Still looking.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tom · 04-29-2003, 04:26 PM

Im looking for both front fenders for my 79 c10, and also need the valence panel that goes right below the radiator opening. Fenders must be rust/dent free and no holes for trim. Would prefere somwhere close, but that aint going to happen!

**Desert Rat** · 04-29-2003, 04:51 PM

I bought 2 brand new ones they were $69.95 each and they fit fine,i also have the new $100 hood,no complaints except i cut my hand on the inside lip.

**old Rusty C10** · 04-29-2003, 05:48 PM

where did you get that cheap of a fender desert rat?

Tom · 04-29-2003, 07:39 PM

More importantly, who where they made by? Id rather go OEM stuff but its like finding a needle in a hay stack.

78SilveradoSWB · 04-29-2003, 07:55 PM

Tom:

Though you were getting some or was winning an auction OEM fenders off of ebay or something, last time I looked?

CustomChevy · 04-29-2003, 10:22 PM

i got the lower panel you need. i believe you are talking about the panel that houses the turn signals, right?

awkward shape, that is, long, not sure if UPS would take it as regular parcel.

if you still need one, will give it to you for $20 plus actual shipping cost.

also, will take photo and post it by thurs.

Tom · 04-30-2003, 04:14 PM

78sil- Yeah I was wining that auction, till the last 6min

NOS OEM fenders for $300......

customchevy- Im not sure what year it happened, but my 79 has the turn lights in the chrome housing that holds the headlights also.

bigblock73 · 04-30-2003, 07:10 PM

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

Quit being so picky and learn to weld if you don't want any holes!

Besides, if these go cheap, have someone do it for you. (they might go cheap since most people use 73-80 or 73-87 for searches).

-Jeff

78SilveradoSWB · 04-30-2003, 07:22 PM

Unfortunately Mesa is a long ways from those Jeff, and one will not SHIP and the other prefers not to.

CustomChevy · 05-03-2003, 03:08 PM

sorry have not posted yet, been a brutal week. sunday evening should have pic for you.

CustomChevy · 05-14-2003, 06:50 PM

here the pic of the panel tom.

CustomChevy · 05-14-2003, 06:50 PM

here is another photo from the front.

78SilveradoSWB · 05-15-2003, 01:33 PM

Tom:

If you're still looking, how about these?

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

alf4444 · 05-15-2003, 03:30 PM

I think the valance shown is for 78 and older isn't it? I actually have a 79 valence complete with headlight bezels (surround headlight and turn signal) and valance trim. I was going to swap it onto my 78 blazer but didn't like the look.

*1FaastC10* · 05-16-2003, 03:56 AM

Custom Chevy, are you trying to spread your truck all over the country or what? LOL if you keep it up, you're not going to have a truck left.

Tom · 05-16-2003, 11:56 AM

Quote:

Originally posted by alf4444
I think the valance shown is for 78 and older isn't it? I actually have a 79 valence complete with headlight bezels (surround headlight and turn signal) and valance trim. I was going to swap it onto my 78 blazer but didn't like the look.

Yes your right. Custom chevy, I went home and looked at my truck again, and the valence panel does not have the turn signals in it. It ends and the chrome headlight housing holds the headlight and turn signal. Thanks for the offer though

CustomChevy · 05-16-2003, 06:26 PM

that's cool. i am only aware of 3 different types of lower panels. the 73-80 (mine), one for just 80 (the rectangular lights), and the 81-87 type. it was my understanding that only the 81-up type did not have the turn signals mounted in them. when you get the one you're looking for, load a pic. would like to see it!! good luck!!!

**crossy** · 05-17-2003, 01:21 AM

VALANCE PANELS=
73-78 all the same.
79-80 the same regardless of headlight option and have holes in them for the stainless trim on front.
they all (73-80) bolt in the same and can be swapped as long as the headlight bezels are changed also.
DAVE

04-29-2003, 04:26 PM	#1
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	Still looking.... Im looking for both front fenders for my 79 c10, and also need the valence panel that goes right below the radiator opening. Fenders must be rust/dent free and no holes for trim. Would prefere somwhere close, but that aint going to happen! __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-29-2003, 05:48 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	where did you get that cheap of a fender desert rat? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-29-2003, 07:39 PM	#4
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	More importantly, who where they made by? Id rather go OEM stuff but its like finding a needle in a hay stack. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-29-2003, 07:55 PM	#5
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Tom: Though you were getting some or was winning an auction OEM fenders off of ebay or something, last time I looked? __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

04-30-2003, 04:14 PM	#7
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	78sil- Yeah I was wining that auction, till the last 6min NOS OEM fenders for $300...... customchevy- Im not sure what year it happened, but my 79 has the turn lights in the chrome housing that holds the headlights also. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-29-2003, 04:51 PM	#2
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I bought 2 brand new ones they were $69.95 each and they fit fine,i also have the new $100 hood,no complaints except i cut my hand on the inside lip.

04-29-2003, 10:22 PM	#6
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	i got the lower panel you need. i believe you are talking about the panel that houses the turn signals, right? awkward shape, that is, long, not sure if UPS would take it as regular parcel. if you still need one, will give it to you for $20 plus actual shipping cost. also, will take photo and post it by thurs.

04-30-2003, 07:10 PM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 Quit being so picky and learn to weld if you don't want any holes! Besides, if these go cheap, have someone do it for you. (they might go cheap since most people use 73-80 or 73-87 for searches). -Jeff Last edited by bigblock73; 04-30-2003 at 07:14 PM.

04-30-2003, 07:22 PM	#9
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Unfortunately Mesa is a long ways from those Jeff, and one will not SHIP and the other prefers not to. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

05-03-2003, 03:08 PM	#10
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	sorry have not posted yet, been a brutal week. sunday evening should have pic for you.

05-14-2003, 06:50 PM	#11
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	finally, pics! here the pic of the panel tom. Attached Images

05-14-2003, 06:50 PM	#12
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	here is another photo from the front. Attached Images

05-15-2003, 01:33 PM	#13
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Fenders Tom: If you're still looking, how about these? http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

05-15-2003, 03:30 PM	#14
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	I think the valance shown is for 78 and older isn't it? I actually have a 79 valence complete with headlight bezels (surround headlight and turn signal) and valance trim. I was going to swap it onto my 78 blazer but didn't like the look. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

05-16-2003, 03:56 AM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Custom Chevy, are you trying to spread your truck all over the country or what? LOL if you keep it up, you're not going to have a truck left.



Register or Log In To remove these advertisements.

05-16-2003, 06:26 PM	#17
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	that's cool. i am only aware of 3 different types of lower panels. the 73-80 (mine), one for just 80 (the rectangular lights), and the 81-87 type. it was my understanding that only the 81-up type did not have the turn signals mounted in them. when you get the one you're looking for, load a pic. would like to see it!! good luck!!!

05-17-2003, 01:21 AM	#18
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	VALANCE PANELS= 73-78 all the same. 79-80 the same regardless of headlight option and have holes in them for the stainless trim on front. they all (73-80) bolt in the same and can be swapped as long as the headlight bezels are changed also. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Register or Log In To remove these advertisements.