C-10/K-10/K-20 Restored Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tabarcus · 01-27-2012, 11:02 PM

What is a 1968 Restored HIgh Bump Cab with title worth?
Without Title?

VA72C10 · 01-28-2012, 12:38 AM

How's the header area, dash, around the window, cab corners, and especially the mounts?

Is that welded repair only or fiberglass/bondo on the driver's side?

All that plays into the value. If it's a K truck is the correct # frame with it? That makes a big difference to...

tabarcus · 01-28-2012, 04:38 AM

Quote:

Originally Posted by VA72C10

How's the header area, dash, around the window, cab corners, and especially the mounts?

Is that welded repair only or fiberglass/bondo on the driver's side?

All that plays into the value. If it's a K truck is the correct # frame with it? That makes a big difference to...

All is clean and weld repairs made.

**special-K** · 01-28-2012, 09:23 AM

What's restored on it? I need a better description and/or pictures. If that's a patch at the driver side floor by the kick panel,then that's repaired,not restored. Restored would be a new floor pan,seam to seam,so you couldn't tell anything was fixed. Restored means put back "as original". Even a properly repaired cab is worth decent money. It sure beats one that's rusted out. But a buyer wants to know they are paying for something that will hold up and be a better option than repairing what they have. Values are all over the place from $500-up. In the end,no matter if it needs repaired,been repaired,or is thoroughly restored,what I find determines what it's worth is based on a complete and honest description. Not everyone can appreciate the work and/or expense saved by buying a bolt-on cab.

01-27-2012, 11:02 PM	#1
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	C-10/K-10/K-20 Restored Cab What is a 1968 Restored HIgh Bump Cab with title worth? Without Title? Attached Images

01-28-2012, 12:38 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: C-10/K-10/K-20 Restored Cab How's the header area, dash, around the window, cab corners, and especially the mounts? Is that welded repair only or fiberglass/bondo on the driver's side? All that plays into the value. If it's a K truck is the correct # frame with it? That makes a big difference to... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-28-2012, 09:23 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: C-10/K-10/K-20 Restored Cab What's restored on it? I need a better description and/or pictures. If that's a patch at the driver side floor by the kick panel,then that's repaired,not restored. Restored would be a new floor pan,seam to seam,so you couldn't tell anything was fixed. Restored means put back "as original". Even a properly repaired cab is worth decent money. It sure beats one that's rusted out. But a buyer wants to know they are paying for something that will hold up and be a better option than repairing what they have. Values are all over the place from $500-up. In the end,no matter if it needs repaired,been repaired,or is thoroughly restored,what I find determines what it's worth is based on a complete and honest description. Not everyone can appreciate the work and/or expense saved by buying a bolt-on cab. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-28-2012 at 11:14 AM. Reason: Had to add some "L"s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.