Plug wire boot on header boot. See pic. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

52 Rat · 01-20-2012, 11:14 PM

After installing my headers this afternoon, I noticed the number 3 plug wire boot resting on the header tube. Several of the plug wire boots are very close to the headers. I called MSD and they said I needed their part 32829. They allow for a 45 degree bend at the plug boot. I had not planned on purchasing plug wires but I guess I will.

What are you guy using for plug wires? Any suggestions or recommendations?

BR3W CITY · 01-21-2012, 01:33 PM

I'm using Taylor 8.5mm wires, but I have tbss manifolds and they have a bit more clearance between the tubes than a header does. They offer a 45 and standard boot.

01-20-2012, 11:14 PM	#1
52 Rat Registered User Join Date: Aug 2010 Location: Asheville, NC Posts: 291	Plug wire boot on header boot. See pic. After installing my headers this afternoon, I noticed the number 3 plug wire boot resting on the header tube. Several of the plug wire boots are very close to the headers. I called MSD and they said I needed their part 32829. They allow for a 45 degree bend at the plug boot. I had not planned on purchasing plug wires but I guess I will. What are you guy using for plug wires? Any suggestions or recommendations? __________________ My build project http://67-72chevytrucks.com/vboard/s...=1#post4158671

01-21-2012, 01:33 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Plug wire boot on header boot. See pic. I'm using Taylor 8.5mm wires, but I have tbss manifolds and they have a bit more clearance between the tubes than a header does. They offer a 45 and standard boot. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.