im new to the forum! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65-c fire/medic · 02-02-2012, 04:24 PM

i am going to air bag this on a budget. not planning on cutting the floor or notching the frame. i was wondering if any one had any templates for the rear mounts or front mounts for the bags. the truck has trailing arms in the rear and original a arms out front.

1963c-10 · 02-02-2012, 04:26 PM

Great looking truck....always nice to have a fellow paramedic here too. Im sure you'll get some feedback from the guys who drop em here.

Rich 5150 69 · 02-02-2012, 04:34 PM

Cool a hamered lid, you`re about as low as you can go in the rear without c-notching the frame. And Welcome to the site...

65-c fire/medic · 02-02-2012, 04:36 PM

thanks man. i was going to make it an old farm truck but my pin stirper changed my mind. its a lil squirley for my taste but it looks cool and grabs attention. this is just my beater until i get my 29 model A coupe finished.

65-c fire/medic · 02-02-2012, 04:37 PM

rich, i still have about 4 inches between i can go in the rear on frame and bed clearance.

Rich 5150 69 · 02-02-2012, 04:44 PM

Quote:

Originally Posted by 65-c fire/medic

rich, i still have about 4 inches between i can go in the rear on frame and bed clearance.

The problem is suspension travel, any little bump it will put the frame down on the axle,

61_FL_Apache · 02-02-2012, 04:38 PM

Welcome! I just sent you a PM with some links to my two trucks that has air ride in them. Let me know if you have any questions.

65-c fire/medic · 02-02-2012, 04:43 PM

thanks 61 apache. thats pretty a down and dirty install thats what i want to do but no notch.

65-c fire/medic · 02-02-2012, 04:47 PM

a few more pics with the louvered hood....

Rich 5150 69 · 02-02-2012, 04:49 PM

Nice truck Medic..

65-c fire/medic · 02-02-2012, 04:49 PM

how much travel is in an air bag? can i not just run 80% full while driving to gain my clearance back?

61_FL_Apache · 02-02-2012, 05:03 PM

My 65 was notched but the 61 is not.

b2948kevin · 02-02-2012, 05:33 PM

Wow, very slick look. I will be watching this for sure.

Dinos63 · 02-02-2012, 05:35 PM

Welcome!! Dig the truck

65-c fire/medic · 02-02-2012, 07:24 PM

Keep the comments coming please!
Posted via Mobile Device

1Bad62Pro/Street · 02-02-2012, 07:42 PM

Welcome from NC.
The 1960 - 1966 Member Introductions
http://67-72chevytrucks.com/vboard/s...d.php?t=498980

markeb01 · 02-02-2012, 08:23 PM

Welcome to the forum. Love the chop and the louvers. Thanks for sharing the photos.

tripleD · 02-02-2012, 09:45 PM

looks cool i would leave it alone! cool truck!

**Corts60** · 02-02-2012, 10:05 PM

I love the stance! Sweet truck. Welcome to the forum!

likaroc13 · 02-02-2012, 10:19 PM

welcome, and cool truck! how much is it chopped?

**Captainfab** · 02-03-2012, 01:29 AM

Welcome to the forum

I like the chop top

Sorry I can't help you with the suspension drop.

65-c fire/medic · 02-03-2012, 07:40 AM

6 inches out of the top
Posted via Mobile Device

scottofksu · 02-03-2012, 09:16 AM

Welcome to the forum!

Not sure if this is something you'll need, but these bag cups are for sale in the classified section and they seem to be a good deal and the individual selling them is legit...

http://67-72chevytrucks.com/vboard/s...d.php?t=493090

Love the look of your truck, by the way!

02-02-2012, 04:24 PM	#1
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	im new to the forum! i am going to air bag this on a budget. not planning on cutting the floor or notching the frame. i was wondering if any one had any templates for the rear mounts or front mounts for the bags. the truck has trailing arms in the rear and original a arms out front. Attached Images

02-02-2012, 04:26 PM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: im new to the forum! Great looking truck....always nice to have a fellow paramedic here too. Im sure you'll get some feedback from the guys who drop em here. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-02-2012, 04:34 PM	#3
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: im new to the forum! Cool a hamered lid, you`re about as low as you can go in the rear without c-notching the frame. And Welcome to the site... __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

02-02-2012, 04:36 PM	#4
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! thanks man. i was going to make it an old farm truck but my pin stirper changed my mind. its a lil squirley for my taste but it looks cool and grabs attention. this is just my beater until i get my 29 model A coupe finished.

02-02-2012, 04:37 PM	#5
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! rich, i still have about 4 inches between i can go in the rear on frame and bed clearance.

02-02-2012, 04:38 PM	#7
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: im new to the forum! Welcome! I just sent you a PM with some links to my two trucks that has air ride in them. Let me know if you have any questions. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

02-02-2012, 04:43 PM	#8
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! thanks 61 apache. thats pretty a down and dirty install thats what i want to do but no notch.

02-02-2012, 04:47 PM	#9
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! a few more pics with the louvered hood.... Attached Images

02-02-2012, 04:49 PM	#10
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: im new to the forum! Nice truck Medic.. __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

02-02-2012, 04:49 PM	#11
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! how much travel is in an air bag? can i not just run 80% full while driving to gain my clearance back?

02-02-2012, 05:03 PM	#12
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: im new to the forum! My 65 was notched but the 61 is not. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

02-02-2012, 05:33 PM	#13
b2948kevin Registered User Join Date: Jun 2011 Location: Bellevue, WA Posts: 304	Re: im new to the forum! Wow, very slick look. I will be watching this for sure. __________________ 66 Chevy C10 Stepside LWB My Build Thread 75 Harley FLH 84 Mercedes 300TD Diesel Wagon

02-02-2012, 05:35 PM	#14
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: im new to the forum! Welcome!! Dig the truck __________________ CHEVY ONLY... Nothin Else !

02-02-2012, 07:24 PM	#15
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! Keep the comments coming please! Posted via Mobile Device

02-02-2012, 07:42 PM	#16
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: im new to the forum! Welcome from NC. The 1960 - 1966 Member Introductions http://67-72chevytrucks.com/vboard/s...d.php?t=498980 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.



Register or Log In To remove these advertisements.

02-02-2012, 08:23 PM	#17
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: im new to the forum! Welcome to the forum. Love the chop and the louvers. Thanks for sharing the photos.

02-02-2012, 09:45 PM	#18
tripleD Registered User Join Date: Apr 2009 Location: newport,nc Posts: 234	Re: im new to the forum! looks cool i would leave it alone! cool truck! __________________ triple d

02-02-2012, 10:05 PM	#19
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: im new to the forum! I love the stance! Sweet truck. Welcome to the forum! __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

02-02-2012, 10:19 PM	#20
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: im new to the forum! welcome, and cool truck! how much is it chopped? __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

02-03-2012, 01:29 AM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: im new to the forum! Welcome to the forum I like the chop top Sorry I can't help you with the suspension drop. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-03-2012, 07:40 AM	#22
65-c fire/medic Registered User Join Date: Feb 2012 Location: Middletown ohio Posts: 8	Re: im new to the forum! 6 inches out of the top Posted via Mobile Device

02-03-2012, 09:16 AM	#23
scottofksu Registered User Join Date: Nov 2011 Location: Omaha, Nebraska Posts: 437	Re: im new to the forum! Welcome to the forum! Not sure if this is something you'll need, but these bag cups are for sale in the classified section and they seem to be a good deal and the individual selling them is legit... http://67-72chevytrucks.com/vboard/s...d.php?t=493090 Love the look of your truck, by the way!

Register or Log In To remove these advertisements.