for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 01-29-2002, 10:42 PM

400 small block 2 bolt main. threw a rod but can be rebuilt. I have all parts except the oil pan and a few bolts.

Tilt steering column for a automatic 73-87 Chevy/GMC truck. out of '74 c/20. $65

gearhead dave · 02-05-2002, 10:32 PM

what do you want for the 400? where are you located?

thanks
Dave

**crossy** · 02-06-2002, 08:22 PM

DAve, if you click on the little face with a question mark next to it ,that is their profile and most of the time you can find out where they're from. He is from Wisconsin, a chezhead.
Is that tilt from a from a colummn auto shift?tight at the knuckle? key with it ? thanx, DAVE C.

------------------
with all the rocks that I turn over I should be finding more than slugs!

**MJN** · 02-06-2002, 10:08 PM

Well whatever you call us I still like the same trucks. The column is a auto shift on the column, with the key and I can check if there is any play in the knuckle. I tore down a cab and just put the column on the shelf. I never tried it out. I'll check on the play.

01-29-2002, 10:42 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	for sale 400 small block 2 bolt main. threw a rod but can be rebuilt. I have all parts except the oil pan and a few bolts. Tilt steering column for a automatic 73-87 Chevy/GMC truck. out of '74 c/20. $65 __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

02-05-2002, 10:32 PM	#2
gearhead dave Registered User Join Date: Jul 2000 Location: horn lake,ms Posts: 388	what do you want for the 400? where are you located? thanks Dave __________________ 1976 Crew Cab Dually (under construction) 1972 Suburban 1955 Pro Street Chevy 1985 S-10 Blazer (daily driver) V W Sandrail Located in Horn Lake, MS that's just 4 miles south of Memphis TN www.classictruckshop.com/clubs/earlyburbs/members/gallery2/223/display.htm Former engine builder for Racing Head Service Performance Engines in Memphis TN. over 1,600 plus engines built by little ole me!! GOD BLESS THE BRAVEST OF THE BRAVE...THE NEW YORK CITY FIRE FIGHTERS!!

02-06-2002, 08:22 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	DAve, if you click on the little face with a question mark next to it ,that is their profile and most of the time you can find out where they're from. He is from Wisconsin, a chezhead. Is that tilt from a from a colummn auto shift?tight at the knuckle? key with it ? thanx, DAVE C. ------------------ with all the rocks that I turn over I should be finding more than slugs! __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

02-06-2002, 10:08 PM	#4
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Well whatever you call us I still like the same trucks. The column is a auto shift on the column, with the key and I can check if there is any play in the knuckle. I tore down a cab and just put the column on the shelf. I never tried it out. I'll check on the play. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.