03-15-2012, 01:07 AM | #1 |
Registered User
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
|
cab dimension HELP
I need to know what is the measure from lip to lip
I stole this picture from ( BucksSS ) Thanks
__________________
Pancho 69 c/10 step side 454/400 with 3.07 |
03-15-2012, 10:46 AM | #2 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: cab dimension HELP
My 68 GMC shows 35¼ inches. Should be the same as others but I have a stripped out cab from my old 69 Chevy in another location and can get that later this week if someone else doesn't have a confirmation for you.
|
03-15-2012, 12:43 PM | #3 |
Registered User
Join Date: Apr 2007
Location: Foster Rhode Island
Posts: 1,176
|
Re: cab dimension HELP
That sounds right. I took that measurment before I cut the floor and rocker out of my cab. I will double check but I think thats good.I'll repost if I find something diffrent.
|
03-15-2012, 05:22 PM | #4 |
Registered User
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
|
Re: cab dimension HELP
In my cab driver side have 34 2/8 [1/4] and pass side 34 3/8 is a big gap in my pass side. I think that is the problem.
Here are some pictures from my can and I welded all corners before take off the whole floor. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device
__________________
Pancho 69 c/10 step side 454/400 with 3.07 |
03-15-2012, 07:47 PM | #5 |
Registered User
Join Date: Apr 2007
Location: Foster Rhode Island
Posts: 1,176
|
Re: cab dimension HELP
Yea I went and measured my cab again and it was really 34 and a scant 1/4. Like I said before I measured it before I cut anything out and this cab was pretty tight when I got it.
|
03-15-2012, 07:50 PM | #6 |
Registered User
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
|
Re: cab dimension HELP
Thanks guys for your support.
Posted via Mobile Device
__________________
Pancho 69 c/10 step side 454/400 with 3.07 |
03-15-2012, 07:59 PM | #7 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: cab dimension HELP
Just for the heck of it I measured more towards the bottom from where I checked this morning and it's 34 5/8 inch. So I guess the measurement is going to differ slightly depending on where you measure.
|
Bookmarks |
|
|