|
04-11-2012, 04:49 PM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Rust remover/sealer?
Spent the last couple hours removing rust from passenger side cab to door area. The factory caulk was loose and the seam along side the door striker was rusted and pitted pretty bad. I've got most of the rust removed mechanically, but i'm worried about it creeping back from the inside.
Using a good rust remover/sealer is the only thing I can think of to prevent that. Anyone got a good rust sealer to recommend? Or any other recommendations? Thanks.
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
04-11-2012, 05:18 PM
|
#2 |
|
Registered User
Join Date: Mar 2011
Location: Bowie Maryland
Posts: 335
|
Re: Rust remover/sealer?
Por15 is good to stop rust....
|
|
|
|
|
04-11-2012, 09:40 PM
|
#3 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Re: Rust remover/sealer?
I thought about Por15, but it won't help stop any rust behind the panel. I ordered some fast etch from Eastwood. It's supposed to remove rust and prevent it from coming back. I'll need it for some other spots around the truck as well. Got some new seam sealant and self-etching primer from them too.
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
|
04-11-2012, 09:56 PM
|
#4 |
|
Registered User
Join Date: Apr 2005
Location: LaPorte, Indiana
Posts: 109
|
Re: Rust remover/sealer?
I'd spray some fluid film on the inside panel.
__________________
78K20 350 / 400TH 3:73's, Dual Polly tanks, my old plow Trk. Now parting out. 84K20 6.2 "J" Code Diesel / 700R / 4:10's 78K20 454/400TH 3:73's Dual tanks (my new plow rig) |
|
|
|
|
04-11-2012, 10:10 PM
|
#5 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Re: Rust remover/sealer?
Thats a good idea. I'll have to find a long nozzle or some way to get it up inside, between the skin and the cab panels though..
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
