WI WTB 250 L6 Power steering brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longbed67 · 03-14-2012, 05:56 PM

Hi Looking for a power steering setup for my '67 250 L6 I have the box and will be making new lines primarily looking for the brackets and pump if the pump is no good not concerned just will use as a core to get a new one. Thanks in advance.

**michael bustamante** · 03-14-2012, 06:09 PM

I have the bracket send me an e mail and ill send you pics

longbed67 · 03-15-2012, 11:31 PM

Did you get those pix then?

tooter · 03-16-2012, 12:01 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=511657
Is this it ?

**michael bustamante** · 03-16-2012, 10:52 AM

http://67-72chevytrucks.com/vboard/s...&highlight=250
It is the third pic in this thread but the attatched bracket on the right hand side is no longer there. so what I have is the "L" shaped bracket that bolts to the waterneck housing part and the stud sticking out that bolts the manifold

longbed67 · 03-16-2012, 11:50 AM

I wasn't looking for Ram power assist, as I already have a power steering box installed... Thank you though! if someone else is looking that is a nice setup as it is all there!

**70STOVEBOLT** · 03-16-2012, 11:52 AM

Chuck, aka thelonerife has a setup for sale, tooter posted a link above.

longbed67 · 03-16-2012, 11:53 AM

Yeah I messaged him, just waiting for a response. Thank you!

**michael bustamante** · 03-16-2012, 12:28 PM

Oh no the ram setup is all gone. All i have is that 1 bracket in pic#3

old Chevy guy · 03-16-2012, 01:25 PM

I think blazer70 is going to buy the pulleys from my 250 thread. I have all sorts of bits and pieces from stuff and I seem to have some power steering parts but I think theres two diffrent kinds of set ups. Anyway heres some pictures,if I was sure what I was looking for I might find more. If you have any clear pictures it would be a help. Also I have a Nova w/250 that I'm pretty sure has power steering but its off site, gonna try and go look if it dosn't rain. Do you know if that will work?

**70STOVEBOLT** · 03-16-2012, 02:23 PM

I believe that any 250 setup for a non-integrated head (separate exhaust manifold) will work, however a 292 uses different pulley groove spacing. Do a search for 250 power steering in this forum and you will find many different threads with pics.

**PICKMUP** · 03-16-2012, 05:46 PM

There were a lot different PS systems for non-int sixes. Several offsets on the brackets and pulleys to match. Some double pulleys on WP & Alt and different belt spacing.
The safest way to get PS that fits is to see it all installed on an engine like yours with the same crank belt grooves as yours. Just getting a set of brackets may not work.

**thelonerife** · 03-16-2012, 07:04 PM

Thanks guys. I pm'ed you.

old Chevy guy · 03-16-2012, 07:35 PM

I went to my other hiding spot for old Chevys today and was able to produce a complete set up from a 250 in what I believe was a 71 nova. I have the two grove balancer the two grove water pump pulley all the brackets and slides the P/S pump and the alternater with the two groove pulley and all the bolts even. Let me know, if your still looking I can PM you a price. Otherwise I will post it up in a new thread for sale.

03-14-2012, 05:56 PM	#1
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	WTB 250 L6 Power steering brackets Hi Looking for a power steering setup for my '67 250 L6 I have the box and will be making new lines primarily looking for the brackets and pump if the pump is no good not concerned just will use as a core to get a new one. Thanks in advance. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-14-2012, 06:09 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Re: WTB 250 L6 Power steering brackets I have the bracket send me an e mail and ill send you pics __________________ 1967custom

03-16-2012, 12:01 AM	#4
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: WTB 250 L6 Power steering brackets http://67-72chevytrucks.com/vboard/s...d.php?t=511657 Is this it ? __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

03-16-2012, 10:52 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Re: WTB 250 L6 Power steering brackets http://67-72chevytrucks.com/vboard/s...&highlight=250 It is the third pic in this thread but the attatched bracket on the right hand side is no longer there. so what I have is the "L" shaped bracket that bolts to the waterneck housing part and the stud sticking out that bolts the manifold __________________ 1967custom

03-16-2012, 11:50 AM	#6
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 250 L6 Power steering brackets I wasn't looking for Ram power assist, as I already have a power steering box installed... Thank you though! if someone else is looking that is a nice setup as it is all there! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-15-2012, 11:31 PM	#3
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 250 L6 Power steering brackets Did you get those pix then? __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-16-2012, 11:52 AM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: WTB 250 L6 Power steering brackets Chuck, aka thelonerife has a setup for sale, tooter posted a link above. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-16-2012, 11:53 AM	#8
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 250 L6 Power steering brackets Yeah I messaged him, just waiting for a response. Thank you! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-16-2012, 12:28 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Re: WTB 250 L6 Power steering brackets Oh no the ram setup is all gone. All i have is that 1 bracket in pic#3 __________________ 1967custom

03-16-2012, 01:25 PM	#10
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: WTB 250 L6 Power steering brackets I think blazer70 is going to buy the pulleys from my 250 thread. I have all sorts of bits and pieces from stuff and I seem to have some power steering parts but I think theres two diffrent kinds of set ups. Anyway heres some pictures,if I was sure what I was looking for I might find more. If you have any clear pictures it would be a help. Also I have a Nova w/250 that I'm pretty sure has power steering but its off site, gonna try and go look if it dosn't rain. Do you know if that will work? Attached Images

03-16-2012, 02:23 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: WTB 250 L6 Power steering brackets I believe that any 250 setup for a non-integrated head (separate exhaust manifold) will work, however a 292 uses different pulley groove spacing. Do a search for 250 power steering in this forum and you will find many different threads with pics. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-16-2012, 05:46 PM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: WTB 250 L6 Power steering brackets There were a lot different PS systems for non-int sixes. Several offsets on the brackets and pulleys to match. Some double pulleys on WP & Alt and different belt spacing. The safest way to get PS that fits is to see it all installed on an engine like yours with the same crank belt grooves as yours. Just getting a set of brackets may not work. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-16-2012, 07:04 PM	#13
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB 250 L6 Power steering brackets Thanks guys. I pm'ed you. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-16-2012, 07:35 PM	#14
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: WTB 250 L6 Power steering brackets I went to my other hiding spot for old Chevys today and was able to produce a complete set up from a 250 in what I believe was a 71 nova. I have the two grove balancer the two grove water pump pulley all the brackets and slides the P/S pump and the alternater with the two groove pulley and all the bolts even. Let me know, if your still looking I can PM you a price. Otherwise I will post it up in a new thread for sale.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.