208 to 205 TC swap question...

[gmachinz]

Okay-I bought an 86 4X4 project truck from somebody else who basically dropped a standard 2WD cab and box on a shortbox 4X4 frame with no lift and the drivetrain based on the casting numbers is a 74-77 vintage 205 transfer case and a GM Goodwrench crate 350 with a TH350 trans.

In my quest to make the interior as correct as possible, I have added the 4x4 light socket and switch wiring which would extend down to the transfer case through the hole in the floor but I can't find any info on what parts I need to have the 4x4 shifter actuate the switch-I have a few spare 208 brackets and obviously the throws for a 205 are basically opposite and I seen a few 205 equipped trucks at local boneyards but they too lack the 4x4 switch and bracket as well. Am I just having bad luck or what? I need to know what to look for in terms of the correct switch bracket....anybody have an exploded view of the parts required to make it work?