Front bagged

[91Subbed]

After installing drop spindles and front air bags my front wheels dip in on top?
What needs to be done to correct this? Or what was done wrong? Any help on this? Thanks
Posted via Mobile Device

[Pro Performance]

They have pull in at the top due to the suspension travel. When air nagged, the arms go up a lot further than on a static dropped truck. It is the nature of the suspension travel. This can be helped with a pair of aftermarket arms with corrected geometry for air bagged trucks.

For example, a good brand would be Porterbuilt.

What year truck do you have?

Check them out on our site

[91Subbed]

91 suburban. I was also told a wheel alignment would help. Aired up or aired out it still does this.
Posted via Mobile Device

[dv8customs]

Spindles usually correct it, how much drop do your spindles have?

[Pro Performance]

A wheel alignment isn't a bad idea, and do suggest it. Get it aligned at where you ride height is going to be. You will still have the lean at the top of the wheel though, but it might be better. It is always good to align either way after bagging or lowering a vehicle.

[91Subbed]

2 1/2 inch, I guess might next step is an alignment. Thanks guys
Posted via Mobile Device

[Narxoleptic Customs]

Longer upper arms...
Posted via Mobile Device

[91Subbed]

How do I get longer upper arms? Can I make them?
Posted via Mobile Device

[N2TRUX]

Answered already...

Originally Posted by 91Subbed

How do I get longer upper arms? Can I make them?

Originally Posted by Pro Performance

This can be helped with a pair of aftermarket arms with corrected geometry for air bagged trucks.

For example, a good brand would be Porterbuilt.

What year truck do you have?

Check them out on our site

[andrewmp6]

Is it the old body style or the 88-98 body style suburban?

[91Subbed]

Old square body style like the 78-87
Posted via Mobile Device

[made2drag]

Originally Posted by 91Subbed

Old square body style like the 78-87
Posted via Mobile Device

how about some pics? maybe we can tell by looking at it. 2 1/2 inch spindles should have helped, maybe we can spot something to help you out. let me know if you need to know how to post pics...(ive been asking you for pics for like 6 months....LOL)

[made2drag]

Originally Posted by 91Subbed

How do I get longer upper arms? Can I make them?
Posted via Mobile Device

an idea.... instead of longer uppers you could section like an inch behind the lca's balljoint and make the lca shorter...but make sure a professional does it and make sure you do tons of research first from expert fabricaters on this site like DV8....just an idea, but the best thing to do is get the porterbuilt arms

again, i could be wrong and anyone's welcome to set me straight. i wont take it personal

[91Subbed]

I been trying but can't seem to get the pics uploaded! Sorry man! I could email them to you...
Posted via Mobile Device

[Pro Performance]

The Porterbuilt arms can also be made 1" forward to center the wheel in the wheel well, which is a nice feature.

[91Subbed]

Will upper tube arms help the issue I'm having?
Posted via Mobile Device

[made2drag]

Originally Posted by 91Subbed

I been trying but can't seem to get the pics uploaded! Sorry man! I could email them to you...
Posted via Mobile Device

djblack67@yahoo.com