Changing Throttle Body's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Indian113 · 03-14-2012, 09:39 AM

I bought a 2004 5.3 with a DBW throttle body, can I change out the throttle body to a cable throttle body or do I need a new intake too?

gringoloco · 03-14-2012, 10:23 AM

Should be a direct swap onto your intake. Minor re-wire and PCM programming will be required as well...

terrylgreenjr · 03-14-2012, 10:42 AM

I had a cable intake and a drive by wire intake and the vacuum line that was behind the throttle body was different. I am unsure of the year model on the intakes I have though

ls1nova71 · 03-14-2012, 01:36 PM

Quote:

Originally Posted by Indian113

I bought a 2004 5.3 with a DBW throttle body, can I change out the throttle body to a cable throttle body or do I need a new intake too?

Besides the rewiring and PCM tune changes already mentioned, you will probably find the threaded inserts where the throttle cable bracket bolts on, wont be there, just empty places where the inserts go.
Posted via Mobile Device

Indian113 · 03-14-2012, 02:49 PM

Thanks for the advice,this is all new worlds for me! I'm looking forward to getting this in my S10 it should be a better DD than the 327 I had in it.

softballnrd27 · 03-14-2012, 07:29 PM

I did the same thing and instead of trying to find inserts or a new intake I just epoxied some bolts(head down) in the empty holes. I had to round off the the bolt head but I kept it as a snug fit and then put some epoxy in the hole, put the bolt in the holes and then some more epoxy around it to keep it steady. It holds pretty good and the bolts are hidden by the engine cover any way.

Indian113 · 03-14-2012, 07:38 PM

Quote:

Originally Posted by softballnrd27

I did the same thing and instead of trying to find inserts or a new intake I just epoxied some bolts(head down) in the empty holes. I had to round off the the bolt head but I kept it as a snug fit and then put some epoxy in the hole, put the bolt in the holes and then some more epoxy around it to keep it steady. It holds pretty good and the bolts are hidden by the engine cover any way.

THANKS! thats a real good idea-I'm going to use your advice

03-14-2012, 09:39 AM	#1
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Changing Throttle Body's I bought a 2004 5.3 with a DBW throttle body, can I change out the throttle body to a cable throttle body or do I need a new intake too?

03-14-2012, 10:23 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Changing Throttle Body's Should be a direct swap onto your intake. Minor re-wire and PCM programming will be required as well... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-14-2012, 10:42 AM	#3
terrylgreenjr Registered User Join Date: Jul 2011 Location: Dallas, TX Posts: 183	Re: Changing Throttle Body's I had a cable intake and a drive by wire intake and the vacuum line that was behind the throttle body was different. I am unsure of the year model on the intakes I have though

03-14-2012, 02:49 PM	#5
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Changing Throttle Body's Thanks for the advice,this is all new worlds for me! I'm looking forward to getting this in my S10 it should be a better DD than the 327 I had in it.

03-14-2012, 07:29 PM	#6
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Changing Throttle Body's I did the same thing and instead of trying to find inserts or a new intake I just epoxied some bolts(head down) in the empty holes. I had to round off the the bolt head but I kept it as a snug fit and then put some epoxy in the hole, put the bolt in the holes and then some more epoxy around it to keep it steady. It holds pretty good and the bolts are hidden by the engine cover any way. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.