Porterbuilt Stage 1 Rear Kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fattback · 07-01-2012, 04:29 PM

Got my Porterbuilt Stage 1 Rear Kit in from Travis at Pro Performance and started working on it today. BTW Travis has been great help.

Was searching the forum for any pics of this kit installed to make sure I am headed in the right direction but can't seem to find any.

Any pics or tips of anything you guys ran into would be greatly appreciated.

Thanks
Rob

gringoloco · 07-01-2012, 06:10 PM

What all is included in the kit? Have you tried porterbuiltfabrication.com?
Posted via Mobile Device

Fattback · 07-01-2012, 06:48 PM

Yea I looked at porterbuiltfabrication.com. Seemed like lots of info on stage 2 kits. Im probable just missing it

What I would like to see is pics of the brackets that relocate the shocks with the shocks installed. Compressed and extended.

Thanks
Rob

DERF BERRY · 07-02-2012, 07:39 PM

Why dont we just go ahead and install yours i am interested to see it my self. And curios about the ride quality

Fattback · 07-02-2012, 11:29 PM

Ok got Rear Kit installed tonight. Guys let me know what you think.

Pro Performance · 07-03-2012, 12:08 AM

Just came across this right now.... the kit looks great installed! The front kit should be on it's way soon. Thanks for posting some pictures up and the good mention.

- Travis

bman67 · 10-06-2012, 04:03 PM

Fatback
How did you mount the cup to the frame? Did you have to drill two holes in the frame? It looks like I'm missing two shock relocater brackets based on your pic as well.
Posted via Mobile Device

PBFAB.COM · 10-06-2012, 06:40 PM

Quote:

Originally Posted by bman67

Fatback
How did you mount the cup to the frame? Did you have to drill two holes in the frame? It looks like I'm missing two shock relocater brackets based on your pic as well.
Posted via Mobile Device

The upper cup is located using the original coil spring mounting hole and supplied hardware. There are also upper and lower shock relocator mounts included
in the kit. Let us know what you are missing so we can make sure you get taken care of.

Nate
Posted via Mobile Device

Fattback · 10-07-2012, 01:43 AM

Quote:

Originally Posted by bman67

Fatback
How did you mount the cup to the frame? Did you have to drill two holes in the frame? It looks like I'm missing two shock relocater brackets based on your pic as well.
Posted via Mobile Device

bman

Here is a couple pics for you. Hope this helps

Rob

70blackfish · 10-14-2012, 12:48 AM

is there a single bolt in the middle holding the bottom of the bag in place?

**lolife99** · 10-14-2012, 01:07 AM

Yes
Posted via Mobile Device

bman67 · 10-25-2012, 09:17 AM

Nate,
I would like to Thank You and your team for following up with me regarding the missing parts. I received them yesterday. 100% Customer Satisfaction as always with Porterbuilt.

Brian

PBFAB.COM · 10-25-2012, 11:14 AM

Quote:

Originally Posted by bman67

Nate,
I would like to Thank You and your team for following up with me regarding the missing parts. I received them yesterday. 100% Customer Satisfaction as always with Porterbuilt.

Brian

No problem Brian. Thanks for bringing it to our attention. Glad to get you taken care of, and apologies for not getting you the correct items to begin with.

Nate

sandiego65 · 10-30-2012, 01:55 AM

Sorry to bother but do you guys have a side view with the bed mounted with it aired out? I'm curious about the kit and want to see how low it gets maybe one with a 2 inch block and mild notch???
Posted via Mobile Device

PBFAB.COM · 10-30-2012, 12:04 PM

Look here:

http://67-72chevytrucks.com/vboard/s...hlight=picacho

**lolife99** · 10-30-2012, 12:17 PM

Yes.
That is one nice truck!

chevjayfsd · 10-30-2012, 02:15 PM

Quote:

Originally Posted by lolife99

Yes.
That is one nice truck!

This pic you posted lolife has his truck lower than it was at GG... Am I missing some part of his build? What did he change to get the couple extra inches?

**lolife99** · 10-30-2012, 02:51 PM

Quote:

Originally Posted by chevjayfsd

This pic you posted lolife has his truck lower than it was at GG... Am I missing some part of his build? What did he change to get the couple extra inches?

I don't know.
You might ask him.
Added lowering block?
Removed inner fenders?
Don't know.

Groyd · 07-04-2013, 10:33 AM

I've got the porterbuilt stage 1 rear and trac bar.

I can't figure out what these parts are for? Any help?
Posted via Mobile Device

Pro Performance · 07-04-2013, 10:46 AM

Those are 4 shock studs for the shocks, that go into the shock relocator brackets.

Groyd · 07-04-2013, 11:21 AM

Quote:

Originally Posted by Pro Performance

Those are 4 shock studs for the shocks, that go into the shock relocator brackets.

Thanks!

Any idea on the spacers? I couldn't see any of this hardware in any of their pics and its not listed in the hardware on the invoice.
Posted via Mobile Device

PBFAB.COM · 07-04-2013, 11:59 AM

Quote:

Originally Posted by Groyd

Thanks!

Any idea on the spacers? I couldn't see any of this hardware in any of their pics and its not listed in the hardware on the invoice.
Posted via Mobile Device

The small zinc coated bushings are for the shocks. They reduce the bore to 1/2 for the mounting points that do not use the studs. Hope that helps! Happy Fourth!

Nate

TrixR4Kids · 07-06-2013, 12:01 AM

Waiting patiently for my Porterbuilt Stage 1 rear. Gonna be like Christmas in July..

Fattback · 07-06-2013, 11:33 AM

Quote:

Originally Posted by TrixR4Kids

Waiting patiently for my Porterbuilt Stage 1 rear. Gonna be like Christmas in July..

Great product and so worth the wait

Rob

cubber · 07-06-2013, 12:34 PM

For sure! I have the PB notch and trac bar, but I got my shock brackets from Speedway (CPP). Also have 1.5" blocks in the rear, and Stage 1 kit in the front with McGaughy's 2.5" spindles. I got all my PB stuff from Travis @ ProPerformance. If I ever do it again, I am going to go with a full kit. You don't save anything, really, by putting something together on your own. I am happy with the way my suspension turned out, and Travis's advice and Porterbuilt's quality played a big role!

07-01-2012, 04:29 PM	#1
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Porterbuilt Stage 1 Rear Kit? Got my Porterbuilt Stage 1 Rear Kit in from Travis at Pro Performance and started working on it today. BTW Travis has been great help. Was searching the forum for any pics of this kit installed to make sure I am headed in the right direction but can't seem to find any. Any pics or tips of anything you guys ran into would be greatly appreciated. Thanks Rob

07-01-2012, 06:10 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Porterbuilt Stage 1 Rear Kit? What all is included in the kit? Have you tried porterbuiltfabrication.com? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-01-2012, 06:48 PM	#3
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: Porterbuilt Stage 1 Rear Kit? Yea I looked at porterbuiltfabrication.com. Seemed like lots of info on stage 2 kits. Im probable just missing it What I would like to see is pics of the brackets that relocate the shocks with the shocks installed. Compressed and extended. Thanks Rob

07-02-2012, 07:39 PM	#4
DERF BERRY Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 1	Re: Porterbuilt Stage 1 Rear Kit? Why dont we just go ahead and install yours i am interested to see it my self. And curios about the ride quality

07-02-2012, 11:29 PM	#5
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: Porterbuilt Stage 1 Rear Kit? Ok got Rear Kit installed tonight. Guys let me know what you think.

07-03-2012, 12:08 AM	#6
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Porterbuilt Stage 1 Rear Kit? Just came across this right now.... the kit looks great installed! The front kit should be on it's way soon. Thanks for posting some pictures up and the good mention. - Travis

10-06-2012, 04:03 PM	#7
bman67 Registered User Join Date: Sep 2010 Location: DFW, TX Posts: 22	Re: Porterbuilt Stage 1 Rear Kit? Fatback How did you mount the cup to the frame? Did you have to drill two holes in the frame? It looks like I'm missing two shock relocater brackets based on your pic as well. Posted via Mobile Device

10-14-2012, 12:48 AM	#10
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Porterbuilt Stage 1 Rear Kit? is there a single bolt in the middle holding the bottom of the bag in place?

10-14-2012, 01:07 AM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt Stage 1 Rear Kit? Yes Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-25-2012, 09:17 AM	#12
bman67 Registered User Join Date: Sep 2010 Location: DFW, TX Posts: 22	Re: Porterbuilt Stage 1 Rear Kit? Nate, I would like to Thank You and your team for following up with me regarding the missing parts. I received them yesterday. 100% Customer Satisfaction as always with Porterbuilt. Brian

10-30-2012, 01:55 AM	#14
sandiego65 Registered User Join Date: Dec 2011 Location: san diego california Posts: 143	Re: Porterbuilt Stage 1 Rear Kit? Sorry to bother but do you guys have a side view with the bed mounted with it aired out? I'm curious about the kit and want to see how low it gets maybe one with a 2 inch block and mild notch??? Posted via Mobile Device

10-30-2012, 12:04 PM	#15
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt Stage 1 Rear Kit? Look here: http://67-72chevytrucks.com/vboard/s...hlight=picacho __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-30-2012, 12:17 PM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt Stage 1 Rear Kit? Yes. That is one nice truck! Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-04-2013, 10:33 AM	#19
Groyd Registered User Join Date: Apr 2009 Location: Edmond, OK Posts: 393	Re: Porterbuilt Stage 1 Rear Kit? I've got the porterbuilt stage 1 rear and trac bar. I can't figure out what these parts are for? Any help? Posted via Mobile Device __________________ 1951 Chevy 3100/S-10: http://67-72chevytrucks.com/vboard/s...d.php?t=406072 1957 Chevy 3200 1971 2WD Blazer - Sold

07-04-2013, 10:46 AM	#20
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Porterbuilt Stage 1 Rear Kit? Those are 4 shock studs for the shocks, that go into the shock relocator brackets.



Register or Log In To remove these advertisements.

07-06-2013, 12:01 AM	#23
TrixR4Kids Registered User Join Date: Feb 2009 Location: Virginia Beach Posts: 90	Re: Porterbuilt Stage 1 Rear Kit? Waiting patiently for my Porterbuilt Stage 1 rear. Gonna be like Christmas in July.. __________________ ~ Dave '68 C10 Stepside: 350/700R4

07-06-2013, 12:34 PM	#25
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Porterbuilt Stage 1 Rear Kit? For sure! I have the PB notch and trac bar, but I got my shock brackets from Speedway (CPP). Also have 1.5" blocks in the rear, and Stage 1 kit in the front with McGaughy's 2.5" spindles. I got all my PB stuff from Travis @ ProPerformance. If I ever do it again, I am going to go with a full kit. You don't save anything, really, by putting something together on your own. I am happy with the way my suspension turned out, and Travis's advice and Porterbuilt's quality played a big role! Attached Images __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver! Last edited by cubber; 07-06-2013 at 12:38 PM. Reason: Oops! Forgot pic!

Register or Log In To remove these advertisements.