Tie rod ends, Steering Link installation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cclaeys · 11-03-2012, 09:31 AM

Have a 1970 Jimmy 4wd, when I removed the steering link (think that is what it is called) between knuckles it was installed from the top, every picture I have seen has it installed from the bottom. I replaced the tie rod ends but it seems like the taper of the holes that these install into is from the top? Cant be that installed the knuckles wrong because there is only one way to install them with the drag link, any ideas?

**lolife99** · 11-09-2012, 01:47 PM

Any 4x4 guys out there that can help with this thread?

11-03-2012, 09:31 AM	#1
cclaeys Registered User Join Date: Aug 2012 Location: slc, ut Posts: 18	Tie rod ends, Steering Link installation Have a 1970 Jimmy 4wd, when I removed the steering link (think that is what it is called) between knuckles it was installed from the top, every picture I have seen has it installed from the bottom. I replaced the tie rod ends but it seems like the taper of the holes that these install into is from the top? Cant be that installed the knuckles wrong because there is only one way to install them with the drag link, any ideas?

11-09-2012, 01:47 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Tie rod ends, Steering Link installation Any 4x4 guys out there that can help with this thread? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.