Power steering mounting brackets for a 250 6cyl. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ghostvbhc · 09-19-2012, 08:51 PM

I'm trying to get some measurements on the mounting brackets for a 250 6 cyl engine since me and my dad are gonna try and make some brackets for it due to money issues and being unable to find any salvage yard to have anything close to what we need. If someone can help me out with some measurements on them, I'd appreciate it.

**WIDESIDE72** · 09-20-2012, 12:02 AM

FYI the 6 cylinder Nova PS brackets will fit a 250.

ghostvbhc · 09-20-2012, 01:17 AM

Yeah, we know that but we haven't had any luck finding any brackets from anything in any of the salvage yards around here.

geezer#99 · 09-20-2012, 09:57 AM

Maybe you just gotta bite the bullet and buy the $140 set off ebay.

ghostvbhc · 09-20-2012, 11:54 AM

We might have to but for now we don't have the money to drop $140 on a mounting bracket so we're gonna try and figure out something that could work, if not we'll then buy that one.

**VetteVet** · 09-20-2012, 12:52 PM

here is a good picture of them for a non integrated head. These are probably sold since it's an old post but it shows a good picture of them.

http://67-72chevytrucks.com/vboard/s...d.php?t=427289

longbed67 · 09-20-2012, 01:04 PM

Throw out a WTB add on the forum, you usually can pick them up for less than $50

ghostvbhc · 09-20-2012, 02:47 PM

On this forum or the other one?

ghostvbhc · 09-20-2012, 07:02 PM

Because, I'm not able to post on that forum.

geezer#99 · 09-20-2012, 07:24 PM

THat's right. Another 25 bucks you don't have.

jmsaunders · 09-20-2012, 07:29 PM

I've got mine soaking to get some of the grease and crude off them for the night. I'll pull them out and take pics and post them tomorrow.

ghostvbhc · 09-20-2012, 07:54 PM

If you could give me some measurements for the brackets, I'd appreciate it.

PanelDeland · 09-20-2012, 08:59 PM

Keep in mind that brackets are only part of the equation.You will need to have a pump with pulley and the crank pulley to use,so you can mock everything up in alignment.

**LockDoc** · 09-20-2012, 09:12 PM

Quote:

Originally Posted by PanelDeland

Keep in mind that brackets are only part of the equation.You will need to have a pump with pulley and the crank pulley to use,so you can mock everything up in alignment.

And a double water pump pulley...

LockDoc

jmsaunders · 09-21-2012, 10:26 AM

Hope these help

jmsaunders · 09-21-2012, 10:28 AM

part 2

jmsaunders · 09-21-2012, 10:29 AM

part 3

jmsaunders · 09-21-2012, 10:30 AM

46

jmsaunders · 09-21-2012, 10:32 AM

47

jmsaunders · 09-21-2012, 10:32 AM

last one. Hope these help you get the measurements that you need.

ghostvbhc · 09-21-2012, 12:10 PM

Those are gonna work just fine. Thanks man!

Quote:

Originally Posted by PanelDeland

Keep in mind that brackets are only part of the equation.You will need to have a pump with pulley and the crank pulley to use,so you can mock everything up in alignment.

Yeah, we have the pump with the pulley and everything else we need right now, we just haven't had any luck finding any kind of brackets that could work though.

jmsaunders · 09-21-2012, 11:08 PM

[QUOTE=ghostvbhc;5604669]Those are gonna work just fine. Thanks man!

not a problem. I know these brackets are getting harder to find. Took me about 3 months to finally find a set.

09-19-2012, 08:51 PM	#1
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Power steering mounting brackets for a 250 6cyl. I'm trying to get some measurements on the mounting brackets for a 250 6 cyl engine since me and my dad are gonna try and make some brackets for it due to money issues and being unable to find any salvage yard to have anything close to what we need. If someone can help me out with some measurements on them, I'd appreciate it.

09-20-2012, 12:02 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Power steering mounting brackets for a 250 6cyl. FYI the 6 cylinder Nova PS brackets will fit a 250.

09-20-2012, 01:17 AM	#3
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Re: Power steering mounting brackets for a 250 6cyl. Yeah, we know that but we haven't had any luck finding any brackets from anything in any of the salvage yards around here.

09-20-2012, 09:57 AM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,777	Re: Power steering mounting brackets for a 250 6cyl. Maybe you just gotta bite the bullet and buy the $140 set off ebay.

09-20-2012, 11:54 AM	#5
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Re: Power steering mounting brackets for a 250 6cyl. We might have to but for now we don't have the money to drop $140 on a mounting bracket so we're gonna try and figure out something that could work, if not we'll then buy that one.

09-20-2012, 12:52 PM	#6
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,723	Re: Power steering mounting brackets for a 250 6cyl. here is a good picture of them for a non integrated head. These are probably sold since it's an old post but it shows a good picture of them. http://67-72chevytrucks.com/vboard/s...d.php?t=427289 __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

09-20-2012, 01:04 PM	#7
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Power steering mounting brackets for a 250 6cyl. Throw out a WTB add on the forum, you usually can pick them up for less than $50 __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

09-20-2012, 02:47 PM	#8
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Re: Power steering mounting brackets for a 250 6cyl. On this forum or the other one?

09-20-2012, 07:02 PM	#9
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Re: Power steering mounting brackets for a 250 6cyl. Because, I'm not able to post on that forum.

09-20-2012, 07:24 PM	#10
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,777	Re: Power steering mounting brackets for a 250 6cyl. THat's right. Another 25 bucks you don't have.

09-20-2012, 07:29 PM	#11
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. I've got mine soaking to get some of the grease and crude off them for the night. I'll pull them out and take pics and post them tomorrow. __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

09-20-2012, 07:54 PM	#12
ghostvbhc Registered User Join Date: Sep 2012 Location: Norfolk, Virginia Posts: 106	Re: Power steering mounting brackets for a 250 6cyl. If you could give me some measurements for the brackets, I'd appreciate it.

09-20-2012, 08:59 PM	#13
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Power steering mounting brackets for a 250 6cyl. Keep in mind that brackets are only part of the equation.You will need to have a pump with pulley and the crank pulley to use,so you can mock everything up in alignment. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-21-2012, 10:26 AM	#15
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. Hope these help Attached Images __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

09-21-2012, 10:28 AM	#16
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. part 2 Attached Images __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )



Register or Log In To remove these advertisements.

09-21-2012, 10:29 AM	#17
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. part 3 Attached Images __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

09-21-2012, 10:30 AM	#18
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. 46 Attached Images __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

09-21-2012, 10:32 AM	#19
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. 47 Attached Images __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

09-21-2012, 11:08 PM	#22
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Re: Power steering mounting brackets for a 250 6cyl. [QUOTE=ghostvbhc;5604669]Those are gonna work just fine. Thanks man! not a problem. I know these brackets are getting harder to find. Took me about 3 months to finally find a set. __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

Register or Log In To remove these advertisements.