For Sale--gm Sb Bedsides Near Mint Shape!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wildmanaaron · 05-30-2003, 10:31 AM

I have a near mint set of 67-72 Shortbed bedsides for sale now. They came from a truck from out WEST somewhere. I no longer need them and they are in my way! The are almost rust-free, with just one small 2" square place in the taillight pocket where the taillight housings mount on one side. Otherwise they are rust free. There is a alot of surface rust that has come back after letting them set in my garage for a couple of months sanded down with no primer. Every molding hole has been welded up as well as the side marker lights, but I am sure that you could reverse it all if desired.

The LH back side has two small rust holes that I found when I was grinding the paint off, but would be unoticable when the wheel tubs were installed. They are smaller than a eraser on the end of a pencil. And as shown in the pic below, the LH side was also drowned with BONDO to cover up a solid dent that is in the rear section of the flat portion of the panel. It is a solid dent, not a complex one. The RH side had several very small pin holes around the wheel opening and that was professionally repaired. It welded up nicely and will not be noticed even from the bottom!

This set was going to be used for my project, but never installed!
$250 each or buy the pair for $400!! New SB bedsides cannot be bought for the price of one of mine!!

For more info, email me at: wildmanaaron@hotmail.com or call me at (270) 647-1461. I am located in Bowling Green, Ky and I do not want to ship these at all. Thanks!!

wildmanaaron · 05-30-2003, 10:33 AM

PIC

wildmanaaron · 05-30-2003, 10:40 AM

PIC

I have 8 pictures that I want to post, email me if you want them sent to you!!

wildmanaaron · 05-30-2003, 05:18 PM

MORE PICS

wildmanaaron · 05-30-2003, 05:22 PM

PICS

wildmanaaron · 05-30-2003, 05:49 PM

PICS

wildmanaaron · 05-30-2003, 06:02 PM

PICS

wildmanaaron · 05-30-2003, 06:07 PM

SOMEONE MAKE ME AN OFFER PLEASE!!

wildmanaaron · 05-30-2003, 06:11 PM

LAST ONE OF THE PICS

firedog · 05-31-2003, 12:26 AM

dont have the cash but willing to trade have a 72 lwb rolling chassis and a 68 a/c cab thats in pretty good shape and a nice 67 drivers fender let me know if you are interested

wildmanaaron · 06-02-2003, 05:14 PM

Thanks but I don't have any use for a frame or fenders. I will ship these if someone will pay the Truck Freight charges!!

PLEASE GET THEM OUT OF MY WAY!!

wildmanaaron · 06-08-2003, 09:38 PM

Nobody build shortbeds anymore??

**67sss** · 06-08-2003, 10:33 PM

Let me find out tomorrow who I want you to ship them thru and I'll get back to you.

05-30-2003, 10:31 AM	#1
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	For Sale--gm Sb Bedsides Near Mint Shape!! I have a near mint set of 67-72 Shortbed bedsides for sale now. They came from a truck from out WEST somewhere. I no longer need them and they are in my way! The are almost rust-free, with just one small 2" square place in the taillight pocket where the taillight housings mount on one side. Otherwise they are rust free. There is a alot of surface rust that has come back after letting them set in my garage for a couple of months sanded down with no primer. Every molding hole has been welded up as well as the side marker lights, but I am sure that you could reverse it all if desired. The LH back side has two small rust holes that I found when I was grinding the paint off, but would be unoticable when the wheel tubs were installed. They are smaller than a eraser on the end of a pencil. And as shown in the pic below, the LH side was also drowned with BONDO to cover up a solid dent that is in the rear section of the flat portion of the panel. It is a solid dent, not a complex one. The RH side had several very small pin holes around the wheel opening and that was professionally repaired. It welded up nicely and will not be noticed even from the bottom! This set was going to be used for my project, but never installed! $250 each or buy the pair for $400!! New SB bedsides cannot be bought for the price of one of mine!! For more info, email me at: wildmanaaron@hotmail.com or call me at (270) 647-1461. I am located in Bowling Green, Ky and I do not want to ship these at all. Thanks!! Attached Images

05-30-2003, 10:33 AM	#2
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	PIC Attached Images

05-30-2003, 10:40 AM	#3
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	PIC I have 8 pictures that I want to post, email me if you want them sent to you!! Attached Images

05-30-2003, 05:18 PM	#4
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	MORE PICS Attached Images

05-30-2003, 05:22 PM	#5
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	PICS Attached Images

05-30-2003, 05:49 PM	#6
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	PICS Attached Images

05-30-2003, 06:02 PM	#7
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	PICS Attached Images

05-30-2003, 06:07 PM	#8
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	SOMEONE MAKE ME AN OFFER PLEASE!!

05-30-2003, 06:11 PM	#9
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	LAST ONE OF THE PICS Attached Images

05-31-2003, 12:26 AM	#10
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	dont have the cash but willing to trade have a 72 lwb rolling chassis and a 68 a/c cab thats in pretty good shape and a nice 67 drivers fender let me know if you are interested __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

06-02-2003, 05:14 PM	#11
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Thanks but I don't have any use for a frame or fenders. I will ship these if someone will pay the Truck Freight charges!! PLEASE GET THEM OUT OF MY WAY!!

06-08-2003, 09:38 PM	#12
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Nobody build shortbeds anymore??

06-08-2003, 10:33 PM	#13
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	bed sides Let me find out tomorrow who I want you to ship them thru and I'll get back to you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.