CA WTB Screws for bezel guage

[Caudillo64]

I'm looking for the 7 screws that bolt the guage bezel to the guage cluster. I bought a used Bezel but didn't have screws.

[dean jendro]

Like these?

http://www.classicparts.com/1960-66-...ctinfo/24-626/

[LostMy65]

Originally Posted by dean jendro

Like these?

http://www.classicparts.com/1960-66-...ctinfo/24-626/

I don't think those are what he's looking for.
Those are for mounting the whole unit to the dash.
He needs the little ones that go to back.
Posted via Mobile Device

[dean jendro]

Sorry. Try the local wrecking yard for another panel with all the screws.

[dean jendro]

Caudillo64. I have a gauge cluster in my storage. I'll pull it out when I get home tonite and see what it uses for screws. It will probably be a common hardware store item. If it's unusual I'll take a picture and measurement for you.

[Caudillo64]

Originally Posted by dean jendro

Caudillo64. I have a gauge cluster in my storage. I'll pull it out when I get home tonite and see what it uses for screws. It will probably be a common hardware store item. If it's unusual I'll take a picture and mesurement for you.

Great thanks.

[dean jendro]

Caudillo64
They are just hex headed #6 sheet metal screws but they can't be any longer than 5/16 inch of threads. They have a blunt point also so you might have to knock the sharp point off a normal s/m screw to get the length. Here's a couple of shots although not so clear with my cheapo camera on the up close shots. Good luck.
Dean

[Caudillo64]

Originally Posted by dean jendro

Caudillo64
They are just hex headed #6 sheet metal screws but they can't be any longer than 5/16 inch of threads. They have a blunt point also so you might have to knock the sharp point off a normal s/m screw to get the length. Here's a couple of shots although not so clear with my cheapo camera on the up close shots. Good luck.
Dean

Ok Thanks I really appericate you taking the time hope I can return the favor sometime.

[dean jendro]

You are very welcome. Any time.