The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-08-2011, 09:43 PM   #1
cessna151
Registered User
 
Join Date: Dec 2011
Location: Missouri
Posts: 6
Need help to identify old cab

My father-in-law recently bought a piece of property which has what appears to be an early 60s Chevy truck cab sitting on the ground. The property is a good 2.5 hour drive away. We will be making the trip this weekend to take pictures.

I know nothing about old trucks and was wondering, when i go to take pictures, is there anything i should be sure to look for and get pictures of that would help identify it. Also is there anything specific i should be sure to take pictures of in order to find out what it's worth and eventually salvage it if it's actually worth something.

Additional info... It is just the cab with front fenders and grille. There is no hood. The cab has both doors and all the windows and the dash looks like it is in fair condition. Pictures will be posted Sunday.

So just to be clear i want to know if there's anything specific i should get pics of because it's a bit of a long trip and i won't be going back for awhile and i want to make sure i get all the pics i need the first time. Thanks for any help.
cessna151 is offline   Reply With Quote
Old 12-08-2011, 09:51 PM   #2
72GMCK-2500
Registered User
 
72GMCK-2500's Avatar
 
Join Date: Feb 2011
Location: West Chester Pa.
Posts: 195
Re: Need help to identify old cab

Welcome to the site! The things you should take pictures of would be any emblems, take pics of the grill and the interior. Then just get an overall picture of the whole cab. We are excellent at recognizing old trucks and values here so dont worry! We'll take care of ya! Good luck in your travel and hope its a real neat truck! Andrew.
__________________
1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride)
1965 GMC 1000 305E V6, Powerglide. GONE
1972 GMC K-2500 350, 4 speed, 229,000 miles
1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4.
1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel.
RUST NEVER SLEEPS
72GMCK-2500 is offline   Reply With Quote
Old 12-08-2011, 09:52 PM   #3
sigshooter
Registered User
 
sigshooter's Avatar
 
Join Date: Aug 2011
Location: Tahlequah, Ok
Posts: 1,235
Re: Need help to identify old cab

VIN will tell it all, year make model, where it was built, etc.... located in driver door jamb
__________________
1965 long bed ( grandpas old truck )
1964 long bed BBW Custom Cab
1966 Short stepside
1964 long bed
1965 long bed Custom Cab, factory air, V-8, powerglide
sigshooter is offline   Reply With Quote
Old 12-08-2011, 09:53 PM   #4
brawley
Easy Does It
 
brawley's Avatar
 
Join Date: Apr 2007
Location: Dirdy Mo , North Carolina
Posts: 450
Re: Need help to identify old cab

right on
brawley is offline   Reply With Quote
Old 12-08-2011, 09:53 PM   #5
pmkrew
Registered User
 
Join Date: Sep 2009
Location: Marietta, Ga
Posts: 115
Re: Need help to identify old cab

VIN NUMBER, USUALLY ON THE TOP OF THE DOOR SILL. other than that good pics of the whole thing, front, back, inside, sides, doors inside and out etc...
pmkrew is offline   Reply With Quote
Old 12-08-2011, 10:00 PM   #6
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: Need help to identify old cab

the vin nbr will not be on the door sill. it will be on the door jam; it could be on the frt , the top or the rear if there is one . most cannot believe to look at the top of the door jam. that is the body part of the door opening
ron

the sill is the bottom part -never there
padresag is offline   Reply With Quote
Old 12-09-2011, 03:10 AM   #7
collins10672
Registered User
 
collins10672's Avatar
 
Join Date: Jan 2009
Location: bean station tennessee
Posts: 398
Re: Need help to identify old cab

on the vin the 60-63 will be on the a pillar,the 64 will be on the b pillar,the 65-66 will be on the door jamb over the top of the driver door.
collins10672 is offline   Reply With Quote
Old 12-09-2011, 03:25 AM   #8
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: Need help to identify old cab

Welcome to the forum. Good luck on your adventure.
markeb01 is offline   Reply With Quote
Old 12-09-2011, 02:00 PM   #9
cessna151
Registered User
 
Join Date: Dec 2011
Location: Missouri
Posts: 6
Re: Need help to identify old cab

Thanks for everyone's replies. This helps alot! I will post pics as soon as i can. Oh and just to be sure i should look on the driver's side for the VIN? I'm only asking because it's gonna take some effort to get the doors open. It's been sitting there for many years. Shovels and chain saws will be needed, lol.
cessna151 is offline   Reply With Quote
Old 12-09-2011, 03:43 PM   #10
72GMCK-2500
Registered User
 
72GMCK-2500's Avatar
 
Join Date: Feb 2011
Location: West Chester Pa.
Posts: 195
Re: Need help to identify old cab

Quote:
Originally Posted by cessna151 View Post
Thanks for everyone's replies. This helps alot! I will post pics as soon as i can. Oh and just to be sure i should look on the driver's side for the VIN? I'm only asking because it's gonna take some effort to get the doors open. It's been sitting there for many years. Shovels and chain saws will be needed, lol.
Thats the fun part!
__________________
1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride)
1965 GMC 1000 305E V6, Powerglide. GONE
1972 GMC K-2500 350, 4 speed, 229,000 miles
1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4.
1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel.
RUST NEVER SLEEPS
72GMCK-2500 is offline   Reply With Quote
Old 12-09-2011, 06:03 PM   #11
csa daddy
Registered User
 
csa daddy's Avatar
 
Join Date: May 2005
Location: evington,va
Posts: 1,205
Re: Need help to identify old cab

Haha good luck with that sounds real fun an welcome
Posted via Mobile Device
csa daddy is offline   Reply With Quote
Old 12-09-2011, 06:39 PM   #12
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
Re: Need help to identify old cab

Place your bets gentlemen on what year it is!
aerotruk63 is offline   Reply With Quote
Old 12-09-2011, 08:20 PM   #13
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: Need help to identify old cab

If you can't get the doors open to get at the VIN, be sure to take pics of the front fender emblems. If they are original to the truck the emblems alone will tell the year. But then again, if it's been sitting on the ground long enough that you must dig to get the doors open, you may as well dig a deep enough hole to bury it. LOL
oem4me is offline   Reply With Quote
Old 12-09-2011, 08:36 PM   #14
SIR
SIR
 
SIR's Avatar
 
Join Date: Apr 2005
Location: grants pass oregon,usa
Posts: 658
Re: Need help to identify old cab

FIRST....BRING A BUDDY, A STRONG ONE, A 2x6 8', MAYBE 2...GET IT OFF THE GROUND!!, THIS MIGHT HELP PREVENT FURTHER DAMAGE, AND MAKE ID EASY, AND TRANSPORT FASTER WHEN YOUR READY TO BRING IT HOME...GOOD LUCK WITH YOUR "MYSTERY" PROJECT...
__________________
66long low fleet http://community.webshots.com/user/LVNR66
SIR is offline   Reply With Quote
Old 12-11-2011, 02:44 PM   #15
cessna151
Registered User
 
Join Date: Dec 2011
Location: Missouri
Posts: 6
Re: Need help to identify old cab

After about an hour, we got the doors open. Even though it was only a couple inches under the surface, the problem was since it was in the woods there were a bunch of roots to dig out to get the doors open. I do not have the tools or manpower to completely dig it out or transport it. If somebody might want it they will have to come and get it themselves.

I took a total of 39 Hi-res pictures. Below is a sample. So now with the pics posted you are welcome to ID it. Also whether you think it is worth anything or not would help too. If anyone wants any or all of the hi-res pics I can email them to you.

VIN# (i'm sure the number that is scratched is a 3):
http://rc.runryder.com/fastphoto/35035/VIN.jpg

Cert tag:
http://rc.runryder.com/fastphoto/35035/cert.jpg

Driver's side:
http://rc.runryder.com/fastphoto/35035/side.jpg

Interior:
http://rc.runryder.com/fastphoto/35035/interior.jpg

Grill:
http://rc.runryder.com/fastphoto/35035/grill.jpg

Fender emblem:
http://rc.runryder.com/fastphoto/35035/emblem.jpg

Some more info... The passenger door lever/latch is fully functional as well as the window lever. All windows are in good condition except the windshield has a crack in one spot where something has hit. The gas tank and cap look good. The seat frame appears fully functional as well. The only major rust appears to be on the floor. The gauges on the dash look good but what condition they are really in who knows.
cessna151 is offline   Reply With Quote
Old 12-11-2011, 03:00 PM   #16
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: Need help to identify old cab

no access to the photos. it says "Forbidden".
oem4me is offline   Reply With Quote
Old 12-11-2011, 03:38 PM   #17
SIR
SIR
 
SIR's Avatar
 
Join Date: Apr 2005
Location: grants pass oregon,usa
Posts: 658
Re: Need help to identify old cab

"ditto"
__________________
66long low fleet http://community.webshots.com/user/LVNR66
SIR is offline   Reply With Quote
Old 12-11-2011, 03:56 PM   #18
el minero
Registered User
 
el minero's Avatar
 
Join Date: Apr 2011
Location: Frampton's Mountain UT
Posts: 47
Re: Need help to identify old cab

Looks like what's left of a '64 1 ton.
el minero is offline   Reply With Quote
Old 12-11-2011, 03:56 PM   #19
cessna151
Registered User
 
Join Date: Dec 2011
Location: Missouri
Posts: 6
Re: Need help to identify old cab

Seems i can't edit my posts. Is this for real?

Here are new links...

VIN# (i'm sure the number that is scratched is a 3):
https://skydrive.live.com/redir.aspx...12069D3FA2!106

Cert tag:
https://skydrive.live.com/redir.aspx...12069D3FA2!106

Driver's side:
https://skydrive.live.com/redir.aspx...12069D3FA2!106

Interior:
https://skydrive.live.com/redir.aspx...12069D3FA2!106

Grill:
https://skydrive.live.com/redir.aspx...12069D3FA2!106

Fender emblem:
https://skydrive.live.com/redir.aspx...12069D3FA2!106
cessna151 is offline   Reply With Quote
Old 12-11-2011, 05:17 PM   #20
krazy_texan
Registered User
 
krazy_texan's Avatar
 
Join Date: Oct 2002
Location: West Des Moines, Ia
Posts: 3,233
Re: Need help to identify old cab

yup looks like a 64 to me, some one correct me if i am wrong but i believe those emblems might fetch a little cash i dont think anyone repops c-30 emblems
__________________
Krazy Texan
My Trucks are made with Wrenches not Chop Sticks
1967 GMC 3/4 ton "Johnny Cash"
1990 v1500 suburban
1967 Ford f100 Swb 4x4 "green bean"


GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO
krazy_texan is offline   Reply With Quote
Old 12-11-2011, 07:23 PM   #21
trevota
Registered User
 
Join Date: Jan 2010
Location: maple ridge BC canada
Posts: 58
Re: Need help to identify old cab

steering wheel and guage cluster will be worth some $$$ as well
trevota is offline   Reply With Quote
Old 12-11-2011, 08:05 PM   #22
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: Need help to identify old cab

The earlier links can be viewed (they are much clearer) by copying each link beginning with rc.runryder~ and pasting it into a new window. Don't copy the http:// or it doesn't work.

That thing has had a hard life. I see very little worth salvage. If you're not a 60-66 enthusiast, I’d suggest the only things worth salvaging are the C30 emblems. They might be easy to sell.

In addition to the steering wheel and gauge cluster there are other parts that someone might want such as the radiator aprons, parts from the heater, door handles, hood hinges, cowl panel, maybe the glass is good, and the roof panel might be worth something to a person with a rusted out roof. But for someone that isn’t really into this type project the whole thing is probably only worth scrap metal value, since the small parts won’t bring much money compared to how much work it is to remove and attempt to sell them.
markeb01 is offline   Reply With Quote
Old 12-11-2011, 09:42 PM   #23
jonzcustomshop
1961 crewcab
 
jonzcustomshop's Avatar
 
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
Re: Need help to identify old cab

it is unfortunate, but I agree with mark...
jonzcustomshop is offline   Reply With Quote
Old 12-13-2011, 03:13 PM   #24
cessna151
Registered User
 
Join Date: Dec 2011
Location: Missouri
Posts: 6
Re: Need help to identify old cab

Thanks everyone for your help. Having found a couple of vin decoders i have to agree it is a 64. Also it was a 2wd assembled in St. Louis.

Regarding what you said mark, i would also agree. However, i'm in no hurry to get rid of it. If i wanted to see if anyone were interested, where would be the best place to list it?
cessna151 is offline   Reply With Quote
Old 12-13-2011, 03:25 PM   #25
SIR
SIR
 
SIR's Avatar
 
Join Date: Apr 2005
Location: grants pass oregon,usa
Posts: 658
Re: Need help to identify old cab

is there trim around the front window?? if so GRAB IT...& the clips that hold it together ............
__________________
66long low fleet http://community.webshots.com/user/LVNR66
SIR is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com