|
|
|
10-25-2012, 05:02 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: greensboro,NC
Posts: 276
|
engine questions
I have an 82 c10 with original engine its a 250 4.1 with th350 transmission,
Someone is selling me a 1963 283 v8 engine with transmission, the only bad thing is thay its missing the fan and other front things, I want to know if I can use my 250 fan on that 283, also he said the transmission has no tail shaft, I also want to know if I can use my transmission or swap the tailshaft, He is selling it for $200 reason I want to change engine is because my 250 has a leak on the tailshaft, also leak on water pump, and gas leak on the base of the carburator and I have already invested time and money on my 250 as u can see on the pics, any advice? Posted via Mobile Device |
|
|
|
10-25-2012, 05:03 PM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: greensboro,NC
Posts: 276
|
Re: engine questions
Sorry picture is upside down, my phone did it
Posted via Mobile Device |
|
|
|
|
10-25-2012, 05:11 PM
|
#3 |
|
Registered User
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: engine questions
Geee, for a moment I thought you rolled your truck.
John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
|
|
|
|
10-25-2012, 05:13 PM
|
#4 |
|
Registered User
Join Date: Apr 2012
Location: greensboro,NC
Posts: 276
|
Re: engine questions
Lol I knew someone would say that
Posted via Mobile Device |
|
|
|
|
10-26-2012, 07:38 AM
|
#5 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: engine questions
u are gonna need a bigger radiator,all the different brackets for power st. pump,air cond. compressor, also i would find a v8 fan, your trans will bolt up but you may need a different convertor?? you will need new exhaust
why not just fix your 250 it is way better on gas than that 283 will be not to mention you should replace every gasket in that 283.. how many miles on the 283??? |
|
|
|
|
10-26-2012, 08:29 AM
|
#6 |
|
Registered User
Join Date: Apr 2012
Location: greensboro,NC
Posts: 276
|
Re: engine questions
I have no idea how many miles
Posted via Mobile Device |
|
|
|
|
10-26-2012, 09:12 AM
|
#7 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: engine questions
just my opinion but i think you will be money ahead fixin the issues with your 250.
if you seriously want to switch to a v8 save your money and buy a rebuilt or a crate engine around 1200-1800...... |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
