CA Next up: Parting 79 1/2 ton 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-24-2012, 01:03 PM

Not many parts here. I will be chopping this one up this week.

235/75/15 tires with 90% tread on white wagon wheels...$200 set of 4 local
5 lug front suspension/brakes...$100 local
red seat belts...$32 shipped
headlight bezels driver condition...$20 pair plus shipping
grille emblem...$11 shipped
fender emblems...$18 shipped if the studs don't break when removing
vent windows...$20 each plus shipping Brandon is up on the left side
red arm rests... $5 each plus shipping

Please respond in thread to avoid confusion.
Thanks,
Ray

KrazyRay · 01-24-2012, 01:13 PM

pics

Liddy71 · 01-24-2012, 02:10 PM

pics off the grille emblem pitting on it an how is the chrome

trout · 01-24-2012, 02:35 PM

i know i shouldnt but whats the shape on the cab trim under the back window? corners and the long peice and how much shipped to 29073

KrazyRay · 01-24-2012, 05:28 PM

Liddy71...There is some light pitting, however , there is a crack in the middle section. Its a stretch to call this driver condition. I thought someone would want to fill in a blank on the cheap.
trout...The trim is junk on this one, but the previous truck was pretty good. I would call driver condition. $20 but the shipping will be pricey.
Thanks,
Ray

JRANGER · 01-24-2012, 06:06 PM

Front wheel wells?

Liddy71 · 01-24-2012, 06:55 PM

thanks

madcow75 · 01-24-2012, 07:07 PM

interested in Headlight bezels pending some pictures please. I no you say they are driver quality but are they pitted? How much to 14222

madcow75 · 01-24-2012, 08:05 PM

Does it have a cruise control setup?

madcow75 · 01-24-2012, 09:31 PM

With scrapin and partin these trucks do you have a good set of free moving good door hinges both drivers and passenger side.

SC C-10 · 01-24-2012, 10:20 PM

Are the belts in good shape, especially the plastic covers? (pics please) Also, is the seat cover in one piece and if so, would you take it off and sell it with the belts? Maybe a package on these and the armrests?

Thanks.

KrazyRay · 01-25-2012, 02:28 AM

Quote:

Originally Posted by SC C-10

Are the belts in good shape, especially the plastic covers? (pics please) Also, is the seat cover in one piece and if so, would you take it off and sell it with the belts? Maybe a package on these and the armrests?

Thanks.

I will pull these parts Wed. and post pics and package prices. The seat cover is in bad shape.
Thanks,
Ray

SC C-10 · 01-25-2012, 08:17 AM

Quote:

Originally Posted by KrazyRay

I will pull these parts Wed. and post pics and package prices. The seat cover is in bad shape.
Thanks,
Ray

Thanks for the response. Definitely interested in the belts and armrests. Thanks for the effort.
Jon

KrazyRay · 01-25-2012, 11:49 AM

pics inner fender

KrazyRay · 01-24-2012, 10:29 PM

The inner fenders are in useable condition. The main issue is on the right inner where it bolts to the underside of the fender...a layer of rust has peeled away. $40 for the pair of inners plus greyhound shipping. Liddy71 is first up since he asked first, JRANGER is 2nd
pics soon...
madcow75...the bezels have some small dings from road debris, no cruise, and I will check these 2 trucks for hinges...pics and shipping quotes soon.
Thanks,
Ray

54Caddy · 01-24-2012, 10:58 PM

want to cut some patch panels out of the bed??

KrazyRay · 01-24-2012, 11:39 PM

This bed is too nice to cut up...Sorry

JRANGER · 01-24-2012, 11:40 PM

haha, thats 2 in a tow on the bed lol

54Caddy · 01-25-2012, 01:54 AM

Man ray your killing me with the NO answers ahaha.. So how nice is it, bed floor straight? dents? and a Price would help its a short bed correct

KrazyRay · 01-25-2012, 01:58 AM

The bed is very good trailer quality...the sides are good and its a long bed. I have a 73 short bed truck that I might restore. Hey, I gave you a yes on the vent window.

54Caddy · 01-25-2012, 02:01 AM

I didnt even see that Ray. how much more too ship? 93277

KrazyRay · 01-25-2012, 02:31 AM

Quote:

Originally Posted by 54Caddy

I didnt even see that Ray. how much more too ship? 93277

I will do the shipping for $10 for a total of $30 shipped. This vent window functions very well which is rare for the squares.
Thanks,
Ray

JRANGER · 01-25-2012, 12:12 PM

yeah those inners are def better then mine!

KrazyRay · 01-25-2012, 03:16 PM

SC C-10...I can do a package deal of $42 shipped for the belts, arm rests, and the super custom emblem. The shoulder belt bolt covers are missing, there is some fading on the shoulders, and there is a crack on one lap housing. The driver arm rest has trauma at one screw on the underside. see pics:
Thanks,
Ray

SC C-10 · 01-25-2012, 03:22 PM

Sounds great. Can you send a pm and let me know how you want payment? I'll reply with the address.
Thanks,
Jon

01-24-2012, 01:03 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Next up: Parting 79 1/2 ton 2wd Not many parts here. I will be chopping this one up this week. 235/75/15 tires with 90% tread on white wagon wheels...$200 set of 4 local 5 lug front suspension/brakes...$100 local red seat belts...$32 shipped headlight bezels driver condition...$20 pair plus shipping grille emblem...$11 shipped fender emblems...$18 shipped if the studs don't break when removing vent windows...$20 each plus shipping Brandon is up on the left side red arm rests... $5 each plus shipping Please respond in thread to avoid confusion. Thanks, Ray Attached Images

01-24-2012, 01:13 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd pics Attached Images

01-24-2012, 02:10 PM	#3
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Next up: Parting 79 1/2 ton 2wd pics off the grille emblem pitting on it an how is the chrome

01-24-2012, 02:35 PM	#4
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: Next up: Parting 79 1/2 ton 2wd i know i shouldnt but whats the shape on the cab trim under the back window? corners and the long peice and how much shipped to 29073 __________________ Edited by staff

01-24-2012, 05:28 PM	#5
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd Liddy71...There is some light pitting, however , there is a crack in the middle section. Its a stretch to call this driver condition. I thought someone would want to fill in a blank on the cheap. trout...The trim is junk on this one, but the previous truck was pretty good. I would call driver condition. $20 but the shipping will be pricey. Thanks, Ray

01-24-2012, 06:06 PM	#6
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Next up: Parting 79 1/2 ton 2wd Front wheel wells? __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-24-2012, 06:55 PM	#7
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Next up: Parting 79 1/2 ton 2wd thanks

01-24-2012, 07:07 PM	#8
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Next up: Parting 79 1/2 ton 2wd interested in Headlight bezels pending some pictures please. I no you say they are driver quality but are they pitted? How much to 14222

01-24-2012, 08:05 PM	#9
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Next up: Parting 79 1/2 ton 2wd Does it have a cruise control setup?

01-24-2012, 09:31 PM	#10
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Next up: Parting 79 1/2 ton 2wd With scrapin and partin these trucks do you have a good set of free moving good door hinges both drivers and passenger side.

01-24-2012, 10:20 PM	#11
SC C-10 Registered User Join Date: Dec 2010 Location: Fountain Inn, South Carolina Posts: 128	Re: Next up: Parting 79 1/2 ton 2wd Are the belts in good shape, especially the plastic covers? (pics please) Also, is the seat cover in one piece and if so, would you take it off and sell it with the belts? Maybe a package on these and the armrests? Thanks. __________________ 1969 C-10 short step 1981 CJ7 2017 Ram 2500 Laramie 4X4 1939 Cadillac LaSalle sedan 1950 Allis Chalmers B 1998 Bullet 21 XD 300 Merc/water hot rod

01-25-2012, 11:49 AM	#14
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd pics inner fender Attached Images

01-24-2012, 10:29 PM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd The inner fenders are in useable condition. The main issue is on the right inner where it bolts to the underside of the fender...a layer of rust has peeled away. $40 for the pair of inners plus greyhound shipping. Liddy71 is first up since he asked first, JRANGER is 2nd pics soon... madcow75...the bezels have some small dings from road debris, no cruise, and I will check these 2 trucks for hinges...pics and shipping quotes soon. Thanks, Ray Attached Images

01-24-2012, 10:58 PM	#16
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Next up: Parting 79 1/2 ton 2wd want to cut some patch panels out of the bed?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-24-2012, 11:39 PM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd This bed is too nice to cut up...Sorry



Register or Log In To remove these advertisements.

01-24-2012, 11:40 PM	#18
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Next up: Parting 79 1/2 ton 2wd haha, thats 2 in a tow on the bed lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-25-2012, 01:54 AM	#19
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Next up: Parting 79 1/2 ton 2wd Man ray your killing me with the NO answers ahaha.. So how nice is it, bed floor straight? dents? and a Price would help its a short bed correct __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-25-2012, 01:58 AM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd The bed is very good trailer quality...the sides are good and its a long bed. I have a 73 short bed truck that I might restore. Hey, I gave you a yes on the vent window.

01-25-2012, 02:01 AM	#21
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Next up: Parting 79 1/2 ton 2wd I didnt even see that Ray. how much more too ship? 93277 __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-25-2012, 12:12 PM	#23
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Next up: Parting 79 1/2 ton 2wd yeah those inners are def better then mine! __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-25-2012, 03:16 PM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Next up: Parting 79 1/2 ton 2wd SC C-10...I can do a package deal of $42 shipped for the belts, arm rests, and the super custom emblem. The shoulder belt bolt covers are missing, there is some fading on the shoulders, and there is a crack on one lap housing. The driver arm rest has trauma at one screw on the underside. see pics: Thanks, Ray Attached Images

01-25-2012, 03:22 PM	#25
SC C-10 Registered User Join Date: Dec 2010 Location: Fountain Inn, South Carolina Posts: 128	Re: Next up: Parting 79 1/2 ton 2wd Sounds great. Can you send a pm and let me know how you want payment? I'll reply with the address. Thanks, Jon __________________ 1969 C-10 short step 1981 CJ7 2017 Ram 2500 Laramie 4X4 1939 Cadillac LaSalle sedan 1950 Allis Chalmers B 1998 Bullet 21 XD 300 Merc/water hot rod

Register or Log In To remove these advertisements.