progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chainsaw · 10-13-2011, 10:36 PM

Made some progress, got it sanded with 180, prime tomorrow. 1st attempt at painting in 30 + years.

Woogeroo · 10-13-2011, 11:45 PM

woo hoo!

congrats!

-W

likaroc13 · 10-14-2011, 12:00 AM

cool! good luck...what color?

chainsaw · 10-14-2011, 12:33 AM

Just stock single stage blue with white top. Body work is going to be far from perfect, just need some color as it sits outside.

waspp · 10-15-2011, 04:45 PM

Looks great! I started painting again after about 25 and it comes back to you fast, plus these urethane paints are great to use. Good luck

Hal

chainsaw · 10-15-2011, 08:51 PM

I got it in primer today, using tp tools turbine system, its all I have. Most panels look good, smooth execpt the hood. About 20 minutes after the last coat it started looking like it got dirt in it. I used ppg 312 urathane surfacer and slow reducer mixed 4 to 1 to 1, waited 30 minutes between coats. Put on 3 coats. TP tools said to use reducer in the primer as the turbine heats the air. Used a 1.8 tip. This was shot over 5 year old primer that i 180 gritted. What went wrong ,solvent pop? moisture? Thanks.

waspp · 10-15-2011, 09:13 PM

Quote:

Originally Posted by chainsaw

I got it in primer today, using tp tools turbine system, its all I have. Most panels look good, smooth execpt the hood. About 20 minutes after the last coat it started looking like it got dirt in it. I used ppg 312 urathane surfacer and slow reducer mixed 4 to 1 to 1, waited 30 minutes between coats. Put on 3 coats. TP tools said to use reducer in the primer as the turbine heats the air. Used a 1.8 tip. This was shot over 5 year old primer that i 180 gritted. What went wrong ,solvent pop? moisture? Thanks.

Usually that urethane primer is a miracle worker. Is everything nice and dry? not water getting into to your gun is there? The 4-1-1 should be fine, with 3 coats can you smooth it out with some fine paper and paint?

chainsaw · 10-15-2011, 10:15 PM

Every thing was dry, the turbine heats the air, so no water or oil in the paint. I'm going to use 320 wet to see if it sands out, I have just enough primer left to do the hood and maybe the tailgate, I had it in the garage and forgot all about it, it didn't get a single coat.

10-13-2011, 10:36 PM	#1
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	progress Made some progress, got it sanded with 180, prime tomorrow. 1st attempt at painting in 30 + years.

10-13-2011, 11:45 PM	#2
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: progress woo hoo! congrats! -W

10-14-2011, 12:00 AM	#3
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: progress cool! good luck...what color? __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

10-14-2011, 12:33 AM	#4
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: progress Just stock single stage blue with white top. Body work is going to be far from perfect, just need some color as it sits outside.

10-15-2011, 04:45 PM	#5
waspp Registered User Join Date: Sep 2011 Location: Maryville TN Posts: 201	Re: progress Looks great! I started painting again after about 25 and it comes back to you fast, plus these urethane paints are great to use. Good luck Hal

10-15-2011, 08:51 PM	#6
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: progress I got it in primer today, using tp tools turbine system, its all I have. Most panels look good, smooth execpt the hood. About 20 minutes after the last coat it started looking like it got dirt in it. I used ppg 312 urathane surfacer and slow reducer mixed 4 to 1 to 1, waited 30 minutes between coats. Put on 3 coats. TP tools said to use reducer in the primer as the turbine heats the air. Used a 1.8 tip. This was shot over 5 year old primer that i 180 gritted. What went wrong ,solvent pop? moisture? Thanks.

10-15-2011, 10:15 PM	#8
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: progress Every thing was dry, the turbine heats the air, so no water or oil in the paint. I'm going to use 320 wet to see if it sands out, I have just enough primer left to do the hood and maybe the tailgate, I had it in the garage and forgot all about it, it didn't get a single coat.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.