. Gotta have that!!!

Not to hijack this thread , but I need one of these filler pieces if anyone has one...Thanks Desert

BigBlocksRule · 10-01-2011, 10:35 AM

I took one to a sheetmetal shop and had a reverse made for the opposite side, they're kinda hard to find singly. I think I paid $25...

Desert1957 · 10-04-2011, 09:14 AM

Great Idea....Thanks

Hulk Will Smash · 01-18-2012, 03:38 PM

Quote:

Originally Posted by Desert1957

Not to hijack this thread , but I need one of these filler pieces if anyone has one...Thanks Desert

I'm missing one of these as well... Anyone know what it's actually called aside from "filler piece?" Trying to figure out what to search for on the internet!

Any pictures of them? Thanks!

Hulk Will Smash · 01-18-2012, 03:43 PM

Found pitures in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=492084

Anyone know if there's an aftermarket supplier on these?

walkerb · 01-18-2012, 03:52 PM

Honestly I figured that I would have to Fab them somehow. I need set also.

Has anyone tried a chevy dealer? I got lucky with dana 60 dust sheilds so I thought I would check. Havent yet though

Hulk Will Smash · 01-18-2012, 05:10 PM

I just noticed one of mine was missing Sunday! At least now I know why the bed makes so much noise.
Posted via Mobile Device

GM72K10 · 01-18-2012, 06:10 PM

Quote:

Originally Posted by Hulk Will Smash

Found pitures in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=492084

Anyone know if there's an aftermarket supplier on these?

Not that I know of and that's from my truck!

Hulk Will Smash · 01-19-2012, 10:49 AM

Quote:

Originally Posted by GM72K10

Not that I know of and that's from my truck!

Well all right! Thanks man. Your truck is a big help.
Posted via Mobile Device

spudz · 01-19-2012, 02:09 PM

I got fenders, fillers, lights and harness for sale. Local pickup only tho.

http://www.67-72chevytrucks.com/vboa...d.php?t=471706

09-29-2011, 03:50 PM	#1
arrover Registered User Join Date: Sep 2011 Location: NW Arkansas Posts: 291	What does a dually bed look like with the fenders removed? What does a dually bed look like with the fenders removed? Are there holes, brackets, or trim on the outside of the bed? Is the inside of the bed the same as a standard bed? If any one has any pictures of a dually bed with the fenders off that would be a big help. I'm thinking of temporarily running a dually bed on a single rear wheel truck. Are they difficult to remove? Thanks for your help!

09-29-2011, 04:04 PM	#2
88bagedntaged Registered User Join Date: Jan 2010 Location: Dallas Tx Posts: 172	Re: What does a dually bed look like with the fenders removed? Here you go. They are a little tough to remove. A ton of 1/2 inch wrench nuts. Attached Images

09-29-2011, 06:07 PM	#3
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: What does a dually bed look like with the fenders removed? Long thin wrench, like a tappet wrench, makes it a whole lot easier. Also easier to do with it upside down like I did. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

09-29-2011, 06:47 PM	#4
Goldfinger Registered User Join Date: May 2010 Location: laurel hill Fl Posts: 645	Re: What does a dually bed look like with the fenders removed? It's a regular bed with fenders __________________ 1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ] 1999 k3500 crew cab dually 6.5tdi/4l80e

09-29-2011, 08:25 PM	#7
arrover Registered User Join Date: Sep 2011 Location: NW Arkansas Posts: 291	Re: What does a dually bed look like with the fenders removed? Thanks alot for the help guys! That's great info.

09-29-2011, 08:49 PM	#8
BigBlocksRule Registered User Join Date: Jun 2008 Location: Lubbock, TX Posts: 2,047	Re: What does a dually bed look like with the fenders removed? ...and there's a filler piece in there that keeps the wheels from slinging the double-wall bedsides full of crap. Gotta have that!!!

09-30-2011, 04:51 PM	#10
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: What does a dually bed look like with the fenders removed? Yes a ratchet wrench is a must. Weld a long steel extension on it. Makin it a custom long wrech, to get the corners. It does help.

09-30-2011, 04:55 PM	#11
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: What does a dually bed look like with the fenders removed? wish i could find one but one day yea there a pain to get off __________________ Edited by staff

10-01-2011, 10:35 AM	#13
BigBlocksRule Registered User Join Date: Jun 2008 Location: Lubbock, TX Posts: 2,047	Re: What does a dually bed look like with the fenders removed? I took one to a sheetmetal shop and had a reverse made for the opposite side, they're kinda hard to find singly. I think I paid $25...

10-04-2011, 09:14 AM	#14
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: What does a dually bed look like with the fenders removed? Great Idea....Thanks

01-18-2012, 03:43 PM	#16
Hulk Will Smash Registered User Join Date: Apr 2006 Location: Huntington Beach, CA Posts: 492	Re: What does a dually bed look like with the fenders removed? Found pitures in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=492084 Anyone know if there's an aftermarket supplier on these? Attached Images __________________ '87 R30 Crew Cab Dually It's 11 PM, do you know where your IAC pintle is?

01-18-2012, 03:52 PM	#17
walkerb Registered User Join Date: May 2010 Location: Rochester NY Posts: 831	Re: What does a dually bed look like with the fenders removed? Honestly I figured that I would have to Fab them somehow. I need set also. Has anyone tried a chevy dealer? I got lucky with dana 60 dust sheilds so I thought I would check. Havent yet though __________________ 1973 k20 Suburban 350 1974 Custom stepside c-10 250 1975 Chevy stepside 454 1986 K30 Crewcab SRW 350 R.I.P- glimmertwin01- board member and good friend, you will be missed

01-18-2012, 05:10 PM	#18
Hulk Will Smash Registered User Join Date: Apr 2006 Location: Huntington Beach, CA Posts: 492	Re: What does a dually bed look like with the fenders removed? I just noticed one of mine was missing Sunday! At least now I know why the bed makes so much noise. Posted via Mobile Device __________________ '87 R30 Crew Cab Dually It's 11 PM, do you know where your IAC pintle is?

01-19-2012, 02:09 PM	#21
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: What does a dually bed look like with the fenders removed? I got fenders, fillers, lights and harness for sale. Local pickup only tho. http://www.67-72chevytrucks.com/vboa...d.php?t=471706 __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.