1979 Chevrolet Bonanza "Big Ten" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Project77 · 08-18-2012, 10:18 PM

Okay, here is the story line! this truck hasnt been started in 5 years the guy i bought it from let his WIFE!!! drive this truck after he bought it from one of my friends and after he put a $1200 set of heads on it along with a weiland intake and a street avenger holley carb. she got it hot and then it sat for a month or so the guy drove it another 10 miles from his fathers house to his house. he thinks at the time it was a head gasket that blew so he let it set for 5 years and hasnt been started since. i just got it today for $200 because it has a rebuilt transmission and possibly a 3.73 rear end i plan on putting them in my 77 silverado. i tried to start the truck today but sounds like the starter is locked up so tmoro i am going to pull it off and clean it up a little and grease the shaft and in the mean time i am going to make sure the motor isnt locked up.

this is supposed to be a parts truck for my 77 but im not sure yet if i want to tear this whole baby apart the body is damn near rust free(besides surface rust) and the interior is in damn good condition i dont see myself being able to tear it apart just for my 77 who is a very healthy horse!

Motor:
350 (rebuilt with $1200 set of heads that were mentioned to be aluminum, wieland intake, holley street avenger carb, and only has about 5,000 miles on it all)
im not sure if the motor is still any good but if it start or even if it doesnt start i will pull it apart and send the block off to get tested and even send the heads off as well

Transmission:
Th350 with a shift kit about 3,000 miles

Rear End:
rumored to be 3.73 gears but i will pull the cover soon and check

Project77 · 08-18-2012, 10:24 PM

Name: IMG_1270.jpg
Views: 6383
Size: 46.8 KB

Project77 · 08-18-2012, 10:58 PM

Name: IMG_1271.jpg
Views: 4977
Size: 41.5 KB

Name: IMG_1272.jpg
Views: 4959
Size: 55.4 KB

Name: IMG_1273.jpg
Views: 4906
Size: 50.8 KB

Project77 · 08-18-2012, 11:02 PM

Name: IMG_1274.jpg
Views: 4959
Size: 50.2 KB

Name: IMG_1275.jpg
Views: 4862
Size: 29.1 KB

Name: IMG_1276.jpg
Views: 4816
Size: 26.4 KB

Name: IMG_1278.jpg
Views: 4971
Size: 41.8 KB

Name: IMG_1279.jpg
Views: 4822
Size: 43.6 KB

Project77 · 08-18-2012, 11:05 PM

Name: IMG_1280.jpg
Views: 4800
Size: 50.6 KB

Name: IMG_1281.jpg
Views: 5693
Size: 56.7 KB

Name: IMG_1282.jpg
Views: 4978
Size: 48.9 KB

Name: IMG_1283.jpg
Views: 4765
Size: 43.0 KB

Name: IMG_1285.jpg
Views: 5621
Size: 63.3 KB

Project77 · 08-18-2012, 11:07 PM

Name: IMG_1286.jpg
Views: 5170
Size: 62.6 KB

Name: IMG_1288.jpg
Views: 4742
Size: 27.2 KB

Name: IMG_1289.jpg
Views: 4741
Size: 37.5 KB

Name: IMG_1290.jpg
Views: 4724
Size: 37.6 KB

Name: IMG_1291.jpg
Views: 6640
Size: 59.4 KB

Project77 · 08-18-2012, 11:08 PM

Name: IMG_1293.jpg
Views: 5236
Size: 67.3 KB

JRANGER · 08-18-2012, 11:23 PM

nice

Project77 · 08-18-2012, 11:27 PM

thank you JRANGER!

does anyone know anything about these types of trucks driveline wise? what sort of options these trucks had? i need some teaching on the history of this truck so i know what i got thanks

JRANGER · 08-18-2012, 11:32 PM

Wish I did...Im a simple computer geek learning how to restore mine as I go...Still trying to figure out why a guy dropped a 305 in mine to replace the 350

frog210 · 08-18-2012, 11:34 PM

^^^ Me too

GM-power · 08-19-2012, 12:28 AM

Quote:

Originally Posted by Project77

thank you JRANGER!

does anyone know anything about these types of trucks driveline wise? what sort of options these trucks had? i need some teaching on the history of this truck so i know what i got thanks

The big ten/heavy-half(F44 option) came with a bigger leaf spring stack, bigger rear brakes, and a 12 bolt. They were made to be emission exempt. The GVWR is 6200lbs which fell over the 6000lb emission mark. Basically you got a similar payload rating to a 3/4 ton, but had a 1/2 ton without the the emission crap. I hope that's what you were looking for. Nice truck by the way!
Posted via Mobile Device

**78 Big10 454** · 08-19-2012, 02:16 AM

Looks like a solid, decent retoration project. I say go for it and get that puppy up and running.

88Jimmy4x4 · 08-19-2012, 08:26 AM

If those are $1200 aluminum heads why are they all rusty?

BIGTEN · 08-19-2012, 10:46 AM

I have that exact same truck. Dont tear it apart those are like gold of the c10s. They are beefiest trucks in the line.

Firebirdjones · 08-19-2012, 10:50 AM

Neat. My 79 1 ton is a Bonanza,,,I haven't seen another Bonanza in years.

BIGTEN · 08-19-2012, 11:14 AM

Name: 79ChevyServicePartsIdentification-100dpi.jpg
Views: 5134
Size: 60.2 KB

Hope this helps. These are all the options mine have.

Project77 · 08-19-2012, 03:21 PM

im not sure if the heads are aluminum or not but i did notice they are the only metal on the motor that has rust(surface rust) the guy i bought it from said he believes they were aluminum but he isnt sure since it was a good 5 years ago!

**Corts60** · 08-20-2012, 09:48 AM

Well aluminum doesn't rust so there's your answer. If there was white oxidation then you'd know.
Posted via Mobile Device

Ronaldo · 08-21-2012, 01:03 AM

Quote:

Originally Posted by 88Jimmy4x4

If those are $1200 aluminum heads why are they all rusty?

Amen Bro, I thought the same thing...
Ron

08-18-2012, 10:18 PM	#1
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	1979 Chevrolet Bonanza "Big Ten" Okay, here is the story line! this truck hasnt been started in 5 years the guy i bought it from let his WIFE!!! drive this truck after he bought it from one of my friends and after he put a $1200 set of heads on it along with a weiland intake and a street avenger holley carb. she got it hot and then it sat for a month or so the guy drove it another 10 miles from his fathers house to his house. he thinks at the time it was a head gasket that blew so he let it set for 5 years and hasnt been started since. i just got it today for $200 because it has a rebuilt transmission and possibly a 3.73 rear end i plan on putting them in my 77 silverado. i tried to start the truck today but sounds like the starter is locked up so tmoro i am going to pull it off and clean it up a little and grease the shaft and in the mean time i am going to make sure the motor isnt locked up. this is supposed to be a parts truck for my 77 but im not sure yet if i want to tear this whole baby apart the body is damn near rust free(besides surface rust) and the interior is in damn good condition i dont see myself being able to tear it apart just for my 77 who is a very healthy horse! Motor: 350 (rebuilt with $1200 set of heads that were mentioned to be aluminum, wieland intake, holley street avenger carb, and only has about 5,000 miles on it all) im not sure if the motor is still any good but if it start or even if it doesnt start i will pull it apart and send the block off to get tested and even send the heads off as well Transmission: Th350 with a shift kit about 3,000 miles Rear End: rumored to be 3.73 gears but i will pull the cover soon and check

08-18-2012, 10:24 PM	#2
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 10:58 PM	#3
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 11:02 PM	#4
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 11:05 PM	#5
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 11:07 PM	#6
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 11:08 PM	#7
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten"

08-18-2012, 11:23 PM	#8
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1979 Chevrolet Bonanza "Big Ten" nice __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

08-18-2012, 11:27 PM	#9
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten" thank you JRANGER! does anyone know anything about these types of trucks driveline wise? what sort of options these trucks had? i need some teaching on the history of this truck so i know what i got thanks

08-18-2012, 11:32 PM	#10
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: 1979 Chevrolet Bonanza "Big Ten" Wish I did...Im a simple computer geek learning how to restore mine as I go...Still trying to figure out why a guy dropped a 305 in mine to replace the 350 __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

08-18-2012, 11:34 PM	#11
frog210 Registered User Join Date: Mar 2012 Location: San Antonio, Tx Posts: 784	Re: 1979 Chevrolet Bonanza "Big Ten" ^^^ Me too

08-19-2012, 02:16 AM	#13
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 839	Re: 1979 Chevrolet Bonanza "Big Ten" Looks like a solid, decent retoration project. I say go for it and get that puppy up and running. __________________ 1978 Chevy SWB C-10 2WD 454/400

08-19-2012, 08:26 AM	#14
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Re: 1979 Chevrolet Bonanza "Big Ten" If those are $1200 aluminum heads why are they all rusty? __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

08-19-2012, 10:46 AM	#15
BIGTEN Registered User Join Date: Aug 2012 Location: Peoria, Arizona Posts: 58	Re: 1979 Chevrolet Bonanza "Big Ten" I have that exact same truck. Dont tear it apart those are like gold of the c10s. They are beefiest trucks in the line.

08-19-2012, 10:50 AM	#16
Firebirdjones Registered User Join Date: Oct 2009 Location: Prescott, Arizona Posts: 2,396	Re: 1979 Chevrolet Bonanza "Big Ten" Neat. My 79 1 ton is a Bonanza,,,I haven't seen another Bonanza in years.



Register or Log In To remove these advertisements.

08-19-2012, 11:14 AM	#17
BIGTEN Registered User Join Date: Aug 2012 Location: Peoria, Arizona Posts: 58	Re: 1979 Chevrolet Bonanza "Big Ten" Hope this helps. These are all the options mine have.

08-19-2012, 03:21 PM	#18
Project77 Registered User Join Date: Dec 2010 Location: Hallettsville, Texas Posts: 363	Re: 1979 Chevrolet Bonanza "Big Ten" im not sure if the heads are aluminum or not but i did notice they are the only metal on the motor that has rust(surface rust) the guy i bought it from said he believes they were aluminum but he isnt sure since it was a good 5 years ago!

08-20-2012, 09:48 AM	#19
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: 1979 Chevrolet Bonanza "Big Ten" Well aluminum doesn't rust so there's your answer. If there was white oxidation then you'd know. Posted via Mobile Device __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

Register or Log In To remove these advertisements.