Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-08-2011, 10:41 PM | #1 |
Got big-block?
Join Date: Jul 2000
Location: Austin, Texas
Posts: 2,453
|
The K25 gets a new posi and 4.10 gears
Well, the last test drive revealed that the rear end gears were shot...the high-pitched whine was a dead give away, so after some more testing and confirmation, it was time to install some new 4.10's and a new TracLoc posi unit. I am lucky enough to have a good friend who sets-up rearends all the time, so I bought the parts and he did the install.
There's not any pics of the set-up as I was out of town during the install and my buddy didn't take any snaps. He left the rear open to show me the test pattern on the gears and backlash, so I do have a couple of pics with the case spreader installed. Here ya go: First pics are of axles pulled, draining the rear end gear oil, the case spreader installed, the new 4.10 gear set and TracLoc posi installed, and the rear end cover reinstalled.
__________________
'68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396 |
Bookmarks |
|
|