|
03-06-2012, 10:17 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: mexia texas
Posts: 35
|
Fuel guage wire
Just got the flipkit and arms on my 85 and am removing one of the tanks. Have been searchin but couldnt find the info i was lookin for, prob searchin wrong place anyways i need to find out what wire i need to grab to wire around my selector switch and go straight to my new sender on pass side? Hope to get some pics up soon of the calmax arms and flip kit installed
Posted via Mobile Device |
|
|
|
03-06-2012, 05:37 PM
|
#2 |
|
Registered User
Join Date: Feb 2012
Location: Austin, Arkansas
Posts: 248
|
Re: Fuel guage wire
It should be the pink wire going into the switch,and red coming out.To be sure about the red wires,connect a test light to ground,and probe the red wires at the switch,with the key ON,and activate the switch for L or R,and label them.Then,if you're only running 1 tank, connect the pink wire to the red wire of either the L,or R tank.
__________________
Always expect the unexpected,....but don't expect the unexpected to be the unexpected you expect ! I'm busier than a one-legged cat,in a sandbox! Veteran..and proud ! I can't fix what ain't broke....you want I should break it? |
|
|
|
|
03-06-2012, 06:24 PM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: mexia texas
Posts: 35
|
Re: Fuel guage wire
Thanx for the info.
Posted via Mobile Device |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
