Anybody Run 17" FJ Cruiser Steel Wheels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 04-20-2012, 11:08 AM

They look like the offset if pretty good; from what I could find they are 4.5 b/s inches on a 7.5" wide wheel. The center opening looks like it would have no problem clearing our truck's hubs. It also looks like the rims could be reversed for ~3.5" backspacing on the rear for a wider lip. Anybody got pics of them mounted on a truck?

MalibuKasey · 04-20-2012, 12:17 PM

tcb-1 I think use to run those now that im thinking about it. Let me dig around.

shawno72 · 04-20-2012, 12:21 PM

Curious as well
Posted via Mobile Device

MalibuKasey · 04-20-2012, 12:27 PM

Pic dont show up.
http://67-72chevytrucks.com/vboard/s...d.php?t=393494

theastronaut · 04-20-2012, 12:30 PM

I saw his ad when I did a search yesterday, too bad the pics aren't up anymore!
Posted via Mobile Device

MalibuKasey · 04-20-2012, 12:31 PM

I sent him a PM and asked to email me one. Now.... we wait.
I think doing the small tabs on them so that you could mount an old dog dish would look killer!!

MalibuKasey · 04-20-2012, 12:33 PM

Wait I have one saved from my new logo idea!! Muhahahahahahah!!

shawno72 · 04-20-2012, 12:39 PM

I like that now just to find a way to mount a hubcap.....

MalibuKasey · 04-20-2012, 12:43 PM

Check out the way Delmo does it on his billet wheels that he did on a couple trucks. It should work on this one two.

theastronaut · 04-20-2012, 05:04 PM

Quote:

Originally Posted by MalibuKasey

Wait I have one saved from my new logo idea!! Muhahahahahahah!!

Me like! Will have to keep an eye on craigslist for a set.

gimmy 64 · 04-20-2012, 08:39 PM

i have a 2006 toyota tundra and replaced stock wheels. i measured the stock wheels and could not find anythig that would make them not fit. 4 1/2 back spaceing and the center hole was about 1/4 in. bigger than the wheels i have on mine.i did not mount them thow.

Malibob · 04-21-2012, 09:10 PM

I thought the Nissan Titan wheels worked well on these too?

theastronaut · 04-21-2012, 10:23 PM

Quote:

Originally Posted by Malibob

I thought the Nissan Titan wheels worked well on these too?

They can be made to work if you use spacers but there's way too much backspacing for them to just bolt on. The center opening isn't big enough to clear the hubs either. Another thing is, I don't think they look right without any lip- the centers come nearly all the way to the outside edge of the rim.

The backspacing and larger center opening should make FJ wheels bolt right up.
Posted via Mobile Device

Driveway Dreams · 04-22-2012, 12:22 PM

I have a set of wheels from the 90s that I bought to use the tires for my DD. They had been on a toyota but the wheels fit our trucks as well. Funny that Toyota has such big hubs, even still.
Posted via Mobile Device

bob-n · 04-23-2012, 04:33 PM

Fit great

shooter64 · 04-23-2012, 08:58 PM

bob-n do those fit with drums?

bob-n · 04-23-2012, 09:52 PM

Yes. I've had them on with drums and disks.. No problem at all. They look much better on it in person. If you were closer I'd probably make ya a deal on them!
Posted via Mobile Device

shooter64 · 04-23-2012, 10:08 PM

Quote:

Originally Posted by bob-n

Yes. I've had them on with drums and disks.. No problem at all. They look much better on it in person. If you were closer I'd probably make ya a deal on them!
Posted via Mobile Device

Damn! i love the look of those steelies too lol.what size tire are you running on those 17's
Posted via Mobile Device

bob-n · 04-23-2012, 10:19 PM

I really can't remember, I took them off to put other wheels on. I think something like 245/45? 55? If I get a chance to swing by my storage bin I'll look
Posted via Mobile Device

jankin · 09-22-2012, 09:43 PM

Running the FJ wheels with an early 90's Chevy Center Cap on my '65. No spacers. Tires are 245/45 R17.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Twiztid_66c10 · 09-22-2012, 10:36 PM

i am running a set still trying to find the right size of tires i like. took me a few months to find a set on craigslist easy to find the aluminum ones the steels only came on base models. i work at a Toyota dealership and at my cost new the are over 200 a piece found set on craigs for $250

bloodybigblock · 11-18-2012, 08:09 AM

I wonder if wheel vintiques trim rings would fit these wheels? That'd look nice
Posted via Mobile Device

mark 66 · 11-19-2012, 07:14 AM

Quote:

Originally Posted by Malibob

I thought the Nissan Titan wheels worked well on these too?

I can say for sure the titans will not work. at least on the front with stock drums.

lucifer · 11-19-2012, 12:49 PM

There is a set of 17 steelies posted on the 60-66 parta board

04-20-2012, 11:08 AM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Anybody Run 17" FJ Cruiser Steel Wheels? They look like the offset if pretty good; from what I could find they are 4.5 b/s inches on a 7.5" wide wheel. The center opening looks like it would have no problem clearing our truck's hubs. It also looks like the rims could be reversed for ~3.5" backspacing on the rear for a wider lip. Anybody got pics of them mounted on a truck? __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

04-20-2012, 12:17 PM	#2
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Anybody Run 17" FJ Cruiser Steel Wheels? tcb-1 I think use to run those now that im thinking about it. Let me dig around. __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2012, 12:21 PM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Curious as well Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

04-20-2012, 12:27 PM	#4
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Pic dont show up. http://67-72chevytrucks.com/vboard/s...d.php?t=393494 __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2012, 12:30 PM	#5
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I saw his ad when I did a search yesterday, too bad the pics aren't up anymore! Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

04-20-2012, 12:31 PM	#6
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I sent him a PM and asked to email me one. Now.... we wait. I think doing the small tabs on them so that you could mount an old dog dish would look killer!! __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2012, 12:33 PM	#7
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Wait I have one saved from my new logo idea!! Muhahahahahahah!! Attached Images __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2012, 12:39 PM	#8
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I like that now just to find a way to mount a hubcap..... __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

04-20-2012, 12:43 PM	#9
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Check out the way Delmo does it on his billet wheels that he did on a couple trucks. It should work on this one two. __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2012, 08:39 PM	#11
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: Anybody Run 17" FJ Cruiser Steel Wheels? i have a 2006 toyota tundra and replaced stock wheels. i measured the stock wheels and could not find anythig that would make them not fit. 4 1/2 back spaceing and the center hole was about 1/4 in. bigger than the wheels i have on mine.i did not mount them thow.

04-21-2012, 09:10 PM	#12
Malibob Registered User Join Date: May 2009 Location: Pittsburgh Posts: 392	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I thought the Nissan Titan wheels worked well on these too? __________________ This statement was made possible by a grant from this station and continued support from viewers like you. Flickr

04-22-2012, 12:22 PM	#14
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I have a set of wheels from the 90s that I bought to use the tires for my DD. They had been on a toyota but the wheels fit our trucks as well. Funny that Toyota has such big hubs, even still. Posted via Mobile Device __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

04-23-2012, 04:33 PM	#15
bob-n Registered User Join Date: Aug 2009 Location: Burlington, WI Posts: 52	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Fit great

04-23-2012, 08:58 PM	#16
shooter64 Registered User Join Date: Feb 2012 Location: Elyria, ohio Posts: 180	Re: Anybody Run 17" FJ Cruiser Steel Wheels? bob-n do those fit with drums?

04-23-2012, 09:52 PM	#17
bob-n Registered User Join Date: Aug 2009 Location: Burlington, WI Posts: 52	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Yes. I've had them on with drums and disks.. No problem at all. They look much better on it in person. If you were closer I'd probably make ya a deal on them! Posted via Mobile Device



Register or Log In To remove these advertisements.

04-23-2012, 10:19 PM	#19
bob-n Registered User Join Date: Aug 2009 Location: Burlington, WI Posts: 52	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I really can't remember, I took them off to put other wheels on. I think something like 245/45? 55? If I get a chance to swing by my storage bin I'll look Posted via Mobile Device

09-22-2012, 09:43 PM	#20
jankin Registered User Join Date: Jul 2012 Location: Lexington, KY Posts: 4	Re: Anybody Run 17" FJ Cruiser Steel Wheels? Running the FJ wheels with an early 90's Chevy Center Cap on my '65. No spacers. Tires are 245/45 R17. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Last edited by jankin; 09-22-2012 at 09:59 PM.

09-22-2012, 10:36 PM	#21
Twiztid_66c10 Registered User Join Date: Feb 2010 Location: The Dalles Oregon Posts: 191	Re: Anybody Run 17" FJ Cruiser Steel Wheels? i am running a set still trying to find the right size of tires i like. took me a few months to find a set on craigslist easy to find the aluminum ones the steels only came on base models. i work at a Toyota dealership and at my cost new the are over 200 a piece found set on craigs for $250 __________________ 1966 C-10 long wide- currently with 2 3/4 sectioned crossmember, 3 inch cupped a arms with 2700 bags, 67 master cylinder, in the middle of a v8 swap, soon custom rear wishbone set up and bags 1942 chevy/divco ambulance 1937 chevy truck

11-18-2012, 08:09 AM	#22
bloodybigblock Registered User Join Date: Jul 2011 Location: hanceville alabama Posts: 268	Re: Anybody Run 17" FJ Cruiser Steel Wheels? I wonder if wheel vintiques trim rings would fit these wheels? That'd look nice Posted via Mobile Device

11-19-2012, 12:49 PM	#24
lucifer Registered User Join Date: Mar 2010 Location: simcoe ontario canada Posts: 681	Re: Anybody Run 17" FJ Cruiser Steel Wheels? There is a set of 17 steelies posted on the 60-66 parta board __________________ 65 burb On the road Mar 26th Finally

Register or Log In To remove these advertisements.