10-11-2011, 03:56 PM | #1 |
Registered User
Join Date: May 2011
Location: Murfreesboro,Tn
Posts: 11
|
tire size
I lowered my 66 fleetside 4.5 in front and 5 in back. I have 15x8 truck ralleys with 255/70r15 tires and I can't get the rear wheels on with the suspension relaxed. Do I need a different tire and if so what size? Or is there a trick to getting them in?
|
10-11-2011, 04:13 PM | #2 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: tire size
you got it jacked up with the rear end or frame?
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
10-11-2011, 04:26 PM | #3 |
Registered User
Join Date: May 2011
Location: Murfreesboro,Tn
Posts: 11
|
Re: tire size
I had jack stands under the frame with nothing under the rear end.
|
10-11-2011, 04:29 PM | #4 |
Account Suspended
Join Date: Jul 2007
Location: Plumas Lake, Ca.
Posts: 1,009
|
Re: tire size
I think you're going to find that a nearly 30" tall tire is too much for that much of a drop.
|
10-11-2011, 04:51 PM | #5 |
Registered User
Join Date: May 2011
Location: Murfreesboro,Tn
Posts: 11
|
Re: tire size
That's what I figured. Any idea on what size tire I would need?
|
10-11-2011, 05:05 PM | #6 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
|
Re: tire size
Before you go and get smaller tiers. What I do is jack up only the side of the frame that you want the tire on. This will cause the opposite side tire to take a lot more weight and bring the side you want to put the tire on down a lot further out of the wheel well. If both tiers are off you will need to get a tire that is easy to put on, on the truck first. I would make sure that you have the front tiers on first so that the front of the truck doesn't fall off the jack stands.
|
10-11-2011, 06:15 PM | #7 |
Registered User
Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: tire size
i have 275-60- 15's on mine what i did was to jack up rear end so tire is off ground. put jackstands under then jack up the frame. PITA
|
10-11-2011, 07:44 PM | #8 |
Registered User
Join Date: May 2011
Location: Murfreesboro,Tn
Posts: 11
|
Re: tire size
Any problem with rubbing gimmy 64?
|
Bookmarks |
|
|