SD WTB - RF fender cup patch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fredm98** · 04-21-2012, 01:00 PM

Does anyone have a halfways decent right front fender front cup?
Maybe you have a fender that is otherwise junk and you could cut off that front cup for a patch? I'm no stranger to rust repair and am fine with a little rust. What I have now is pretty far gone and I'd rather not spend the cash for a factory-made patch if I don't have to.
Thanks

old Chevy guy · 04-21-2012, 01:11 PM

Its tough too find good used ones since they all pretty much do that.Right side is worse of course from the battery. I bought one of the new ones from a board member and put it on ,it worked out pretty good. I seamed it higher that I wanted to because the fender had some damage and filler where I first cut it. You may get lucky though and somebody will have a fender for patch cuts. Good luck!

**kev2809** · 04-21-2012, 06:35 PM

i may have one. i can cut it just below the body line.

its a fender i was going to run but needed to much work. i replaced the cup with an aftermarket one, which is why i have to cut it at the body line (i used the whole cup when i replaced, which is about an inch or 2 above the body line like the pic above)

**fredm98** · 04-21-2012, 06:52 PM

Quote:

Originally Posted by kev2809

i may have one. i can cut it just below the body line.
its a fender i was going to run but needed to much work. i replaced the cup with an aftermarket one, which is why i have to cut it at the body line (i used the whole cup when i replaced, which is about an inch or 2 above the body line like the pic above)

That sounds promising. Please let me know what you find and how much you would want for it.

**kev2809** · 04-22-2012, 03:22 PM

$28 shipped? not sure what shipping will be but oh well..lol. i can cut it where i welded it at if you want.
let me know if this works for you

heres a pic of it..

**fredm98** · 04-22-2012, 08:18 PM

Quote:

Originally Posted by kev2809

$28 shipped? not sure what shipping will be but oh well..lol. i can cut it where i welded it at if you want.
let me know if this works for you
heres a pic of it..

Yes that would be perfect! Please cut where you welded it and ship however is cheapest for you. What pymt method do you prefer? I can do paypal if you like that. I'll PM you my details.

**kev2809** · 04-22-2012, 10:56 PM

sounds good..pm sent

**kev2809** · 04-23-2012, 02:05 PM

mailed out this morning with usps..

please let me know when ya get it, thanks

**fredm98** · 04-26-2012, 07:00 PM

Quote:

Originally Posted by kev2809

mailed out this morning with usps..

please let me know when ya get it, thanks

Received today. Looks great thanks a bunch!

**kev2809** · 04-26-2012, 07:21 PM

cool, np!

04-21-2012, 01:00 PM	#1
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	WTB - RF fender cup patch Does anyone have a halfways decent right front fender front cup? Maybe you have a fender that is otherwise junk and you could cut off that front cup for a patch? I'm no stranger to rust repair and am fine with a little rust. What I have now is pretty far gone and I'd rather not spend the cash for a factory-made patch if I don't have to. Thanks Attached Images

04-21-2012, 01:11 PM	#2
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: WTB - RF fender cup patch Its tough too find good used ones since they all pretty much do that.Right side is worse of course from the battery. I bought one of the new ones from a board member and put it on ,it worked out pretty good. I seamed it higher that I wanted to because the fender had some damage and filler where I first cut it. You may get lucky though and somebody will have a fender for patch cuts. Good luck! Attached Images

04-21-2012, 06:35 PM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: WTB - RF fender cup patch i may have one. i can cut it just below the body line. its a fender i was going to run but needed to much work. i replaced the cup with an aftermarket one, which is why i have to cut it at the body line (i used the whole cup when i replaced, which is about an inch or 2 above the body line like the pic above) __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-22-2012, 03:22 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: WTB - RF fender cup patch $28 shipped? not sure what shipping will be but oh well..lol. i can cut it where i welded it at if you want. let me know if this works for you heres a pic of it.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-22-2012, 10:56 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: WTB - RF fender cup patch sounds good..pm sent __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-23-2012, 02:05 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: WTB - RF fender cup patch mailed out this morning with usps.. please let me know when ya get it, thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-26-2012, 07:21 PM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: WTB - RF fender cup patch cool, np! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.