Where to get these lines?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 11-05-2011, 06:07 PM

Does anyone know where to get the braided lines on this orange ride. Check out then brake lines from the master cylinder to the bulk heads in the frame.. Anyone know if this is a kit?

vin63 · 11-05-2011, 06:22 PM

Do you have a hose assembler/provider in your area - serving the aircraft and racing industries? Some of the AC and powersteering hose makers often provide the smaller teflon line service, as well. There are a few in my area such as Bonaco, XRP, G and J Aircraft, etc., who will custom make -3 AN and -4 AN teflon hose assemblies with various degree ends (45, 60, 90, 120, etc. degree). Or, you can invest in some of the tools (cutter, braid separator and olive installer), and buy bulk teflon hose and ends to assemble custom lengths yourself - it's not too difficult. Here's what the braid separator looks like:

http://automotive.become.com/earls-0...--sc1369457597

cdowns · 11-05-2011, 06:44 PM

speedway motors has different lengths and fittings available

C4 Metal Werks · 11-05-2011, 08:22 PM

If you know which fitting diameters you need www.spieglerusa.com has DOT approved custom lines with a lifetime warranty. I've used them for years. Super knowledgeable and friendly.

11-05-2011, 06:07 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Where to get these lines?? Does anyone know where to get the braided lines on this orange ride. Check out then brake lines from the master cylinder to the bulk heads in the frame.. Anyone know if this is a kit? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-05-2011, 06:22 PM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Where to get these lines?? Do you have a hose assembler/provider in your area - serving the aircraft and racing industries? Some of the AC and powersteering hose makers often provide the smaller teflon line service, as well. There are a few in my area such as Bonaco, XRP, G and J Aircraft, etc., who will custom make -3 AN and -4 AN teflon hose assemblies with various degree ends (45, 60, 90, 120, etc. degree). Or, you can invest in some of the tools (cutter, braid separator and olive installer), and buy bulk teflon hose and ends to assemble custom lengths yourself - it's not too difficult. Here's what the braid separator looks like: http://automotive.become.com/earls-0...--sc1369457597 __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

11-05-2011, 06:44 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Where to get these lines?? speedway motors has different lengths and fittings available __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-05-2011, 08:22 PM	#4
C4 Metal Werks Registered User Join Date: Oct 2011 Location: Chico, CA Posts: 87	Re: Where to get these lines?? If you know which fitting diameters you need www.spieglerusa.com has DOT approved custom lines with a lifetime warranty. I've used them for years. Super knowledgeable and friendly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.