Lock-Right in a 12 Bolt

[76k10]

Can anyone share their experience with a lock-right in their 12 bolt? I'm considering one for my rig with 35s and hopefully I can do hills and rocks a little better.

Spare me the swap in a 14 bolt bull.

[Redcap]

Swap in a 14 bolt.

[Mr. 250r]

Before we completely ignore 14 bolts, do you not want one because it would possibly require all new wheels or you don't want to buy one?

Normally i never agree with redcap on anything but in this case i will only because it is more than a street truck it seems and rocks and lockers will break stuff majority of the time

[special-K]

I wouldn't use a Loc-Right for rocks. You'd be ok with everything else. Rocks require ultimate strength and can break even the toughest axle,locker,whatever. It's total resistance and every part in the drivetrain is put to the test. Unless you build it beefy from front to back,the weakest link will break.

[jjzepplin]

My buddy had a 14boltff in a land cruiser with a 44 up front, 350FI sm4spd.Thing went through the Rubicon with EASE! Inspired me to get the same but 60front. Can you say indestructible??? Mine also went thru the Rubicon..not as easy as his cruiser but not a big problem.

[76k10]

Thanks for the replies, too bad no one actually answered the question at hand.
Posted via Mobile Device

[Redcap]

Originally Posted by 76k10

Thanks for the replies, too bad no one actually answered the question at hand.
Posted via Mobile Device

You are wanting to use a weak locker in a weak axle with 35s and then go play on rocks? I'm not surprised that no one answered the question. Most people have better sense.

[76k10]

Originally Posted by Redcap

You are wanting to use a weak locker in a weak axle with 35s and then go play on rocks? I'm not surprised that no one answered the question. Most people have better sense.

It was just a simple question. If you don't know the answer why post?
Posted via Mobile Device

[Redcap]

Originally Posted by 76k10

It was just a simple question. If you don't know the answer why post?
Posted via Mobile Device

I do know the answer, however I was hoping your reading comprehension would take over and garner from my posts that a lockright in a 12bolt with 35s on rocks isn't a great idea and won't last very long. Apparently, I was wrong. If you want to waste money on locking a 12 bolt and subsequently grenading it, be my guest.

You do know that 14bolt FF rears are cheap and the Detroit locker for them is under $500, right?

[turp mcspray]

I have ran a lock-rite in my blazer since the late 90's. I used to run in the rocks with 36" swampers. I never had any issues in the rocks. I tried to climb a steep hill once, in 2 lo, and wiped out the teeth on a side gear. Lock-rite replaced it, and the second on has been in use ever since. If I had to do it over again, I would have bought a Detroit locker instead.

[Redcap]

I ran Lock-Rights front and back (D44/9.25) in a 70s Power Wagon with a 4speed and a 383 a few years ago. They both were warrantied in under 3 months due to rounding the teeth off. Second set, the rear survived longer than the front. A Detroit has better road manners. This is in a NP435/NP205 truck on 33x10.5 Swampers.

My experience with the Lock-Right is not isolated, I know a couple other people that made the same mistake.

The Lock-Right seems to hold up fine on the street, for what that is worth. But offroad in a heavy truck? They suck.

[powerdriver 1958]

Gentlemen , A reminder from the rules .

III. No pissing matches. Its fine to disagree, but once a thread has run its course, and degenerated into little more than an insult fest, it will be locked. While this will require a judgment call by the Administrators & Moderators. The members of this site can keep our moderating to a minimum by exercising a little discretion and self- control. Excessive profanity will lead to a 24 hour suspension at the Administrations discretion