VT 250 Inline 6 parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rochlow · 04-08-2012, 12:49 PM

69 250 inline 6cyl with 3spd trans.

double groove water pump pullye - $50 shipped
Rochester mono jet carb - $75 shipped
Intake/manifold - $125 shipped

No power steering parts
This was a complete running motor when I pulled it. If your interested in anything else from it let me know and I will look to see if I have it.

70blazer · 04-08-2012, 07:11 PM

I will take the double groove water pump pulley, pm me your PayPal address. Do you also have the fuel line from the pump to the carb that would throw in?

Thanks, Matt
Posted via Mobile Device

Rochlow · 04-08-2012, 08:15 PM

I have the fuel line. If I can get it off with out messing it up, you can have it.
Posted via Mobile Device

**Tmend** · 04-09-2012, 02:46 AM

How much for the water inlet cover that bolts to the head shipped to 91335
Posted via Mobile Device

Rochlow · 04-09-2012, 08:36 AM

Quote:

Originally Posted by Tmend

How much for the water inlet cover that bolts to the head shipped to 91335
Posted via Mobile Device

$30 shipped

fattyarbuckle · 04-09-2012, 09:03 AM

can you send me pictures of the carb?

Rochlow · 04-09-2012, 09:18 AM

Sure. Where do want it sent too and it will have to wait til tonight.
Posted via Mobile Device

elchulo52 · 04-09-2012, 10:59 AM

Do you have the air cleaner with the extension that goes on the carb. Plus the metal pipe that attaches to the part that goes on the manifold. And the part that attaches to the manifold also.

Rochlow · 04-09-2012, 11:30 AM

Quote:

Originally Posted by elchulo52

Do you have the air cleaner with the extension that goes on the carb. Plus the metal pipe that attaches to the part that goes on the manifold. And the part that attaches to the manifold also.

I don't have that. It had an aftermarket air cleaner on it.

**Tmend** · 04-10-2012, 12:48 AM

Quote:

Originally Posted by Rochlow

$30 shipped

Just to make sure it's the part that. Opts to the head right. It's not the part the radiator hose goes on to. Also do u have a pic please if yes to all ill take it please pm me
Posted via Mobile Device

Rochlow · 04-10-2012, 08:39 AM

Quote:

Originally Posted by Tmend

Just to make sure it's the part that. Opts to the head right. It's not the part the radiator hose goes on to. Also do u have a pic please if yes to all ill take it please pm me
Posted via Mobile Device

I thought you meant the thermostat housing. I'm sure I have the part your talking about also, Let me pull it tonight and see what I'm looking at.

If you PM me your email address I can take a pic and send it

circa73 · 04-10-2012, 09:05 AM

Do you have the exhaust manifold with a decent heat riser? If so whats the price shipped to 23666?

Rochlow · 04-10-2012, 09:12 AM

The exhaust manifold is on there, but I'm not sure what the heat riser is. I could do the exhaust manifold for $75 shipped.

circa73 · 04-10-2012, 02:39 PM

Heat riser is the part of the manifold with the counterweight and clock-spring that opens to warm the intake manifold air on cold days to keep the gas from puddling. Mine is frozen and spring is busted. it runs like total crap on cold days during hard acceleration.

Rochlow · 04-10-2012, 04:05 PM

Quote:

Originally Posted by circa73

Heat riser is the part of the manifold with the counterweight and clock-spring that opens to warm the intake manifold air on cold days to keep the gas from puddling. Mine is frozen and spring is busted. it runs like total crap on cold days during hard acceleration.

I can take the manifold off and take a picture for you and let you decide. Just send me an email.

Suicide-D · 04-12-2012, 12:02 PM

I need the head. How much shipped to 77493?

Thanks
Darryl

Rochlow · 04-12-2012, 01:31 PM

Quote:

Originally Posted by Suicide-D

I need the head. How much shipped to 77493?

Thanks
Darryl

I'd have to pull it and get a quote. Shipping is what's going to hurt

Suicide-D · 04-12-2012, 02:08 PM

Quote:

Originally Posted by Rochlow

Shipping is what's going to hurt

I hear ya..that thing isn't light.

Rochlow · 04-12-2012, 03:09 PM

Quote:

Originally Posted by Suicide-D

I hear ya..that thing isn't light.

If your fine with that I will pull it and get a price on shipping.

Suicide-D · 04-12-2012, 03:14 PM

Don't go to all that trouble yet. I may get the magnifluxed one from the BCOWANWHEELS. I will let you know.

circa73 · 04-13-2012, 09:39 AM

PM send for the exhaust manifold.

dr09911 · 04-13-2012, 11:31 AM

Do you have the engine lifting brackets (one on the front and one on the back)?

Thanks...Dave

Rochlow · 04-16-2012, 08:51 PM

Sorry, guys.. Been busy and I know I owe Tmend and Cira73 pictures. I should have the night off tomorrow and can get to them.

dr09911, not sure what brackets your referring to. If you send me a pic I will take a look if I have them.

dr09911 · 04-16-2012, 09:25 PM

Rochlow...I've got a set located and agreed to. Thanks.
Dave

Rochlow · 04-16-2012, 09:30 PM

Quote:

Originally Posted by dr09911

Rochlow...I've got a set located and agreed to. Thanks.
Dave

No problem. Sorry for the delay.

04-08-2012, 12:49 PM	#1
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	250 Inline 6 parting out 69 250 inline 6cyl with 3spd trans. double groove water pump pullye - $50 shipped Rochester mono jet carb - $75 shipped Intake/manifold - $125 shipped No power steering parts This was a complete running motor when I pulled it. If your interested in anything else from it let me know and I will look to see if I have it.

04-08-2012, 07:11 PM	#2
70blazer Registered User Join Date: Jul 2002 Location: Utah Posts: 239	Re: 250 Inline 6 parting out I will take the double groove water pump pulley, pm me your PayPal address. Do you also have the fuel line from the pump to the carb that would throw in? Thanks, Matt Posted via Mobile Device __________________ 1967 Suburban, my kids call it the SuburBEAN cuz its long and green.

04-08-2012, 08:15 PM	#3
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 250 Inline 6 parting out I have the fuel line. If I can get it off with out messing it up, you can have it. Posted via Mobile Device

04-09-2012, 02:46 AM	#4
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,311	Re: 250 Inline 6 parting out How much for the water inlet cover that bolts to the head shipped to 91335 Posted via Mobile Device __________________ Some progress is better then no progress

04-09-2012, 09:03 AM	#6
fattyarbuckle Registered User Join Date: Nov 2010 Location: St. Louis Mo. Posts: 282	Re: 250 Inline 6 parting out can you send me pictures of the carb?

04-09-2012, 09:18 AM	#7
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 250 Inline 6 parting out Sure. Where do want it sent too and it will have to wait til tonight. Posted via Mobile Device

04-09-2012, 10:59 AM	#8
elchulo52 Registered User Join Date: Jun 2011 Location: Deer Park,Texas Posts: 9	Re: 250 Inline 6 parting out Do you have the air cleaner with the extension that goes on the carb. Plus the metal pipe that attaches to the part that goes on the manifold. And the part that attaches to the manifold also.

04-10-2012, 09:05 AM	#12
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: 250 Inline 6 parting out Do you have the exhaust manifold with a decent heat riser? If so whats the price shipped to 23666?

04-10-2012, 09:12 AM	#13
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 250 Inline 6 parting out The exhaust manifold is on there, but I'm not sure what the heat riser is. I could do the exhaust manifold for $75 shipped.

04-10-2012, 02:39 PM	#14
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: 250 Inline 6 parting out Heat riser is the part of the manifold with the counterweight and clock-spring that opens to warm the intake manifold air on cold days to keep the gas from puddling. Mine is frozen and spring is busted. it runs like total crap on cold days during hard acceleration.

04-12-2012, 12:02 PM	#16
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Re: 250 Inline 6 parting out I need the head. How much shipped to 77493? Thanks Darryl

04-12-2012, 03:14 PM	#20
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Re: 250 Inline 6 parting out Don't go to all that trouble yet. I may get the magnifluxed one from the BCOWANWHEELS. I will let you know.

04-13-2012, 09:39 AM	#21
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: 250 Inline 6 parting out PM send for the exhaust manifold.

04-13-2012, 11:31 AM	#22
dr09911 Registered User Join Date: Jul 2010 Location: lexington, sc Posts: 15	Re: 250 Inline 6 parting out Do you have the engine lifting brackets (one on the front and one on the back)? Thanks...Dave

04-16-2012, 08:51 PM	#23
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 250 Inline 6 parting out Sorry, guys.. Been busy and I know I owe Tmend and Cira73 pictures. I should have the night off tomorrow and can get to them. dr09911, not sure what brackets your referring to. If you send me a pic I will take a look if I have them.



Register or Log In To remove these advertisements.

04-16-2012, 09:25 PM	#24
dr09911 Registered User Join Date: Jul 2010 Location: lexington, sc Posts: 15	Re: 250 Inline 6 parting out Rochlow...I've got a set located and agreed to. Thanks. Dave

Register or Log In To remove these advertisements.